Hello, Juan.

You wrote at 18.02.2003, :

JR> El Tue, 18 Feb 2003 14:55:05 +0300
JR> CEBKA <CEBKA@smtp.ru> escribió:

>> Hello, all.
>> 
>>    I  have a problem configuring virtual consoles. NetBSD on boot says
>> that  devices  are  not  configured(WSCONS  message). How can I set up
>> devices,  if they are in /dev/ttyExx(I used MAKEDEV). Not long ago all
>> works OK.

JR> You must configure the virtual consoles on /etc/ttys and /etc/wscons.conf.
JR> Example:

JR> ------- /etc/wscons.conf -------

JR> screen  1       -       vt100
JR> screen  2       -       vt100
JR> screen  3       -       vt100
JR> screen  4       -       vt100
Ya

JR> ------- /etc/ttys ---------

JR> ttyE0   "/usr/libexec/getty Pc"         vt220   on secure
JR> ttyE1   "/usr/libexec/getty Pc"         vt220   on secure
JR> ttyE2   "/usr/libexec/getty Pc"         vt220   on secure
JR> ttyE3   "/usr/libexec/getty Pc"         vt220   on secure

JR> ---------------------------
Yes

JR> You must change the option `off` to `on'  on the terminals, which
JR> you want enable.
I know this...

JR> Regards,

This  is  ok.  But error is when booting NetBSD. It says, that devices
are unconfigured.

-- 
Best regards,
 CEBKA                          mailto:CEBKA@smtp.ru