Have problems with a setup-kernel.

I think the PCMCIA BRIDGE is the reason why i'd get
problems.
I have been looking but unable to know how to set the
flags right in
the kernel, maybe i have the fault device enabled?
Have no idea about what hardware i got, but this is
the default driver
in GENERIC, don't think so much that it is fault
driver.
'function 0' doh..
?????????????
Maybe NOT just as simple as i think, maybe just need
to add a new options or device in the kernel.., please
help me.


NetBSD 1.5.2 (LAST) #0: Wed Nov  7 04:47:21 PST 2001
    root@Best:/usr/src/sys/arch/i386/compile/LAST
cpu0: Intel Pentium/MMX (586-class), 199.32 MHz
total memory = 32384 KB
avail memory = 27860 KB
using 430 buffers containing 1720 KB of memory
BIOS32 rev. 0 found at 0xee600
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1039 product 0x0406 (rev. 0x00)
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x1039 product 0x0008 (rev. 0x01)
pciide0 at pci0 dev 1 function 1: vendor 0x1039
product 0x0601 (rev. 0x01)
pciide0: hardware does not support DMA
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK2104MAV>
wd0: drive supports 16-sector pio transfers, lba
addressing
wd0: 2067 MB, 4200 cyl, 16 head, 63 sec, 512
bytes/sect x 4233600 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 2
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-220E, , 1.0C> type 5
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
vga0 at pci0 dev 6 function 0: vendor 0x1023 product
0x9660 (rev. 0xd3)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
vendor 0x119b product 0x1221 (PCMCIA bridge, revision
0x02) at pci0 dev 13 function 0 not configured
vendor 0x119b product 0x1221 (PCMCIA bridge, revision
0x02) at pci0 dev 14 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working
fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working
fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device
support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has
sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has
sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.1
biomask ef45 netmask ef45 ttymask ffc7
pcic0: controller 0 detecting irqs with mask
0xdeb8:..9..10..11
pcic0: controller 1 detecting irqs with mask 0xdeb8:
pcic0: no available irq; polling for socket events
boot device: wd0
Root on wd0a dumps on wd0b
root file system type: ffs

-------------------------INSERT PCMCIA
CARD------------------
pcmcia1: CIS version unknown (major=1, minor=0)
pcmcia1: CIS info: iPort, 10/100 Ethernet Card, , 
pcmcia1: Manufacturer code 0x274, product 0x1103
pcmcia1: function 0: network adapter, ccr addr 3c0
mask 63
pcmcia1: function 0, config table entry 7: I/O card;
irq mask ffff; iomask a, iospace 300-31f;
mwait_required io16 irqlevel
iPort, 10/100 Ethernet Card, ,  (manufacturer 0x0274,
product 0x1103) function 0 not configured
----------------------- END ------------------



__________________________________________________
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
http://geocities.yahoo.com/ps/info1