Having trouble getting my wireless pcmcia card working.  I think I may
have messed up irq's or something because I compiled it into the kernel.
I am not sure what to do next.  Any help would be appreciated...
Including dmesg output
Fred
NetBSD 1.5.3 (DR-EVIL) #0: Wed Aug  7 18:16:31 EDT 2002
    root@:/usr/src/sys/arch/i386/compile/DR-EVIL
cpu0: Intel Pentium (P54C) (586-class), 150.35 MHz
total memory = 32384 KB
avail memory = 27316 KB
using 430 buffers containing 1720 KB of memory
BIOS32 rev. 0 found at 0xffe90
PCI BIOS rev. 2.1 found at 0xfb83e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xfb580, size 64 bytes (2 entries)
PCI Interrupt Router at 000:06:0
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1066 product 0x8002
Warning: unable to fix up PCI interrupt routing
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bus #2 is the last bus
mainbus0 (root)
pnpbios0 at mainbus0: code f0000, data 40, entry e2f4, control 1 eventp 4b4
pnpbios0: nodes 15, max len 436
pnpbios0: event flag vaddr 0xc38a84b4
pnpbios0: not docked
PNP0A03 (io cf8-cff) at pnpbios0 index 0 ignored
PNP0C01 (mem 0-9ffff 100000-1ffffff f0000-fffff fffe0000-ffffffff, io 180) at pnpbios0 index 1 ignored
PNP0000 (io 20-3f a0-bf, irq 2) at pnpbios0 index 2 ignored
PNP0100 (io 40-5f, irq 0) at pnpbios0 index 3 ignored
PNP0200 (io 80-9f 0-1f c0-df, dma 4) at pnpbios0 index 4 ignored
pckbc0 at pnpbios0 index 5 (PNP0303): kbd port
pckbc1 at pnpbios0 index 6 (PNP0F13): aux port
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
PNP0800 (io 61) at pnpbios0 index 7 ignored
PNP0B00 (io 70-7f, irq 8) at pnpbios0 index 8 ignored
npx0 at pnpbios0 index 9 (PNP0C04)
npx0: io f0-ff, irq 13
npx0: using exception 16
PNP0E03, PNP0E00 (io 3e0-3e1, irq 9) at pnpbios0 index 10 ignored
ESS0106 (io 220-22f 388-38b 330-331, irq 5, dma 0 3) at pnpbios0 index 11 ignored
PNP0501 at pnpbios0 index 12 disabled
PNP0401 (io 378-37f 778-77b, irq 7) at pnpbios0 index 14 ignored
fdc0 at pnpbios0 index 15 (PNP0700)
fdc0: unable to map CTL I/O space
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Picopower Technology product 0x0001 (rev. 0x04)
pcib0 at pci0 dev 6 function 0
pcib0: Picopower Technology product 0x8002 (rev. 0x00)
vga0 at pci0 dev 7 function 0: Neomagic product 0x0002 (rev. 0x01)
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
pciide0 at pci0 dev 8 function 0: CMD Technology PCI0643 (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DTCA-23240>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3102 MB, 6304 cyl, 16 head, 63 sec, 512 bytes/sect x 6354432 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-ROM  CDR-N16D, , 1.40> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 3, DMA mode 1 (using DMA data transfers)
cbb0 at pci0 dev 9 function 0: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 9 function 1: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb1: NOT USED because of unconfigured interrupt
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
apm: 1 batteries, global standby, global suspend, rtimer suspend, internal standby, internal suspend, pccard standby, pccard suspend
biomask effd netmask effd ttymask ffff
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..4..7..9..10..11
pcic0: using irq 3 for socket events
IPsec: Initialized Security Association Processing.
pnpbios: os active returns 0x00
pnpbios0: vendor defined event 0xfeff
The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300P, RevA (manufacturer 0x0274, product 0x1613) function 0 not configured
sm0 at pcmcia1 function 0 port 0x400-0x40f: Megahertz X-JACK Ethernet
sm0: SMC91C94, revision 1, buffer size: 4608
sm0: MAC address 00:00:86:13:bc:a3, default media UTP
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0