On Thu, Mar 31, 2005 at 10:17:35AM -0500, Greg Troxel wrote:
> If that doesn't work, post your dmesg output.  Given that your machine
> has only 64 MB, also try RBUS_MIN_START at 256MB or even 128MB if
> 512MB doesn't work.

I have compiled a kernel with options RBUS_MIN_START="0x10000000", but
it still gives the same message.  Here's the dmesg: 


NetBSD 2.0.2 (TOSHIBA) #0: Thu Mar 31 23:36:34 CEST 2005
	geert@lori.mine.nu:/home/geert/netbsd/src/sys/arch/i386/compile/obj/TOSHIBA
total memory = 65020 KB
avail memory = 56132 KB
BIOS32 rev. 0 found at 0xfc46d
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (686-class), 284.03 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/IX+MV (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 5 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 5 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 5 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x03) at pci0 dev 5 function 3 not configured
Lucent Technologies LTMODEM (miscellaneous communications, revision 0x01) at pci0 dev 7 function 0 not configured
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: Toshiba ToPIC100 CardBus-PCI Bridge (rev. 0x20)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 11 function 1: Toshiba ToPIC100 CardBus-PCI Bridge (rev. 0x20)
cbb1: NOT USED because of unconfigured interrupt
yds0 at pci0 dev 12 function 0: Yamaha 744 (DS-1S) Audio (rev. 0x02)
yds0: interrupting at irq 11
yds0: ac97: Asahi Kasei AK4541/AK4543 codec; headphone, 18 bit DAC, 18 bit ADC, AKM 3D
yds0: ac97: ext id 200<AMAP>
audio0 at yds0: full duplex, mmap, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
opl0 at yds0: model OPL3
midi1 at opl0: DS-1 integrated Yamaha OPL3
mpu0 at yds0
midi2 at mpu0: Yamaha DS-1 MIDI UART
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5..10
pcic0: using irq 5 for socket events
Kernelized RAIDframe activated
ep0 at pcmcia0 function 0uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
pcic0: port 0x400-0x40f
: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:4b:a4:49:48, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10base2)
wd0 at atabus0 drive 0: <TOSHIBA MK6014MAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 5729 MB, 12416 cyl, 15 head, 63 sec, 512 bytes/sect x 11733120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E-B, , 7.6G> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
PCMCIA LAN, Ethernet, A004743118001 (manufacturer 0xffffffff, product 0xffffffff) at pcmcia1,  function 0 not configured
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 10
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


(ep0 is another, working, PCMCIA card)  

GH

-- 
:wq