--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

> Ben, exactly which version of 1.5 are you running.  What's the hardware?

I am attaching the dmesg from my machine.  I am using stock 1.5, and I am
surprised because I've built Perl in 1.5 on at least 6 machines.  This is
the first one to burp.  I built Perl in 1.5_ALPHA2 on a machine with only
32 megs of RAM (I had to stop some services to have enough memory).

I'll take out some of my memory sticks *grunt* and see if I can narrow it
down to a particular piece of hardware.

Ben
-- 
Code softly and carry a big debugger.

--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

NetBSD 1.5 (STARLING) #0: Sun Jan  7 11:35:20 PST 2001
    root@starling:/usr/src/sys/arch/i386/compile/STARLING
cpu0: Intel Pentium (P54C) (586-class)
total memory = 111 MB
avail memory = 101 MB
using 1454 buffers containing 5816 KB of memory
BIOS32 rev. 0 found at 0xfb490
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-352030>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 19470 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39876480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd1 at pciide0 channel 0 drive 1: <SAMSUNG WN321620A (2.16 GB)>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 2060 MB, 4186 cyl, 16 head, 63 sec, 512 bytes/sect x 4219488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <MATSHITA CR-583, , 1.05> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
wd2 at pciide0 channel 1 drive 1: <WDC AC2850F>
wd2: drive supports 16-sector pio transfers, lba addressing
wd2: 814 MB, 1654 cyl, 16 head, 63 sec, 512 bytes/sect x 1667232 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
wd2(pciide0:1:1): using PIO mode 0, DMA mode 1 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 9 function 0: Nvidia Corporation & SGS Thomson Microelectric Riva 128 (rev. 0x10)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ep0 at pci0 dev 10 function 0: 3Com 3c595-TX 10/100 Ethernet
ep0: interrupting at irq 9
ep0: address 00:a0:24:bb:30:6f, 64KB word-wide FIFO, 3:1 Rx:Tx split
ep0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX (default 10baseT)
ahc0 at pci0 dev 11 function 0
ahc0: interrupting at irq 12
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus0 at ahc0 channel 0: 8 targets, 8 luns per target
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
sb0 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb0: Creative SB16 PnP Audio: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
mpu0 at sb0
midi0 at mpu0: SB MPU-401 MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
wdc2 at isapnp0 port 0x168/8,0x36e/2 irq 10
wdc2: Creative SB16 PnP IDE
isapnp0: <Creative SB16 PnP, PNPFFFF, , Reserved> port 0x100/1 not configured
joy0 at isapnp0 port 0x200/8
joy0: Creative SB16 PnP Game
joy0: joystick not connected
biomask fd45 netmask ff45 ttymask ffc7
scsibus0: waiting 2 seconds for devices to settle...
wd2: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0

--ReaqsoxgOBHFXBhH--