Hi again,

have not upgraded to latest XFree (XFree-CVS), since i have not experienced
any stability issues. It's been running OK for 2 days now and i don't see/have
any probs.

Same as u i cant get back to console once i quit X, screen is black, but
for me this is not a problem, running X all the time (between the
casual reboots). 

Would not have a clue about the apm-suspend, when i enable APM
support laptop hangs on boot so ill probably try ACPI.

XFree is CVS version of xsrc-CURRENT 3 days old.

Regards
Milos

On Fri, 17 Jan 2003 15:29:43 +1300
Milos Negovanovic <milosn@xtra.co.nz> wrote:

> Hi,
> 
> thanks heaps for this tip, after adding "NoUseBIOS"  X  appeared : ).
> 
> Have not experienced the stuff u were talking about (yet, only have it
> running for 5 min), but in case i do and if I install the latest XFree
> ill post the results on here.
> 
> Regards
> Milos
> 
> On Fri, 17 Jan 2003 01:45:36 +0100
> Lubomir Sedlacik <salo@Xtrmntr.org> wrote:
> 
> > hi,
> > 
> > On Thu, Jan 16, 2003 at 03:25:10PM -0800, Harry Waddell wrote:
> > > On Fri, 17 Jan 2003 10:52:41 +1300 Milos Negovanovic wrote:
> > > > 
> > > > Ive been trying to run X on my laptop good 3-4 days now (have tried
> > > > CURRENT, 1.6-RELEASE and 1.6 in that order). Whenever i try to run
> > > > 'x86cfg', or to 'startx' with configuration file that already worked
> > > > with X-4.2.1 under Linux, i get this:
> > > > 
> > > > ******************ERROR LOG********************************
> > > > 
> > > > (II) Silicon Motion(0): initializing int10
> > > > (WW) Silicon Motion(0): remove MTRR a0000 - c0000
> > > > (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
> > > > (II) Silicon Motion(0): VESA BIOS function failed
> > > > 
> > > > Fatal server error:
> > 
> > > Caught signal 11.  Server aborting
> > > > 
> > > > ********************ERROR LOG*************************************
> > > > 
> > > > Laptop is IBM Thinkpad i1300 with SiliconMotion LynxEm+ 4MB VRAM
> > > > graphics chip.
> > > > 
> > > > Any suggestions are welcome.
> > > 
> > > suggestion 1, try using the vesa driver. If it works, you'll have a viable
> > > workaround. If it doesn't work, it indicates that the problem may not
> > > be related to the video adapter driver, but may instead be in the input
> > > drivers, etc...
> > 
> > the fix is not to use VESA BIOS, that means add:
> > 
> >  Option      "NoUseBIOS"
> > 
> > to Device section.
> > 
> > > suggestion 3,  obtain the latest source from the xfree86.org via cvs and
> > > compile it yourself. See if it still crashes. 
> > 
> > i've not yet tried this due to lack of time and interest but i had
> > several other problems with the siliconmotion driver (i have LynxEM card
> > on Asus L7300 laptop):
> > 
> >  - i am unable to switch back to text console when running X.  there is
> >    black screen only.  the same after exiting X.
> > 
> >  - it hangs on apm suspend, need warm reset
> > 
> >  - it occasionally hangs at random times
> > 
> > XFree86 3.3.6 works fine for me, without accelerated mode, though.
> > please let me know if you'd have any success with latest XFree sources,
> > i need to use this laptop, not experiment and rebuild all X packages and
> > possibly XFree86 3.3.6 again..  good luck!
> > 
> > 
> > regards,
> > 
> > -- 
> > -- Lubomir Sedlacik <salo@Xtrmntr.org>                   --
> > --                  <salo@silcnet.org>                   --
> >