Re: port-evbarm/56376

To: port-evbarm-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,mk%kilbi.de@localhost
Subject: Re: port-evbarm/56376
From: Helmut Schlattl <helmut.schlattl%web.de@localhost>
Date: Tue, 5 Oct 2021 17:50:02 +0000 (UTC)
The following reply was made to PR port-evbarm/56376; it has been noted by GNATS.

From: Helmut Schlattl <helmut.schlattl%web.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-evbarm/56376
Date: Tue, 05 Oct 2021 18:03:57 +0200

 Is it possible that the same bug is causing problems using the orange
 emmc (32GB) module on an Odroid XU4?=C2=A0
 I'm always getting the error "sdmmc_mem_enable failed with error 60",
 i.e., the same as if no card is present.
 
 Actually I could not find a netbsd-version which would recognize the
 emmc card.
 
 Here the output when booting from the emmc card:
 
  NetBSD/evbarm (fdt) booting ...
  [ Kernel symbol table missing! ]
  Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 2005,
      2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016,
 2017,
      2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights
 reserved.
  Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
  NetBSD 9.99.83 (GENERIC) #0: Sun Jun  6 18:37:20 UTC 2021
 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compile/GENERIC
  total memory =3D 2026 MB
  avail memory =3D 1970 MB
  armfdt0 (root)
  simplebus0 at armfdt0: Hardkernel Odroid XU4
  simplebus1 at simplebus0
  cpus0 at simplebus0
  simplebus2 at simplebus0
  cpu0 at cpus0: Cortex-A7 r0p3 (Cortex V7A core)
  cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
  cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
  cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
  cpu0: 512KB/64B 8-way write-through L2 PIPT Unified cache
  vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation,
 denormals
  cpufreqdt0 at cpu0
  cpu1 at cpus0
  cpufreqdt1 at cpu1
  cpu2 at cpus0
  cpufreqdt2 at cpu2
  cpu3 at cpus0
  cpufreqdt3 at cpu3
  cpu4 at cpus0
  cpufreqdt4 at cpu4
  simplebus3 at simplebus1
  gic0 at simplebus1: GIC
  armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
  armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
  syscon0 at simplebus1: System Controller Registers
  syscon1 at simplebus1: System Controller Registers
  exyointr0 at simplebus1 @ 0x10440000: interrupt combiner
  syscon2 at simplebus1: System Controller Registers
  gtmr0 at simplebus0: Generic Timer
  gtmr0: interrupting on GIC irq 27
  armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
  exyopctl0 at simplebus1 pinctrl @ 0x14010000=20
  gpio0 at exyopctl0 (gpa0): 8 pins
  gpio1 at exyopctl0 (gpa1): 6 pins
  gpio2 at exyopctl0 (gpa2): 8 pins
  gpio3 at exyopctl0 (gpb0): 5 pins
  gpio4 at exyopctl0 (gpb1): 5 pins
  gpio5 at exyopctl0 (gpb2): 4 pins
  gpio6 at exyopctl0 (gpb3): 8 pins
  gpio7 at exyopctl0 (gpb4): 2 pins
  gpio8 at exyopctl0 (gph0): 4 pins
  exyopctl1 at simplebus1 pinctrl @ 0x13400000=20
  gpio9 at exyopctl1 (gpy7): 8 pins
  gpio10 at exyopctl1 (gpx0): 8 pins
  gpio11 at exyopctl1 (gpx1): 8 pins
  gpio12 at exyopctl1 (gpx2): 8 pins
  gpio13 at exyopctl1 (gpx3): 8 pins
  exyopctl2 at simplebus1 pinctrl @ 0x13410000=20
  gpio14 at exyopctl2 (gpc0): 8 pins
  gpio15 at exyopctl2 (gpc1): 8 pins
  gpio16 at exyopctl2 (gpc2): 7 pins
  gpio17 at exyopctl2 (gpc3): 4 pins
  gpio18 at exyopctl2 (gpc4): 2 pins
  gpio19 at exyopctl2 (gpd1): 8 pins
  gpio20 at exyopctl2 (gpy0): 6 pins
  gpio21 at exyopctl2 (gpy1): 4 pins
  gpio22 at exyopctl2 (gpy2): 6 pins
  gpio23 at exyopctl2 (gpy3): 8 pins
  gpio24 at exyopctl2 (gpy4): 8 pins
  gpio25 at exyopctl2 (gpy5): 8 pins
  gpio26 at exyopctl2 (gpy6): 8 pins
  exyopctl3 at simplebus1 pinctrl @ 0x03860000=20
  gpio27 at exyopctl3 (gpz): 7 pins
  mct0 at simplebus1: Exynos SoC multi core timer (64 bits)
  exyopctl4 at simplebus1 pinctrl @ 0x14000000=20
  gpio28 at exyopctl4 (gpe0): 8 pins
  gpio29 at exyopctl4 (gpe1): 2 pins
  gpio30 at exyopctl4 (gpf0): 6 pins
  gpio31 at exyopctl4 (gpf1): 8 pins
  gpio32 at exyopctl4 (gpg0): 8 pins
  gpio33 at exyopctl4 (gpg1): 8 pins
  gpio34 at exyopctl4 (gpg2): 2 pins
  gpio35 at exyopctl4 (gpj4): 4 pins
  exy5422clk0 at simplebus1: Exynos5422 Clock Controller
  expwm0 at simplebus1: PWM
  exuart0 at simplebus1
  exuart0: interrupting on GIC irq 83
  exuart1 at simplebus1
  exuart1: interrupting on GIC irq 84
  exuart2 at simplebus1: console
  exuart2: interrupting on GIC irq 85
  exuart3 at simplebus1
  exuart3: interrupting on GIC irq 86
  exusbdrdphy0 at simplebus1: USB DRD PHY
  exusbdrdphy1 at simplebus1: USB DRD PHY
  exusbphy0 at simplebus1: USB2 PHY
  /soc/amba/pdma@121a0000 at simplebus3 not configured
  /soc/amba/pdma@121b0000 at simplebus3 not configured
  /soc/i2c@12ca0000 at simplebus1 not configured
  /soc/power-domain@100440c0 at simplebus1 not configured
  /soc/sysmmu@14640000 at simplebus1 not configured
  /soc/sysmmu@14680000 at simplebus1 not configured
  /soc/dp-video-phy at simplebus1 not configured
  /soc/sysmmu@10a60000 at simplebus1 not configured
  /soc/sysmmu@10a70000 at simplebus1 not configured
  /soc/power-domain@100440e0 at simplebus1 not configured
  /soc/audss-clock-controller@3810000 at simplebus1 not configured
  /soc/power-domain@10044060 at simplebus1 not configured
  /soc/sysmmu@11200000 at simplebus1 not configured
  /soc/sysmmu@11210000 at simplebus1 not configured
  mmcpwrseq0 at simplebus0: eMMC hardware reset provider
  /soc/ppmu@10d00000 at simplebus1 not configured
  /soc/ppmu@10d10000 at simplebus1 not configured
  /soc/ppmu@10d60000 at simplebus1 not configured
  /soc/ppmu@10d70000 at simplebus1 not configured
  /lpddr3 at simplebus0 not configured
  /opp_table2 at simplebus0 not configured
  /soc/amba/adma@3880000 at simplebus3 not configured
  /soc/i2s@3830000 at simplebus1 not configured
  /soc/mipi-video-phy at simplebus1 not configured
  exyoi2c0 at simplebus1 @ 0x12c80000
  exyoi2c0: interrupting on GIC irq 90
  iic0 at exyoi2c0: I2C bus
  /soc/hdmi@14530000 at simplebus1 not configured
  /soc/sysmmu@14650000 at simplebus1 not configured
  /soc/sysmmu@11d40000 at simplebus1 not configured
  /soc/power-domain@10044000 at simplebus1 not configured
  /soc/sysmmu@13e80000 at simplebus1 not configured
  /soc/sysmmu@13e90000 at simplebus1 not configured
  /soc/power-domain@10044120 at simplebus1 not configured
  /soc/sysmmu@12880000 at simplebus1 not configured
  /soc/sysmmu@128c0000 at simplebus1 not configured
  /soc/sysmmu@12890000 at simplebus1 not configured
  /soc/sysmmu@128d0000 at simplebus1 not configured
  /soc/sysmmu@128a0000 at simplebus1 not configured
  /soc/sysmmu@128e0000 at simplebus1 not configured
  /soc/sysmmu@11f10000 at simplebus1 not configured
  /soc/sysmmu@11f20000 at simplebus1 not configured
  /soc/opp_table2 at simplebus1 not configured
  /soc/nocp@10ca1000 at simplebus1 not configured
  /soc/nocp@10ca1400 at simplebus1 not configured
  /soc/nocp@10ca1800 at simplebus1 not configured
  /soc/nocp@10ca1c00 at simplebus1 not configured
  /soc/opp_table3 at simplebus1 not configured
  /soc/bus_wcore at simplebus1 not configured
  /soc/opp_table4 at simplebus1 not configured
  /soc/opp_table5 at simplebus1 not configured
  /soc/opp_table6 at simplebus1 not configured
  /soc/opp_table7 at simplebus1 not configured
  /soc/opp_table8 at simplebus1 not configured
  /soc/opp_table9 at simplebus1 not configured
  /soc/opp_table10 at simplebus1 not configured
  /soc/opp_table11 at simplebus1 not configured
  /soc/opp_table12 at simplebus1 not configured
  /soc/opp_table13 at simplebus1 not configured
  /soc/opp_table14 at simplebus1 not configured
  /soc/opp_table15 at simplebus1 not configured
  /soc/opp_table16 at simplebus1 not configured
  /soc/tmu@10060000 at simplebus1 not configured
  pwmfan0 at simplebus0: PWM Fan (levels 0% 50% 66% 90%)
  /soc/tmu@10064000 at simplebus1 not configured
  /soc/tmu@10068000 at simplebus1 not configured
  /soc/tmu@1006c000 at simplebus1 not configured
  /soc/tmu@100a0000 at simplebus1 not configured
  /soc/cci@10d20000 at simplebus1 not configured
  /opp_table1 at simplebus0 not configured
  /opp_table0 at simplebus0 not configured
  /soc/memory-controller@12250000 at simplebus1 not configured
  /soc/rtc@101e0000 at simplebus1 not configured
  /soc/sss@10830000 at simplebus1 not configured
  /soc/rng@10830400 at simplebus1 not configured
  /soc/rng@10830600 at simplebus1 not configured
  /soc/g2d@10850000 at simplebus1 not configured
  /soc/watchdog@101d0000 at simplebus1 not configured
  /soc/adc@12d10000 at simplebus1 not configured
  xhci0 at simplebus1: DesignWare USB3 XHCI (rev. 2.00a)
  xhci0: interrupting on GIC irq 104
  usb0 at xhci0: USB revision 3.0
  usb1 at xhci0: USB revision 2.0
  xhci1 at simplebus1: DesignWare USB3 XHCI (rev. 2.00a)
  xhci1: interrupting on GIC irq 105
  usb2 at xhci1: USB revision 3.0
  usb3 at xhci1: USB revision 2.0
  ehci0 at simplebus1: Exynos EHCI
  ehci0: interrupting on GIC irq 103
  uhci probably not configured
  usb4 at ehci0: USB revision 2.0
  ohci0 at simplebus1: Exynos OHCI
  ohci0: interrupting on GIC irq 103
  ohci0: OHCI version 0.0
  ohci0: unsupported OHCI revision
  ohci0: init failed, error =3D -1
  /soc/codec@11000000 at simplebus1 not configured
  dwcmmc0 at simplebus1: MHS (100000000 Hz)
  dwcmmc0: interrupting on GIC irq 107
  dwcmmc1 at simplebus1: MHS (100000000 Hz)
  dwcmmc1: interrupting on GIC irq 109
  /soc/memory-controller@10c20000 at simplebus1 not configured
  /soc/power-domain@10044020 at simplebus1 not configured
  /soc/power-domain@10044080 at simplebus1 not configured
  /soc/amba/mdma@10800000 at simplebus3 not configured
  /soc/cec@101b0000 at simplebus1 not configured
  /soc/mixer@14450000 at simplebus1 not configured
  /soc/rotator@11c00000 at simplebus1 not configured
  /soc/video-scaler@13e00000 at simplebus1 not configured
  /soc/video-scaler@13e10000 at simplebus1 not configured
  /soc/scaler@12800000 at simplebus1 not configured
  /soc/scaler@12810000 at simplebus1 not configured
  /soc/scaler@12820000 at simplebus1 not configured
  /soc/jpeg@11f50000 at simplebus1 not configured
  /soc/jpeg@11f60000 at simplebus1 not configured
  /soc/system-controller@10040000/syscon-poweroff at syscon1 not
 configured
  /soc/system-controller@10040000/syscon-reboot at syscon1 not
 configured
  /soc/bus_noc at simplebus1 not configured
  /soc/bus_fsys_apb at simplebus1 not configured
  /soc/bus_fsys at simplebus1 not configured
  /soc/bus_fsys2 at simplebus1 not configured
  /soc/bus_mfc at simplebus1 not configured
  /soc/bus_gen at simplebus1 not configured
  /soc/bus_peri at simplebus1 not configured
  /soc/bus_g2d at simplebus1 not configured
  /soc/bus_g2d_acp at simplebus1 not configured
  /soc/bus_jpeg at simplebus1 not configured
  /soc/bus_jpeg_apb at simplebus1 not configured
  /soc/bus_disp1_fimd at simplebus1 not configured
  /soc/bus_disp1 at simplebus1 not configured
  /soc/bus_gscl_scaler at simplebus1 not configured
  /soc/bus_mscl at simplebus1 not configured
  /soc/power-domain@10045100 at simplebus1 not configured
  armpmu0 at simplebus0: Performance Monitor Unit
  /arm-a15-pmu at simplebus0 not configured
  /sound at simplebus0 not configured
  /firmware@2073000 at simplebus0 not configured
  gpiokeys0 at simplebus0: power key
  /pwmleds at simplebus0 not configured
  /soc/sram@2020000 at simplebus1 not configured
  entropy: WARNING: extracting entropy too early
  cpu2: Cortex-A15 r2p3 (Cortex V7A core)
  cpu2: DC enabled IC enabled WB enabled LABT branch prediction enabled
  cpu2: 32KB/32B 2-way L1 VIPT Instruction cache
  cpu2: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
  cpu2: 512KB/64B 8-way write-through L2 PIPT Unified cache
  vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation,
 denormals
  cpu3: Cortex-A15 r2p3 (Cortex V7A core)
  cpu3: DC enabled IC enabled WB enabled LABT branch prediction enabled
  cpu3: 32KB/32B 2-way L1 VIPT Instruction cache
  cpu3: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
  cpu3: 512KB/64B 8-way write-through L2 PIPT Unified cache
  vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation,
 denormals
  cpu1: Cortex-A15 r2p3 (Cortex V7A core)
  cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled
  cpu1: 32KB/32B 2-way L1 VIPT Instruction cache
  cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
  cpu1: 512KB/64B 8-way write-through L2 PIPT Unified cache
  vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation,
 denormals
  cpu4: Cortex-A15 r2p3 (Cortex V7A core)
  cpu4: DC enabled IC enabled WB enabled LABT branch prediction enabled
  cpu4: 32KB/32B 2-way L1 VIPT Instruction cache
  cpu4: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
  cpu4: 512KB/64B 8-way write-through L2 PIPT Unified cache
  vfp4 at cpu4: NEON MPE (VFP 3.0+), rounding, NaN propagation,
 denormals
  cpufreqdt0: couldn't acquire cpu-supply
  cpufreqdt1: couldn't acquire cpu-supply
  cpufreqdt2: couldn't acquire clock
  cpufreqdt3: couldn't acquire clock
  cpufreqdt4: couldn't acquire clock
  uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
 3.00/1.00, addr 0
  uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
 2.00/1.00, addr 0
  uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
 3.00/1.00, addr 0
  uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
 2.00/1.00, addr 0
  sdmmc0 at dwcmmc0
  sdmmc1 at dwcmmc1
  armpmu0: interrupting on GIC irq 192
  armpmu0: interrupting on GIC irq 193
  armpmu0: interrupting on GIC irq 194
  armpmu0: interrupting on GIC irq 195
  armpmu0: failed to distribute interrupt 1: 2
  uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev
 2.00/1.00, addr 1
 ice is not a hub
  sdmmc1: sdmmc_mem_enable failed with error 60
  sdmmc1: couldn't enable card: 60
  sdmmc0: sdmmc_mem_enable failed with error 60
  sdmmc0: couldn't enable card: 60
  uhub5 at uhub0 port 1: GenesysLogic (0x05e3) USB3.0 Hub (0x0616),
 class 9/0, rev 3.00/22.23, addr 1
  uhub3: port 1, device not enabled
  uhub6 at uhub1 port 1: GenesysLogic (0x05e3) USB2.0 Hub (0x0610),
 class 9/0, rev 2.10/22.23, addr 2
  uhub6: multiple transaction translators
  ure0 at uhub3 port 1
  ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00,
 addr 1
  ure0: RTL8153 ver 5c20
  rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0
  rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-
 FDX, auto
  ure0: Ethernet address 00:1e:06:37:d9:a7
  WARNING: 12 errors while detecting hardware; check system log.
  boot device: <unknown>
  root device:=20
Follow-Ups:
- Re: port-evbarm/56376
  - From: Markus Kilbinger
Prev by Date: Re: kern/56429 (poll(2) should yield POLLHUP when last writer to a fifo close()'s it)
Next by Date: RE: lib/56424 (recvfrom() is not a cancelation point as documented in pthread_setcanceltype.3)
Previous by Thread: Re: port-evbarm/56376
Next by Thread: Re: port-evbarm/56376
Indexes:
Home | Main Index | Thread Index | Old Index