NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/56815 (Lenovo ThinkCentre with i915drmkms graphics fails to boot)



The following reply was made to PR port-amd64/56815; it has been noted by GNATS.

From: Jarle Greipsland <jarle.greipsland%norid.no@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-amd64/56815 (Lenovo ThinkCentre with i915drmkms graphics
 fails to boot)
Date: Sun, 19 Feb 2023 13:49:20 +0100 (CET)

 Jarle Greipsland <jarle.greipsland%norid.no@localhost> writes:
 >  > If it still fails the same way, can you try blind typing C-A-ESC to
 >  > enter ddb and then typing `sync' to get a crash dump?  On the next
 >  > boot, use `userconf disable i915drmkms' to disable the driver so you
 >  > can get savecore to run.
 >  I tried to do that, but there is no disk activity.  I waited a
 >  while, and then pressed the power button in order to reset the
 >  system.  There was no crash dump.
 I tried a recent -current kernel, and the problem still persists.
 A normal boot of a new kernel will hang hard some short time
 after it starts probing the graphics stuff.  And I cannot produce
 a crash dump.
 
 I did however try and boot the same -current kernel after issuing a
 'userconf disable 915drmkms*' command to the bootloader.  The
 kernel then boots, but I then cannot get the X server to work.
 In case it might be useful, I enclose a copy of the dmesg output.
 
 					-jarle
 
 [     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 [     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
 [     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
 [     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [     1.000000]     The Regents of the University of California.  All rights reserved.
 
 [     1.000000] NetBSD 10.99.2 (GENERIC) #8: Sun Feb 19 06:46:30 CET 2023
 [     1.000000] 	jarle%ask.home.greipsland.no@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC
 [     1.000000] total memory = 8104 MB
 [     1.000000] avail memory = 7814 MB
 [     1.000000] timecounter: Timecounters tick every 10.000 msec
 [     1.000000] Kernelized RAIDframe activated
 [     1.000000] [   380.000000] i915drmkms* disabled
 [     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 [     1.000004] mainbus0 (root)
 [     1.000004] ACPI: RSDP 0x00000000000F0580 000024 (v02 LENOVO)
 [     1.000004] ACPI: XSDT 0x00000000AB0C0090 0000A4 (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: FACP 0x00000000AB0D2460 00010C (v05 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-640)
 [     1.000004] ACPI: DSDT 0x00000000AB0C01C8 012295 (v02 LENOVO TC-M00   00001380 INTL 20120913)
 [     1.000004] ACPI: FACS 0x00000000AB66DE80 000040
 [     1.000004] ACPI: APIC 0x00000000AB0D2570 000084 (v03 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: FPDT 0x00000000AB0D25F8 000044 (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: FIDT 0x00000000AB0D2640 00009C (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: MCFG 0x00000000AB0D26E0 00003C (v01 LENOVO TC-M00   00001380 MSFT 00000097)
 [     1.000004] ACPI: TCPA 0x00000000AB0D2720 000032 (v02 LENOVO TC-M00   00001380 MSFT 01000013)
 [     1.000004] ACPI: SLIC 0x00000000AB0D2758 000176 (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: MSDM 0x00000000AB0D28D0 000055 (v03 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: SSDT 0x00000000AB0D2928 000763 (v01 LENOVO TC-M00   00001380 INTL 20061109)
 [     1.000004] ACPI: SSDT 0x00000000AB0D3090 000290 (v01 LENOVO TC-M00   00001380 INTL 20061109)
 [     1.000004] ACPI: SSDT 0x00000000AB0D3320 00017A (v01 LENOVO TC-M00   00001380 INTL 20061109)
 [     1.000004] ACPI: UEFI 0x00000000AB0D34A0 000042 (v01 LENOVO TC-M00   00001380      00000000)
 [     1.000004] ACPI: LPIT 0x00000000AB0D34E8 000104 (v01 LENOVO TC-M00   00001380 MSFT 0100000D)
 [     1.000004] ACPI: CSRT 0x00000000AB0D35F0 00014C (v00 LENOVO TC-M00   00001380 MSFT 0100000D)
 [     1.000004] ACPI: LUFT 0x00000000AB0D3740 0569E2 (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: BGRT 0x00000000AB12A128 000038 (v01 LENOVO TC-M00   00001380 AMI  00010013)
 [     1.000004] ACPI: 4 ACPI AML tables successfully acquired and loaded
 [     1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 115 pins
 [     1.000004] cpu0 at mainbus0 apid 0
 [     1.000004] cpu0: Use lfence to serialize rdtsc
 [     1.000004] cpu0: Intel(R) Pentium(R) CPU  J3710  @ 1.60GHz, id 0x406c4
 [     1.000004] cpu0: node 0, package 0, core 0, smt 0
 [     1.000004] cpu1 at mainbus0 apid 2
 [     1.000004] cpu1: Intel(R) Pentium(R) CPU  J3710  @ 1.60GHz, id 0x406c4
 [     1.000004] cpu1: node 0, package 0, core 1, smt 0
 [     1.000004] cpu2 at mainbus0 apid 4
 [     1.000004] cpu2: Intel(R) Pentium(R) CPU  J3710  @ 1.60GHz, id 0x406c4
 [     1.000004] cpu2: node 0, package 0, core 2, smt 0
 [     1.000004] cpu3 at mainbus0 apid 6
 [     1.000004] cpu3: Intel(R) Pentium(R) CPU  J3710  @ 1.60GHz, id 0x406c4
 [     1.000004] cpu3: node 0, package 0, core 3, smt 0
 [     1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
 [     1.000004] acpi0: X/RSDT: OemId <LENOVO,TC-M00  ,00001380>, AslId <AMI ,00010013>
 [     1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
 [     1.000004] ACPI: Dynamic OEM Table Load:
 [     1.000004] ACPI: SSDT 0xFFFFF63CAA7A2808 0006FA (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
 [     1.000004] ACPI: Dynamic OEM Table Load:
 [     1.000004] ACPI: SSDT 0xFFFFF63DE9A3D488 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
 [     1.000004] ACPI: Dynamic OEM Table Load:
 [     1.000004] ACPI: SSDT 0xFFFFF63DE882D748 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
 [     1.000004] ACPI: Dynamic OEM Table Load:
 [     1.000004] ACPI: SSDT 0xFFFFF63CAA785B08 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
 [     1.000004] acpi0: SCI interrupting at int 9
 [     1.000004] acpi0: fixed power button present
 [     1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 [     1.013774] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
 [     1.013774] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
 [     1.013774] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
 [     1.013774] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
 [     1.013774] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
 [     1.013774] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
 [     1.013774] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
 [     1.013774] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
 [     1.013774] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
 [     1.013774] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
 [     1.013774] acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
 [     1.013774] acpiout9 at acpivga0 (ISP0, 0x22b8): ACPI Display Output Device
 [     1.013774] acpivga0: connected output devices:
 [     1.013774] acpivga0:   0x0400 (acpiout8): Unknown Output Device, head 0
 [     1.013774] acpivga0:   0x22b8 (acpiout9): Unknown Output Device, head 0, non vga
 [     1.013774] FWHD (INT0800) at acpi0 not configured
 [     1.013774] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 [     1.013774] pckbc1 at acpi0 (PS2K, MSFT0001-0) (kbd port): io 0x60,0x64 irq 1
 [     1.013774] pckbc2 at acpi0 (PS2M, MSFT0003-0) (aux port): io 0x60,0x64 irq 12
 [     1.013774] BTH1 (BCM2E64) at acpi0 not configured
 [     1.013774] GPS1 (BCM4752) at acpi0 not configured
 [     1.013774] SHUB (SMO91D0) at acpi0 not configured
 [     1.013774] STRB (INTCF1C) at acpi0 not configured
 [     1.013774] TPD1 (MSFT0002) at acpi0 not configured
 [     1.013774] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 [     1.013774] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 [     1.013774] tpm0 at acpi0 (TPM, PNP0C31-1): mem 0xfed40000-0xfed44fff
 [     1.013774] tpm0: device 0x00fe1050 rev 0x2
 [     1.013774] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
 [     1.013774] acpitz0 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
 [     1.013774] acpitz0: active cooling level 0: 110.0C
 [     1.013774] acpitz0: levels: critical 95.0 C, hot 90.0 C, passive 85.0 C
 [     1.013774] acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
 [     1.013774] acpiwmibus at acpiwmi0 not configured
 [     1.013774] LBAI (LEN4001) at acpi0 not configured
 [     1.013774] ACPI: Enabled 6 GPEs in block 00 to 3F
 [     1.013774] pci0 at mainbus0 bus 0: configuration mode 1
 [     1.013774] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 [     1.013774] pchb0 at pci0 dev 0 function 0: Intel Braswell Soc Transaction Router (rev. 0x35)
 [     1.013774] vga0 at pci0 dev 2 function 0: Intel HD Graphics (rev. 0x35)
 [     1.013774] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 [     1.013774] wsmux1: connecting to wsdisplay0
 [     1.013774] drm at vga0 not configured
 [     1.013774] ahcisata0 at pci0 dev 19 function 0: Intel Braswell AHCI (rev. 0x35)
 [     1.013774] ahcisata0: 64-bit DMA
 [     1.013774] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xd734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SNCQ,S64A>
 [     1.013774] ahcisata0: interrupting at msi0 vec 0
 [     1.013774] atabus0 at ahcisata0 channel 0
 [     1.013774] atabus1 at ahcisata0 channel 1
 [     1.013774] xhci0 at pci0 dev 20 function 0: Intel Braswell xHCI (rev. 0x35)
 [     1.013774] xhci0: 64-bit DMA
 [     1.013774] xhci0: interrupting at msi1 vec 0
 [     1.013774] xhci0: xHCI version 1.0
 [     1.013774] usb0 at xhci0: USB revision 3.0
 [     1.013774] usb1 at xhci0: USB revision 2.0
 [     1.013774] Intel Braswell TXE (miscellaneous crypto, revision 0x35) at pci0 dev 26 function 0 not configured
 [     1.013774] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 [     1.013774] hdaudio0: interrupting at msi2 vec 0
 [     1.013774] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
 [     1.013774] hdafg0 at hdaudio0: Realtek product 0233
 [     1.013774] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
 [     1.013774] hdafg0: DAC01 2ch: Speaker [Jack]
 [     1.013774] hdafg0: ADC02 2ch: Mic In [Jack]
 [     1.013774] hdafg0: ADC03 2ch: Mic In [Jack]
 [     1.013774] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 [     1.013774] audio0 at hdafg0: playback, capture, full duplex, independent
 [     1.013774] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 [     1.013774] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 [     1.013774] spkr0 at audio0: PC Speaker (synthesized)
 [     1.013774] wsbell at spkr0 not configured
 [     1.013774] hdafg1 at hdaudio0: Intel product 2883
 [     1.013774] hdafg1: DP00 8ch: Digital Out [Jack]
 [     1.013774] hdafg1: DP01 8ch: Digital Out [Jack]
 [     1.013774] hdafg1: DP02 8ch: Digital Out [Jack]
 [     1.013774] hdafg1: 8ch/0ch 48000Hz PCM16*
 [     1.013774] audio1 at hdafg1: playback, capture, full duplex, independent
 [     1.013774] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 [     1.013774] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 [     1.013774] spkr1 at audio1: PC Speaker (synthesized)
 [     1.013774] wsbell at spkr1 not configured
 [     1.013774] ppb0 at pci0 dev 28 function 0: Intel Braswell PCIe (rev. 0x35)
 [     1.013774] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
 [     1.013774] pci1 at ppb0 bus 1
 [     1.013774] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 [     1.013774] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
 [     1.013774] re0: interrupting at msix3 vec 0
 [     1.013774] re0: RTL8168G/8111G (0x4c00)
 [     1.013774] re0: Ethernet address xx:xx:xx:xx:xx:xx
 [     1.013774] re0: using 256 tx descriptors
 [     1.013774] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
 [     1.013774] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 [     1.013774] ppb1 at pci0 dev 28 function 1: Intel Braswell PCIe (rev. 0x35)
 [     1.013774] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
 [     1.013774] pci2 at ppb1 bus 2
 [     1.013774] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 [     1.013774] Atheros Communications product 0042 (miscellaneous network, revision 0x30) at pci2 dev 0 function 0 not configured
 [     1.013774] pcib0 at pci0 dev 31 function 0: Intel Braswell PCU LPC (rev. 0x35)
 [     1.013774] ichsmb0 at pci0 dev 31 function 3: Intel Braswell PCU SMBus (rev. 0x35)
 [     1.013774] ichsmb0: interrupting at ioapic0 pin 18
 [     1.013774] iic0 at ichsmb0: I2C bus
 [     1.013774] isa0 at pcib0
 [     1.013774] pcppi0 at isa0 port 0x61
 [     1.013774] spkr2 at pcppi0: PC Speaker
 [     1.013774] wsbell at spkr2 not configured
 [     1.013774] midi0 at pcppi0: PC speaker
 [     1.013774] sysbeep0 at pcppi0
 [     1.013774] attimer1: attached to pcppi0
 [     1.013774] acpicpu0 at cpu0: ACPI CPU
 [     1.013774] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 [     1.013774] acpicpu0: C2: FFH, lat 500 us, pow    10 mW
 [     1.013774] acpicpu0: C3: FFH, lat 1000 us, pow    10 mW
 [     1.013774] acpicpu0: P0: FFH, lat  10 us, pow  2000 mW, 1601 MHz, turbo boost
 [     1.013774] acpicpu0: P1: FFH, lat  10 us, pow  2000 mW, 1600 MHz
 [     1.013774] acpicpu0: P2: FFH, lat  10 us, pow  1900 mW, 1520 MHz
 [     1.013774] acpicpu0: P3: FFH, lat  10 us, pow  1800 mW, 1440 MHz
 [     1.013774] acpicpu0: P4: FFH, lat  10 us, pow  1700 mW, 1360 MHz
 [     1.013774] acpicpu0: P5: FFH, lat  10 us, pow  1600 mW, 1280 MHz
 [     1.013774] acpicpu0: P6: FFH, lat  10 us, pow  1500 mW, 1200 MHz
 [     1.013774] acpicpu0: P7: FFH, lat  10 us, pow  1400 mW, 1120 MHz
 [     1.013774] acpicpu0: P8: FFH, lat  10 us, pow  1300 mW, 1040 MHz
 [     1.013774] acpicpu0: P9: FFH, lat  10 us, pow  1200 mW,  960 MHz
 [     1.013774] acpicpu0: P10: FFH, lat  10 us, pow  1100 mW,  880 MHz
 [     1.013774] acpicpu0: P11: FFH, lat  10 us, pow  1000 mW,  800 MHz
 [     1.013774] acpicpu0: P12: FFH, lat  10 us, pow   900 mW,  720 MHz
 [     1.013774] acpicpu0: P13: FFH, lat  10 us, pow   800 mW,  640 MHz
 [     1.013774] acpicpu0: P14: FFH, lat  10 us, pow   700 mW,  560 MHz
 [     1.013774] acpicpu0: P15: FFH, lat  10 us, pow   600 mW,  480 MHz
 [     1.013774] acpicpu0: T0: FFH, lat   1 us, pow   600 mW, 100 %
 [     1.013774] acpicpu0: T1: FFH, lat   1 us, pow   525 mW,  88 %
 [     1.013774] acpicpu0: T2: FFH, lat   1 us, pow   450 mW,  75 %
 [     1.013774] acpicpu0: T3: FFH, lat   1 us, pow   375 mW,  63 %
 [     1.013774] acpicpu0: T4: FFH, lat   1 us, pow   300 mW,  50 %
 [     1.013774] acpicpu0: T5: FFH, lat   1 us, pow   225 mW,  38 %
 [     1.013774] acpicpu0: T6: FFH, lat   1 us, pow   150 mW,  25 %
 [     1.013774] acpicpu0: T7: FFH, lat   1 us, pow    75 mW,  13 %
 [     1.013774] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
 [     1.013774] acpicpu1 at cpu1: ACPI CPU
 [     1.013774] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
 [     1.013774] acpicpu2 at cpu2: ACPI CPU
 [     1.013774] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=90
 [     1.013774] acpicpu3 at cpu3: ACPI CPU
 [     1.013774] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=90
 [     1.013774] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 [     1.013774] timecounter: Timecounter "TSC" frequency 1602127600 Hz quality 3000
 [     1.835548] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
 [     1.835548] uhub0: 6 ports with 6 removable, self powered
 [     1.835548] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
 [     1.835548] uhub1: 7 ports with 7 removable, self powered
 [     1.842969] IPsec: Initialized Security Association Processing.
 [     1.932960] ahcisata0 port 0: device present, speed: 6.0Gb/s
 [     2.302958] uhub2 at uhub1 port 5: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/2.00, addr 1
 [     2.302958] uhub2: multiple transaction translators
 [     2.302958] uhub2: 4 ports with 4 removable, self powered
 [     2.932955] ahcisata0 port 1: PHY offline
 [     3.052955] ubt0 at uhub2 port 2
 [     3.052955] ubt0: vendor 0cf3 (0x0cf3) product e360 (0xe360), rev 2.01/0.01, addr 2
 [     3.462953] uhub3 at uhub2 port 4: vendor 0557 (0x0557) product 8021 (0x8021), class 9/0, rev 1.10/1.00, addr 3
 [     3.462953] uhub3: 4 ports with 4 removable, self powered
 [     3.492952] wd0 at atabus0 drive 0
 [     3.492952] wd0: <SanDisk SD9TB8W256G1001>
 [     3.492952] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
 [     3.492952] wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
 [     3.492952] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
 [     3.492952] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
 [     4.282949] uhidev0 at uhub3 port 1 configuration 1 interface 0
 [     4.282949] uhidev0: ATEN Advance Tech Inc. (0x0557) CS84U V1.1.101 (0x2213), rev 1.10/1.00, addr 4, iclass 3/1
 [     4.302949] ukbd0 at uhidev0
 [     4.302949] wskbd0 at ukbd0: console keyboard, using wsdisplay0
 [     4.302949] uhidev1 at uhub3 port 1 configuration 1 interface 1
 [     4.302949] uhidev1: ATEN Advance Tech Inc. (0x0557) CS84U V1.1.101 (0x2213), rev 1.10/1.00, addr 4, iclass 3/1
 [     4.332949] ums0 at uhidev1: 5 buttons and Z dir
 [     4.332949] wsmouse0 at ums0 mux 0
 [     4.332949] swwdog0: software watchdog initialized
 [     4.342949] boot device: wd0
 [     4.342949] root on wd0a dumps on wd0b
 [     4.342949] root file system type: ffs
 [     4.342949] kern.module.path=/stand/amd64/10.99.2/modules
 [    13.522907] wsdisplay0: screen 1 added (80x25, vt100 emulation)
 [    13.522907] wsdisplay0: screen 2 added (80x25, vt100 emulation)
 [    13.522907] wsdisplay0: screen 3 added (80x25, vt100 emulation)
 [    13.522907] wsdisplay0: screen 4 added (80x25, vt100 emulation)
 


Home | Main Index | Thread Index | Old Index