I am running NetBSD 1.1 on a machine with a Canon BJ200 printer attached.
I have been able to print text on the printer, but it will not print raw
output from ghostscript.  This is a major holdup on the usability of my
machine.  Does anyone have a similar setup that is working?

BTW, this is my /etc/printcap file:


#	@(#)printcap	5.3 (Berkeley) 6/30/90

#lp|bj200|local-printer|My printer:\
#	:lp=/dev/lpa0:\ 
#        :sd=/var/spool/lpa0:\
#        :lf=/var/log/lpd-errs:\

# Entry for raw device cdj550.raw
bj200.raw|Raw output device bj200:\
        :lp=/dev/lpa0p:\
        :sd=/var/spool/lpd/bj200/raw:\
        :mx#0:sf:sh:rs:

bj200|Ghostscript device bj200:\
    :lp=/dev/null:\
    :sd=/var/spool/lpd/bj200/:\
    :lf=/var/spool/lpd/bj200/logfile:\
    :af=/var/spool/lpd/bj200/acct:\
    :if=/usr/local/lpr/bj200.filter:\
    :mx#0:sf:sh:rs:



-----------------------------------------------------------------------
|Eric Wenger                    |  Student, Iowa State University     |
|Friley 3300 Kimball            |                                     |
|Ames, IA  50012-0001           |  Programmer, Ames Laboratories      |
|                               |                                     |


-----------------------------------------------------------------------
|Eric Wenger                    |  Student, Iowa State University     |
|Friley 3300 Kimball            |                                     |
|Ames, IA  50012-0001           |  Programmer, Ames Laboratories      |
|                               |                                     |
|ewenger@iastate.edu            |                                     |
-----------------------------------------------------------------------