Hello

Is anyone able to help me get my Grey Cell PCMCIA ethernet card working on
my laptop please ?

I think the Grey Cell is a rebadged TDK card, but I maybe wrong. The laptop
I have installed NetBSD 1.4.2 on is a Sony Vaio PCG-C1F if that helps at
all.

The output from dmesg, and the messages that appear when the card is
inserted into the PC card slot are included below.

Thanks for any help

Simon


NetBSD 1.4.2 (VAIO-SR) #2: Thu May 18 14:29:38 PDT 2000
root@:/usr/src/sys/arch/i386/compile/VAIO-SR
cpu0: family 5 model 8 step 2
cpu0: Intel Pentium (586-class)
real mem = 133758976
avail mem = 122208256
using 1658 buffers containing 6791168 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHF2043AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4126MB, 8944 cyl, 15 head, 63 sec, 512 bytes/sect x 8452080 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4)
(rev. 0x01)
uhci0: interrupting at irq 9
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 8 function 0: Neomagic product 0x0005 (rev. 0x20)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Sony product 0x8009 (Firewire serial bus, revision 0x01) at pci0 dev 9
function 0 not configured
Ricoh 5C475 PCI-CardBus bridge (CardBus bridge) at pci0 dev 10 function 0
not configured
isa0 at pcib0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0: half duplex
opl0 at sb0: model OPL3
midi at opl0 not configured
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.1
apm0: battery life expectancy: 100%
apm0: A/C state: on
apm0: battery charge state: high charging
apm0: estimated 3h 0m
biomask 4200 netmask 4200 ttymask 520a
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: Grey Cell, GCS2000, Gold II, 1
pcmcia0: Manufacturer code 0x143, product 0x201
pcmcia0: function 0: network adapter, ccr addr 3f8 mask 1
pcmcia0: function 0, config table entry 32: I/O card; irq mask 9e38; iomask
a, iospace 300-31f; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia0: function 0, config table entry 33: I/O card; irq mask 9e38; iomask
a, iospace 320-33f; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia0: function 0, config table entry 34: I/O card; irq mask 9e38; iomask
a, iospace 340-35f; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia0: function 0, config table entry 35: I/O card; irq mask 9e38; iomask
a, iospace 360-37f; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
Grey Cell, GCS2000, Gold II, 1 (manufacturer 0x143, product 0x201) function
0 not configured


--
Simon Rowe
email:  sj.rowe@btinternet.com