Subject: Re: Typo in the RaidFrame guide.
To: Rui Paulo <firstname.lastname@example.org>
From: Marcin Jessa <email@example.com>
Date: 05/03/2006 20:16:27
On Tue, 02 May 2006 22:34:29 +0100
Rui Paulo <firstname.lastname@example.org> wrote:
> Marcin Jessa <email@example.com> writes:
> > Hi.
> > There is a typo on http://www.netbsd.org/guide/en/chap-rf.html#chap-rf-configuring-raid
> > Just under section 15.3.5. Initializing the RAID Device it says:
> > # vi /var/tmp/raid0.conf
> > START array
> > 1 2 0
> > START disks
> > /dev/wd9a
> > /dev/wd1a
> > Where wd9a should be replaced with wd0a.
> Fixed thanks.
One more thing. Maybe newfs -O 1 /dev/raid0a in the 15.3.6. Setting up Filesystems
should also mention -O 2 since UFS2 is suitable for drives with more
than 1 Terabyte capacity and it is already today possible to get 750G SATA drives.
The same will then go for installboot using
/usr/mdec/bootxx_ffsv2 instead of /usr/mdec/bootxx_ffsv1
included/adapted as well could IMHO be a good thing.