I have a similar problem when booting (1.5.2, 1.6 and a current
kernel), but the pause only occurs when probing the cdrom (the hard
disk is probed fairly quickly). I notice you have two CD-ROM drives,
and a ZIP drive as well as a couple of hard disks: is the pause
occuring when all are probed or only for certain devices? Maybe there
is a connection with how the code deals with CD/removeable atapi
drives....

 --- netbsd@ns.purk.ee wrote: > Hi
> 
> I'm trying to figure out what causing slow boot on Abit Max2 running
> both stable&current.
> The main problem is that , when kernel arrivers to 'pciide' it stops
> and waits 20/sec.Theres no problem with FreeBSD.It takes 25/sec to
> boot into Gnome desktop.It just
> flying on pciide.Is there any kernel option that i'm missing?
> 
> Thanks for any hint!
> 
> 
> Dmesg:
> 
> NetBSD 1.6N (workstation3) #0: Tue Apr  1 22:57:19 EEST 2003
>     root@NetBSD:/usr/src/sys/arch/i386/compile/workstation3
> total memory = 1023 MB
> avail memory = 943 MB
> using 6144 buffers containing 52508 KB of memory
> BIOS32 rev. 0 found at 0xfb710
> mainbus0 (root)
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon XP 1900+ (686-class), 1600.82 MHz, id 0x662
> cpu0: features
> c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
> cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
> cpu0: L2 cache 256 KB 64b/line 16-way
> cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully
> associative
> cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
> cpu0: 8 page colors
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies product 0x3189 (rev. 0x00)
> agp0 at pchb0: aperture at 0xc0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb168 (rev.
> 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0171
> (rev. 0xa3)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> bktr0 at pci0 dev 8 function 0
> bktr0: interrupting at irq 12
> bktr0: FlyVideo, Philips FR1216 PAL FM tuner.
> radio0 at bktr0
> Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at
> pci0 dev 8 function 1 not configured
> ahc1 at pci0 dev 9 function 0
> ahc1: interrupting at irq 11
> ahc1: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs
> scsibus0 at ahc1: 16 targets, 8 luns per target
> Texas Instruments TSB43AA23 OHCI IEEE 1394 Host Controller (Firewire
> serial bus, interface 0x10) at pci0 dev 13 function 0 not configured
> uhci0 at pci0 dev 14 function 0: VIA Technologies VT83C572 USB
> Controller (rev. 0x50)
> uhci0: interrupting at irq 7
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 14 function 1: VIA Technologies VT83C572 USB
> Controller (rev. 0x50)
> uhci1: interrupting at irq 12
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub1: 2 ports with 2 removable, self powered
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20,
> revision 0x51) at pci0 dev 14 function 2 not configured
> uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB
> Controller (rev. 0x80)
> uhci2: interrupting at irq 10
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB
> Controller (rev. 0x80)
> uhci3: interrupting at irq 12
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub3: 2 ports with 2 removable, self powered
> uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB
> Controller (rev. 0x80)
> uhci4: interrupting at irq 11
> usb4 at uhci4: USB revision 1.0
> uhub4 at usb4
> uhub4: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub4: 2 ports with 2 removable, self powered
> VIA Technologies product 0x3104 (USB serial bus, interface 0x20,
> revision 0x82) at pci0 dev 16 function 3 not configured
> pcib0 at pci0 dev 17 function 0
> pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev.
> 0x00)
> pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133
> controller
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> atapibus0 at pciide0 channel 0: 2 targets
> sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI       Flopp, ,
> 12.A> disk removable
> sd0: 98288 KB, 96 cyl, 64 head, 32 sec, 512 bytes/sect x 196576
> sectors
> sd0: 32-bit data port
> sd0: drive supports PIO mode 3
> pciide0: primary channel interrupting at irq 14
> sd0(pciide0:0:1): using PIO mode 3
> pciide0: secondary channel configured to compatibility mode
> atapibus1 at pciide0 channel 1: 2 targets
> cd0 at atapibus1 drive 0: <DVD-ROM DDU1621, MT1329  Firmware, VER
> S1.> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> (Ultra/33)
> cd1 at atapibus1 drive 1: <LITE-ON LTR-32123S, , XS0X> cdrom
> removable
> cd1: 32-bit data port
> cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> (Ultra/33)
> pciide0: secondary channel interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
> (using DMA data transfers)
> cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
> (using DMA data transfers)
> auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 Audio (rev 0x50)
> auvia0: interrupting at irq 11
> auvia0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
> auvia0: variable rate audio, double rate output, S/PDIF, center DAC,
> surround DAC, LFE DAC
> audio0 at auvia0: full duplex, mmap, independent
> vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
> vr0: interrupting at irq 10
> vr0: Ethernet address: 00:50:8d:fd:34:a0
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT374 IDE
> Controller
> pciide1: bus-master DMA support present
> pciide1: primary channel wired to native-PCI mode
> pciide1: using irq 11 for native-PCI interrupt
> pciide1: secondary channel wired to native-PCI mode
> pciide2 at pci0 dev 19 function 1: Triones/Highpoint HPT374 IDE
> Controller
> pciide2: bus-master DMA support present
> pciide2: primary channel wired to native-PCI mode
> pciide2: using irq 11 for native-PCI interrupt
> wd0 at pciide2 channel 0 drive 0: <FUJITSU MPF3153AT>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 14659 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30023280
> sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> (Ultra/66)
> wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66)
> (using DMA data transfers)
> pciide2: secondary channel wired to native-PCI mode
> wd1 at pciide2 channel 1 drive 0: <ST340016A>
> wd1: drive supports 16-sector PIO transfers, LBA addressing
> wd1: 38166 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360
> sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> (Ultra/100)
> wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100)
> (using DMA data transfers)
> isa0 at pcib0
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> apm0 at mainbus0: Power Management spec V1.2
> Kernelized RAIDframe activated
> scsibus0: waiting 2 seconds for devices to settle...
> uhidev0 at uhub2 port 2 configuration 1 interface 0
> uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2,
> iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> sd1 at scsibus0 target 2 lun 0: <QUANTUM, ATLAS10K3_18_WLS, 020W>
> disk fixed
> sd1: 17537 MB, 31022 cyl, 2 head, 578 sec, 512 bytes/sect x 35916548
> sectors
> sd1: sync (25.0ns offset 127), 16-bit (80.000MB/s) transfers, tagged
> queueing
> pciide0:0:1: pio setting rejected, falling back to PIO mode 0
> sd0(pciide0:0:1): using PIO mode 0
> sd0: no disk label
> sd0: no disk label
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> 
> 
> 
> 
> 
> 
> ---------------------------------------------
> Powered By "NetBSD" http://www.netbsd.org/
>  

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca