On Sat, Mar 10, 2001 at 12:22:25PM +0100, David Bauer wrote:
> Hi,
> 
> I can't get running a Trust pcmcia modem FM560LKI on NetBSD1.5.
> 
> Inserting card gives following messages:
> 
> pcmcia1: CIS version PC Card Standard 5.0
> pcmcia1: CIS info: PCMCIA  , 56K V.90 Fax Modem (LKI) , FM560LKI  
> pcmcia1: Manufacturer code 0x175, product 0x0
> pcmcia1: function 0: serial port, ccr addr ff80 mask 67
> pcmcia1: function 0, config table entry 15: I/O card; irq mask 86bc;
> iomask a, iospace 3f8-3ff; rdybsy_active io8 irqshare irqpulse irqlevel
> powerdown audio
> pcmcia1: function 0, config table entry 23: I/O card; irq mask 86bc;
> iomask a, iospace 2f8-2ff; rdybsy_active io8 irqshare irqpulse irqlevel
> powerdown audio
> pcmcia1: function 0, config table entry 31: I/O card; irq mask 86bc;
> iomask a, iospace 3e8-3ef; rdybsy_active io8 irqshare irqpulse irqlevel
> powerdown audio
> pcmcia1: function 0, config table entry 39: I/O card; irq mask 86bc;
> iomask a, iospace 2e8-2ef; rdybsy_active io8 irqshare irqpulse irqlevel
> powerdown audio
> com0 at pcmcia1 function 0: serial device
> com0: ns16550a, working fifo
> 
> So it seems to be OK.
> But if I try to tip or cu to the modem then:
> com0: com_iflush timeout 0d
> com0: com_iflush timeout 0d
> com0: com_iflush timeout 0d
> com0: com_iflush timeout 0d
> 
> tip then says "connected" but it's hanging completely. There is no
> reaction to Ctrl-D etc. 
> 
> The modem runs fine under FreeBSD so what could be the problem here ?

Maybe compare IRQ adn iospace to what's used under FreeBSD ?

--
Manuel Bouyer <bouyer@antioche.eu.org>
--