Hi,

I've recently installed NetBSD 1.6 i386 on a IBM Thinkpad
R32.
Although the mouse works fine under X, the moused fails to
start.

| # unname -a
| NetBSD mobile 1.6 NetBSD 1.6 (MOBILE) #8: Tue Jan 21 00:31:49 CET 2003
| timo@mobile:/usr/src/sys/arch/i386/compile/MOBILE i386

| # grep wsmouse /etc/X11/XF86Config
|       Option      "Protocol" "wsmouse"
|       Option      "Device" "/dev/wsmouse0"

| # moused -f -p /dev/wsmouse0 -t auto
| moused: unable to get status of mouse fd: Inappropriate ioctl for device
| moused: cannot determine mouse type on /dev/wsmouse0

| # moued -i all -p /dev/wsmouse0
| moused: unable to get status of mouse fd: Inappropriate ioctl for device
| moused: cannot determine mouse type on /dev/wsmouse0

| # grep wsmouse /usr/src/sys/arch/i386/conf/MOBILE
| pms*            at pckbc?       # PS/2 mouse for wsmouse
| wsmouse*        at pms? mux 0

| # dmesg
| NetBSD 1.6 (MOBILE) #8: Tue Jan 21 00:31:49 CET 2003
|     timo@mobile:/usr/src/sys/arch/i386/compile/MOBILE
| cpu0: Intel Pentium 4 (686-class), 1699.91 MHz
| cpu0: D-cache 8 KB 64b/line 4-way
| cpu0: L2 cache 512 KB 64b/line 8-way
| cpu0: features 3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
| cpu0: features 3febf9ff<PGE,MCA,CMOV,FGPAT,PSE36,CFLUSH,DS,ACPI,MMX>
| cpu0: features 3febf9ff<FXSR,SSE,SSE2,SS,HTT,TM>
| total memory = 254 MB
| avail memory = 234 MB
| using 3289 buffers containing 13156 KB of memory
| BIOS32 rev. 0 found at 0xfd800
| mainbus0 (root)
| pci0 at mainbus0 bus 0: configuration mode 1
| pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
| pchb0 at pci0 dev 0 function 0
| pchb0: Intel 82845 Host (rev. 0x04)
| agp at pchb0 not configured
| ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
| pci1 at ppb0 bus 1
| pci1: i/o space, memory space enabled
| vga0 at pci1 dev 0 function 0: ATI Technologies product 0x4c59 (rev. 0x00)
| wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
| wsmux1: connecting to wsdisplay0
| uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
| uhci0: interrupting at irq 11
| usb0 at uhci0: USB revision 1.0
| uhub0 at usb0
| uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
| uhub0: 2 ports with 2 removable, self powered
| uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
| uhci1: interrupting at irq 11
| usb1 at uhci1: USB revision 1.0
| uhub1 at usb1
| uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
| uhub1: 2 ports with 2 removable, self powered
| uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
| uhci2: interrupting at irq 11
| usb2 at uhci2: USB revision 1.0
| uhub2 at usb2
| uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
| uhub2: 2 ports with 2 removable, self powered
| ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
| pci2 at ppb1 bus 2
| pci2: i/o space, memory space enabled
| fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
| fxp0: interrupting at irq 11
| fxp0: Ethernet address 00:00:e2:8b:29:0b
| ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface
| ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0
| ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
| cbb0 at pci2 dev 9 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
| cbb0: interrupting at irq 5
| cardslot0 at cbb0 slot 0 flags 0
| cardbus0 at cardslot0: bus 3 device 0
| pcmcia0 at cardslot0
| pcib0 at pci0 dev 31 function 0
| pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
| pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
| pciide0: bus-master DMA support present
| pciide0: primary channel wired to compatibility mode
| wd0 at pciide0 channel 0 drive 0: <IC25N020ATCS04-0>
| wd0: drive supports 16-sector PIO transfers, LBA addressing
| wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
| wd0: 32-bit data port
| wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
| pciide0: primary channel interrupting at irq 14
| wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
| pciide0: secondary channel wired to compatibility mode
| atapibus0 at pciide0 channel 1: 2 targets
| cd0 at atapibus0 drive 0: <DW-28E, , 2.1A> type 5 cdrom removable
| cd0: 32-bit data port
| cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
| pciide0: secondary channel interrupting at irq 15
| cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
| Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
| auich0 at pci0 dev 31 function 5: i82801CA AC-97 Audio
| auich0: interrupting at irq 5
| auich0: ADS72 codec; headphone, Analog Devices Phat Stereo
| audio0 at auich0: full duplex, mmap, independent
| Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
| isa0 at pcib0
| pckbc0 at isa0 port 0x60-0x64
| pckbd0 at pckbc0 (kbd slot)
| pckbc0: using irq 1 for kbd slot
| wskbd0 at pckbd0: console keyboard, using wsdisplay0
| pms0 at pckbc0 (aux slot)
| pckbc0: using irq 12 for aux slot
| wsmouse0 at pms0 mux 0
| pcppi0 at isa0 port 0x61
| midi0 at pcppi0: PC speaker
| sysbeep0 at pcppi0
| isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
| npx0 at isa0 port 0xf0-0xff: using exception 16
| isapnp0: no ISA Plug 'n Play devices found
| apm0 at mainbus0: Power Management spec V1.2
| biomask effd netmask effd ttymask ffff
| boot device: wd0
| root on wd0a dumps on wd0b
| root file system type: ffs
| wsdisplay0: screen 1 added (80x25, vt100 emulation)
| wsdisplay0: screen 2 added (80x25, vt100 emulation)
| wsdisplay0: screen 3 added (80x25, vt100 emulation)
| wsdisplay0: screen 4 added (80x25, vt100 emulation)
| wsdisplay0: screen 5 added (80x25, vt100 emulation)
| wsdisplay0: screen 6 added (80x25, vt100 emulation)
| wsdisplay0: screen 7 added (80x25, vt100 emulation)
 

Any suggestions or help to fix this problem?

Thank you.

  -Timo