Here is the output:

XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 30 2000
=09If the server is older than 6-12 months, or if your card is newer
=09than the above date, look for a newer version before reporting
=09problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.5.2 [ELF] The NetBSD Foundation, Inc.
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
Using wscons driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(fr)" (overrides other XKB settings)
(**) Mouse: type: wsmouse, device: /dev/wsmouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "ATI Rage 128"
(**) S3: Monitor ID: "Philips 105S"
(--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to=20
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R=
6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled=
,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X1=
1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"

 *** None of the configured devices were detected.***


Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).