This is a multi-part message in MIME format.

------=_NextPart_000_0005_01C6A10C.353E6980
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Supported but degration due to unknown/ CRC issues
_____________________________________________

Controller accepted, listed, functional, ATA-133 addressed
but after 2 days there are re-occuring CRC issues -downgrading from =
ATA133 to ATA100, ATA 66.

dmesg:=20
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
       =
xxx@xxx.xxx:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/hom=
e/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory =3D 127 MB
avail memory =3D 116 MB
BIOS32 rev. 0 found at 0xfb3e0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (Covington) (686-class), 337.52 MHz, id 0x651
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443LX PCI AGP Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe2000000, size 0x1000000
ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Intel i740 Graphics Accelerator (rev. =
0x21)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host =
Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge, =
revision 0x01) at pci0 dev 7 function 3 not configured
iteide0 at pci0 dev 15 function 0
iteide0: Integrated Technology Express IDE controller (rev. 0x13)
iteide0: bus-master DMA support present
iteide0: primary channel wired to native-PCI mode
iteide0: using irq 10 for native-PCI interrupt
atabus2 at iteide0 channel 0
iteide0: secondary channel wired to native-PCI mode
atabus3 at iteide0 channel 1
rtk0 at pci0 dev 16 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 12
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb1 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,3
sb1: Creative ViBRA16X PnP Audio: dsp v4.16
audio0 at sb1: half duplex, mmap, independent
mpu0 at sb1
midi1 at mpu0: SB MPU-401 MIDI UART
opl0 at sb1: model OPL3
midi2 at opl0: SB Yamaha OPL3
joy0 at isapnp0 port 0x201/1
joy0: Creative ViBRA16X PnP Game
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 2B020H1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 19541 MB, 39703 cyl, 16 head, 63 sec, 512 bytes/sect x 40020624 =
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <ATAPI CD-ROM DRIVE 32X MAXIMUM, , 322P> cdrom =
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)
wd1 at atabus2 drive 0: <Maxtor 6L080P0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 =
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(iteide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

____________________
I guess a P-II system cannot handle the controller or ATA-133 speeds =
(seems obvious) but why the CRC issues + data-write errorsthat =
accumulate in time -=20


------=_NextPart_000_0005_01C6A10C.353E6980
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Supported but degration due to unknown/ =
CRC=20
issues</FONT></DIV>
<DIV><FONT face=3DArial=20
size=3D2>_____________________________________________</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Controller accepted, listed, =
functional, ATA-133=20
addressed</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but after 2 days there are re-occuring =
CRC issues=20
-downgrading from ATA133 to ATA100, ATA 66.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>dmesg: </FONT></DIV>
<DIV><PRE>NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
       =
xxx@xxx.xxx:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/hom=
e/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory =3D 127 MB
avail memory =3D 116 MB
BIOS32 rev. 0 found at 0xfb3e0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (Covington) (686-class), 337.52 MHz, id 0x651
cpu0: features =
183f9ff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR&gt;
cpu0: features 183f9ff&lt;PGE,MCA,CMOV,PAT,PSE36,MMX&gt;
cpu0: features 183f9ff&lt;FXSR&gt;
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443LX PCI AGP Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe2000000, size 0x1000000
ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Intel i740 Graphics Accelerator (rev. =
0x21)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host =
Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge, =
revision 0x01) at pci0 dev 7 function 3 not configured
iteide0 at pci0 dev 15 function 0
iteide0: Integrated Technology Express IDE controller (rev. 0x13)
iteide0: bus-master DMA support present
iteide0: primary channel wired to native-PCI mode
iteide0: using irq 10 for native-PCI interrupt
atabus2 at iteide0 channel 0
iteide0: secondary channel wired to native-PCI mode
atabus3 at iteide0 channel 1
rtk0 at pci0 dev 16 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 12
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb1 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,3
sb1: Creative ViBRA16X PnP Audio: dsp v4.16
audio0 at sb1: half duplex, mmap, independent
mpu0 at sb1
midi1 at mpu0: SB MPU-401 MIDI UART
opl0 at sb1: model OPL3
midi2 at opl0: SB Yamaha OPL3
joy0 at isapnp0 port 0x201/1
joy0: Creative ViBRA16X PnP Game
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: &lt;Maxtor 2B020H1&gt;
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 19541 MB, 39703 cyl, 16 head, 63 sec, 512 bytes/sect x 40020624 =
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: &lt;ATAPI CD-ROM DRIVE 32X MAXIMUM, , 322P&gt; =
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)
wd1 at atabus2 drive 0: &lt;Maxtor 6L080P0&gt;
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 =
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(iteide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 =
emulation)</PRE><PRE>&nbsp;</PRE><PRE>____________________</PRE><PRE>I =
guess a P-II system cannot handle the controller or ATA-133 speeds =
(seems obvious) but why the CRC issues + data-write errors<BR>that =
accumulate in time - </PRE></DIV></BODY></HTML>

------=_NextPart_000_0005_01C6A10C.353E6980--