Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping interrupts fail))

To: port-amd64-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,coypu%sdf.org@localhost
Subject: Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping interrupts fail))
From: coypu%sdf.org@localhost
Date: Wed, 1 May 2019 15:10:01 +0000 (UTC)

The following reply was made to PR port-amd64/54147; it has been noted by GNATS.

From: coypu%sdf.org@localhost
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping
 interrupts fail))
Date: Wed, 1 May 2019 15:07:16 +0000

 hmm, I wonder if it is too early for most printfs to be visible.
 The only additional messages I get are at the beginning, but all of the
 boot log is:
 
 > boot hd0a:new
 WARNING: couldn't open msdos (hd0a:/stand/amd64/8.99.37/modules/msdos/msdos.kmod)
 20961128+661280+1435872 [1246224+888158]=0x1809ac8
 WARNING: couldn't open msdos (hd0a:/stand/amd64/8.99.37/modules/msdos/msdos.kmod)
 WARNING: 1 module failed to load
 [   1.0000000] loading freelist 5 0x8000-0x58000 (0x8-0x58)
 [   1.0000000] loading freelist 5 0x100000-0x200000 (0x100-0x200)
 [   1.0000000] loading freelist 4 0x1a5a000-0x40000000 (0x1a5a-0x40000)
 [   1.0000000] loading default 0x40000000-0x8d1c7000 (0x40000-0x8d1c7)
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
 [   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights reserved.
 
 [   1.0000000] NetBSD 8.99.37 (GENERIC) #27: Wed May  1 17:27:05 IDT 2019
 [   1.0000000]  fly@plu:/home/fly/obj/sys/arch/amd64/compile/GENERIC
 [   1.0000000] total memory = 2257 MB
 [   1.0000000] avail memory = 2166 MB
 [   1.0000000] cpu_rng: RDSEED
 [   1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
 [   1.0000030] efi: systbl at pa 8c636018
 [   1.0000030] mainbus0 (root)
 [   1.0000030] ACPI: RSDP 0x000000008DFFE014 000024 (v02 INTEL )
 [   1.0000030] ACPI: XSDT 0x000000008DFB7188 0000D4 (v01 INTEL  S1200SPL 00000000 INTL 01000013)
 [   1.0000030] ACPI: FACP 0x000000008DFF6000 0000F4 (v05 INTEL  S1200SPL 00000000 INTL 20091013)
 [   1.0000030] ACPI: DSDT 0x000000008DFC6000 029241 (v02 INTEL  S1200SPL 00000000 INTL 20091013)
 [   1.0000030] ACPI: FACS 0x000000008DF7E000 000040
 [   1.0000030] ACPI: HPET 0x000000008DFF5000 000038 (v01 INTEL  S1200SPL 00000001 INTL 20091013)
 [   1.0000030] ACPI: APIC 0x000000008DFF4000 0000BC (v03 INTEL  S1200SPL 00000001 INTL 20091013)
 [   1.0000030] ACPI: MCFG 0x000000008DFF3000 00003C (v01 INTEL  S1200SPL 00000001 INTL 20091013)
 [   1.0000030] ACPI: SPMI 0x000000008DFF1000 000042 (v05 INTEL  S1200SPL 00000000 INTL 20091013)
 [   1.0000030] ACPI: WDDT 0x000000008DFF0000 000040 (v01 INTEL  S1200SPL 00000000 INTL 20091013)
 [   1.0000030] ACPI: SSDT 0x000000008DFC3000 002BAE (v02 INTEL  S1200SPL 00001000 INTL 20091013)
 [   1.0000030] ACPI: SSDT 0x000000008DFC2000 000BE3 (v02 INTEL  S1200SPL 00001000 INTL 20091013)
 [   1.0000030] ACPI: SSDT 0x000000008DFC1000 00019A (v02 INTEL  S1200SPL 00001000 INTL 20091013)
 [   1.0000030] ACPI: SSDT 0x000000008DFC0000 0004A3 (v02 INTEL  S1200SPL 00001000 INTL 20091013)
 [   1.0000030] ACPI: UEFI 0x000000008DF93000 000042 (v01 INTEL  S1200SPL 00000002 INTL 01000013)
 [   1.0000030] ACPI: SSDT 0x000000008DFBF000 000E73 (v02 INTEL  S1200SPL 00003000 INTL 20141107)
 [   1.0000030] ACPI: SSDT 0x000000008DFBD000 000064 (v02 INTEL  S1200SPL 00000002 INTL 20141107)
 [   1.0000030] ACPI: DMAR 0x000000008DFBB000 000070 (v01 INTEL  S1200SPL 00000001 INTL 00000001)
 [   1.0000030] ACPI: HEST 0x000000008DFBA000 0000A8 (v01 INTEL  S1200SPL 00000001 INTL 00000001)
 [   1.0000030] ACPI: ERST 0x000000008DFB8000 000230 (v01 INTEL  S1200SPL 00000001 INTL 00000001)
 [   1.0000030] ACPI: SSDT 0x000000008DFF7000 005328 (v02 INTEL  S1200SPL 00003000 INTL 20141107)
 [   1.0000030] ACPI: SSDT 0x000000008DFBE000 000B79 (v02 INTEL  S1200SPL 00000002 INTL 20141107)
 [   1.0000030] ACPI: BERT 0x000000008DFB9000 000030 (v01 INTEL  S1200SPL 00000001 INTL 00000001)
 [   1.0000030] ACPI: PRAD 0x000000008DFBC000 000102 (v02 INTEL  S1200SPL 00000002 INTL 20141107)
 [   1.0000030] ACPI: EINJ 0x000000008DFFD000 000130 (v01 INTEL  S1200SPL 00000001 INTL 00000001)
 [   1.0000030] ACPI: SPCR 0x000000008DFF2000 000050 (v01 INTEL  S1200SPL 00000000 INTL 20091013)
 [   1.0000030] ACPI: 9 ACPI AML tables successfully acquired and loaded
 [   1.0000030] Firmware Error (ACPI): A valid RSDP was not found (20190405/tbxfroot-261)
 acpi_probe: failed to map RSDT
 [   1.0000030] ACPI Error: Could not remove SCI handler (20190405/evmisc-312)
 [   1.0000030] cpu0 at mainbus0
 [   1.0000030] cpu0: Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz, id 0x906e9
 [   1.0000030] cpu0: package 0, core 0, smt 0
 [   1.0000030] ipmi0 at mainbus0
 [   1.0000030] pci0 at mainbus0 bus 0: configuration mode 1
 [   1.0000030] pchb0 at pci0 dev 0 function 0: vendor 8086 product 5918 (rev. 0x05)
 [   1.0000030] xhci0 at pci0 dev 20 function 0: vendor 8086 product a12f (rev. 0x31)
 [   1.0000030] pci_intr_map: no mapping for pin A (line=ff)
 [   1.0000030] cannot set up pci_intr_handle_t
 [   1.0000030] xhci0: can't allocate handler
 [   1.0000030] vendor 8086 product a131 (miscellaneous DASP, revision 0x31) at pci0 dev 20 function 2 not configured
 [   1.0000030] vendor 8086 product a13a (miscellaneous communications, revision 0x31) at pci0 dev 22 function 0 not configured
 [   1.0000030] vendor 8086 product a13b (miscellaneous communications, revision 0x31) at pci0 dev 22 function 1 not configured
 [   1.0000030] ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a102 (rev. 0x31)
 [   1.0000030] pci_intr_map: no mapping for pin A (line=ff)
 [   1.0000030] cannot set up pci_intr_handle_t
 [   1.0000030] ahcisata0: can't allocate handler
 [   1.0000030] ppb0 at pci0 dev 29 function 0: vendor 8086 product a119 (rev. 0xf1)
 [   1.0000030] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
 [   1.0000030] ppb0: link is x1 @ 2.5GT/s
 [   1.0000030] pci1 at ppb0 bus 1
 [   1.0000030] genfb0 at pci1 dev 0 function 0: vendor 102b product 0522 (rev. 0x05)
 [   1.0000030] wsdisplay0 at genfb0 kbdmux 1
 [   1.0000030] drm at genfb0 not configured
 [   1.0000030] ppb1 at pci0 dev 29 function 2: vendor 8086 product a11a (rev. 0xf1)
 [   1.0000030] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
 [   1.0000030] ppb1: link is x1 @ 2.5GT/s
 [   1.0000030] pci2 at ppb1 bus 2
 [   1.0000030] wm0 at pci2 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
 [   1.0000030] pci_intr_map: no mapping for pin A (line=ff)
 [   1.0000030] cannot set up pci_intr_handle_t
 [   1.0000030] wm0: failed to allocate interrupt
 [   1.0000030] ppb2 at pci0 dev 29 function 3: vendor 8086 product a11b (rev. 0xf1)
 [   1.0000030] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
 [   1.0000030] ppb2: link is x1 @ 2.5GT/s
 [   1.0000030] pci3 at ppb2 bus 3
 [   1.0000030] wm1 at pci3 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
 [   1.0000030] pci_intr_map: no mapping for pin A (line=ff)
 [   1.0000030] cannot set up pci_intr_handle_t
 [   1.0000030] wm1: failed to allocate interrupt
 [   1.0000030] pcib0 at pci0 dev 31 function 0: vendor 8086 product a149 (rev. 0x31)
 [   1.0000030] vendor 8086 product a121 (miscellaneous memory, revision 0x31) at pci0 dev 31 function 2 not configured
 [   1.0000030] ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a123 (rev. 0x31)
 [   1.0000030] pci_intr_map: no mapping for pin A (line=ff)
 [   1.0000030] cannot set up pci_intr_handle_t
 [   1.0000030] ichsmb0: polling
 [   1.0000030] iic0 at ichsmb0: I2C bus
 [   1.0000030] isa0 at pcib0
 [   1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 [   1.0000030] com0: console
 [   1.0000030] attimer0 at isa0 port 0x40-0x43
 [   1.0000030] pcppi0 at isa0 port 0x61
 [   1.0000030] spkr0 at pcppi0: PC Speaker
 [   1.0000030] wsbell at spkr0 not configured
 [   1.0000030] midi0 at pcppi0: PC speaker
 [   1.0000030] sysbeep0 at pcppi0
 [   1.0000030] attimer0: attached to pcppi0
 [   1.0000030] coretemp0 at cpu0: thermal sensor, 1 C resolution
 [   1.0125560] WARNING: 5 errors while detecting hardware; check system log.
 [   1.0949255] boot device: <unknown>
 [   1.1400082] root device:

Prev by Date: Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping interrupts fail))
Next by Date: NetBSD Nightly Trouble Ticket Report
Previous by Thread: Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping interrupts fail))
Next by Thread: Re: port-amd64/54147 (device trouble (failed to map RSDT, mapping interrupts fail))
Indexes:

Home | Main Index | Thread Index | Old Index