El Mon, 27 Jan 2003 11:46:38 +0100
Juan RP <juan@xtraeme.dyndns.org> escribi=F3:

>=20
> Hello, i'm doing a setup to configure my ipv6, this is the out for ifconf=
ig
> interfaces ( freenet6 ):=20
>=20
> gif0: flags=3D8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
>         tunnel inet 80.32.6.91 --> 206.123.31.114
>         inet6 3ffe:b80:3:3905::2 -> 3ffe:b80:3:3905::1 prefixlen 128
>         inet6 fe80::204:76ff:fed4:87f7%gif0 ->  prefixlen 64 scopeid 0x5
>=20
> ex0:
> flags=3D8b63<UP,BROADCAST,NOTRAILERS,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MUL=
TICAST>
> mtu 1500        capabilities=3D7<IP4CSUM,TCP4CSUM,UDP4CSUM>
>         enabled=3D0
>         address: 00:04:76:d4:87:f7
>         media: Ethernet 10baseT
>         status: active
>         inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
>         inet6 fe80::204:76ff:fed4:87f7%ex0 prefixlen 64 scopeid 0x1
>         inet6 3ffe:b80:1a1f:1::1 prefixlen 64
>=20
> And the default route for inet6:
>=20
> Internet6:
> Destination                        Gateway                        Flags  =
 =20
> Refs
>     Use    Mtu  Interface default                          =20
>     3ffe:b80:3:3905::1=20
>            UGS         0        0      -  gif0
>=20

Mmm, i can ping in ipv6 to my lan, but i can't to out.

PING6(56=3D40+8+8 bytes) 3ffe:b80:1a1f:1::1 --> 3ffe:b80:1a1f:1::1
16 bytes from 3ffe:b80:1a1f:1::1, icmp_seq=3D0 hlim=3D64 time=3D0.128 ms
^C
--- 3ffe:b80:1a1f:1::1 ping6 statistics ---
1 packets transmitted, 1 packets received, 0% packet loss

PING6(56=3D40+8+8 bytes) 3ffe:b80:3:3905::2 --> 3ffe:b80:3:3905::2
16 bytes from 3ffe:b80:3:3905::2, icmp_seq=3D0 hlim=3D64 time=3D0.135 ms
^C
--- 3ffe:b80:3:3905::2 ping6 statistics ---
1 packets transmitted, 1 packets received, 0% packet loss

Thank you.
--=20
Juan RP ( Barcelona, Spain )
--=20