--19749577.964980513938.JavaMail.root@www-a22
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi,
  Since I last posted, I've managed to get NetBSD installed on my OS, but now I've got a problem I'm trying to figure out.
  Whenever I try to use my modem (i.e. cu -l), I get the message "tty00: Device not configured or installed" and when I boot NetBSD, it is detected, but IRQ 4 isn't configured. How can I fix this? It is not a hardware problem since I'm using the modem in Linux just fine, but according to the i386 FAQ, the error message could mean there is no NetBSD support for my modem just yet. If this is the case, then is it abnormal for my modem to be detected at boottime?
  Below is a copy of dmesg and all sysinfo.

TIA,
Paul

SysInfo:
  NetBSD 1.4.2 i386 installed on a 486 system, 16 meg core, 725 (?) mb memory and modem=Creative Modem Blaster

NetBSD 1.4.2 (GENERIC) #3: Wed Mar 15 23:41:54 PST 2000
    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 4 model 3 step 5
cpu0: Intel 486DX2 (486-class)
real mem  = 24772608
avail mem = 19345408
using 328 buffers containing 1343488 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
Intel 82426EX PCI-to-ISA Bridge (PCIB) (miscellaneous prehistoric, revision 0x02) at pci0 dev 5 function 0 not configured
vga1 at pci0 dev 10 function 0: Cirrus Logic CL-GD5434-8 (rev. 0x26)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at mainbus0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <WDC AC2700H>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 696MB, 1416 cyl, 16 head, 63 sec, 512 bytes/sect x 1427328 sectors
wd0: drive supports PIO mode 3, DMA mode 1
wdc1 at isa0 port 0x170-0x177 irq 15
lpt2 at isa0 port 0x3bc-0x3bf: polled
sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex
opl0 at sb0: model OPL3
midi0 at opl0: <SB Yamaha OPL3>
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: <Creative Modem Blaster DI5601, CTL3001, , > port 0x3f8/8 irq 4 not configured
biomask c040 netmask c040 ttymask d042
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

Be whoever you want to be with another.com
Just click here: http://another.com/jump.jsp?destDesc=another.com/login.jsp?sig=390


--19749577.964980513938.JavaMail.root@www-a22--