NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-hppa/61030: hppa: ATAPI CD-ROM on nside(4) not detected unless PDC accessed it first
>Number: 61030
>Category: port-hppa
>Synopsis: hppa: ATAPI CD-ROM on nside(4) not detected unless PDC accessed it first
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: port-hppa-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Nov 19 20:00:00 +0000 2026
>Originator: Brandon Applegate
>Release: NetBSD 11.99.11 (daily 20261116083232Z)
>Organization:
>Environment:
NetBSD c3700.retronet.burn.net 11.99.11 NetBSD 11.99.11 (GENERIC-AC97_TEST) #1: Thu Nov 19 13:07:56 EST 2026 root%c3700.retronet.burn.net@localhost:/usr/src/sys/arch/hppa/compile/GENERIC-AC97_TEST hppa
HP 9000/785 C3700, PA-8700
Onboard NS PC87415 IDE (nside0), on pci0
Drive: HITACHI DVD-ROM GD-3000, firmware 020S, master on the
first channel
>Description:
The IDE CD-ROM drive only attaches if PDC has accessed it
earlier in the same power-on session:
- booting from the CD (as during the install): cd0 attaches
- running "search" at the PDC prompt before booting: cd0
attaches
- otherwise, on both cold and warm boots: no cd0, and
hw.disknames lists only sd0
When it works:
cd0 at atapibus0 drive 0: <HITACHI DVD-ROM GD-3000, , 020S> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(nside0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
When it fails, nside0, atabus0 and atabus1 all attach, but no
device is found on either channel. Running "drvctl -r atabus0"
and "drvctl -r atabus1" after boot does not find the drive
either.
The installer's RAMDISK kernel is GENERIC plus memory-disk
options, so the same drivers are present in both cases. It
looks like the drive does not answer NetBSD's probe or reset
until PDC has initialized it ?
>How-To-Repeat:
Power-cycle a C3700 with an ATAPI CD-ROM on the onboard IDE
and boot NetBSD without stopping at PDC:
sysctl hw.disknames
Repeat with "search" at the PDC prompt before booting and
compare.
>Fix:
Workaround: run "search" at the PDC prompt before booting.
Home |
Main Index |
Thread Index |
Old Index