My sound card is not configured on boot, but I believe it is listed as
being supported by NetBSD (maybe it's a newer version card?)  I'm running
1.4 and it is installed in a Pavilion, and what you can't see by the
following information is that my BIOS is set to Other, and IRQ 10
is reserved for ISA devices.  Also, my compile really is more or less
GENERIC, I checked and the Ensoniq reference isn't commented out, so it
isn't that.


Here is my dmesg, any help would be appreciated.

------------------------------------------------------------------------------

NetBSD 1.4 (TED) #4: Tue Jun 22 21:20:10 EDT 1999
    root@here.net:/usr/src/sys/arch/i386/compile/TED
cpu0: family 5 model 8 step c
cpu0: AMD K6-2 (586-class)
real mem  = 30998528
avail mem = 25223168
using 404 buffers containing 1654784 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System product 0x0530 (rev. 0x02)
pciide0 at pci0 dev 0 function 1: Silicon Integrated System 5597/5598 IDE controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CR4.3A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4110MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA mode 3, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/10/21, 1.05> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pcib0 at pci0 dev 1 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0xb1)
Silicon Integrated System product 0x0009 (undefined subclass 0x00) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x11)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0
uhub0 at usb0
uhub0: Silicon Integrat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
Silicon Integrated System product 0x6306 (VGA display, revision 0xa2) at pci1 dev 0 function 0 not configured
vga1 at pci0 dev 10 function 0: Nvidia Corporation product 0x0020 (rev. 0x04)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
Ensoniq AudioPCI 97 (audio multimedia, revision 0x02) at pci0 dev 11 function 0 not configured
de0 at pci0 dev 12 function 0
de0: interrupting at irq 11
de0: Asante 21041 [10Mb/s] pass 2.1
de0: address xx:xx:xx:xx:xx
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
we1 at isa0 port 0x300-0x31f iomem 0xcc000-0xcffff irq 10
we1: SMC8216/SMC8216C Ethernet (16-bit)
we1: Ethernet address xx:xx:xx:xx:xx
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask c840 netmask cc40 ttymask dcc2
de0: enabling 10baseT port
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

----- End forwarded message -----