PR/52818 CVS commit: [netbsd-7] src

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,clare%csel.org@localhost
Subject: PR/52818 CVS commit: [netbsd-7] src
From: "Martin Husemann" <martin%netbsd.org@localhost>
Date: Sat, 11 Aug 2018 13:35:02 +0000 (UTC)

The following reply was made to PR kern/52818; it has been noted by GNATS.

From: "Martin Husemann" <martin%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: PR/52818 CVS commit: [netbsd-7] src
Date: Sat, 11 Aug 2018 13:34:21 +0000

 Module Name:	src
 Committed By:	martin
 Date:		Sat Aug 11 13:34:21 UTC 2018
 
 Modified Files:
 	src/share/man/man4 [netbsd-7]: wm.4
 	src/sys/dev/mii [netbsd-7]: ihphyreg.h inbmphyreg.h
 	src/sys/dev/pci [netbsd-7]: if_wm.c if_wmreg.h if_wmvar.h pcidevs
 	    pcireg.h
 
 Log Message:
 Pull up the following, requested by msaitoh in ticket #1628:
 
 share/man/man4/wm.4				1.40 via patch
 sys/dev/mii/ihphyreg.h				1.2
 sys/dev/mii/inbmphyreg.h			1.10
 sys/dev/pci/if_wm.c				1.504, 1.506, 1.510-1.535, 1.539-1.540, 1.546, 1.548, 1.551-1.552, 1.558, 1.565-1.573, 1.575, 1.579, 1.582, 1.584 via patch
 sys/dev/pci/if_wmreg.h				1.99-1.103, 1.106-1.107 via patch
 sys/dev/pci/if_wmvar.h				1.34-1.39 via patch
 sys/dev/pci/pcidevs				1.1327 via patch
 sys/dev/pci/pcidevs.h				regen
 sys/dev/pci/pcidevs_data.h			regen
 sys/dev/pci/pcireg.h				patch
 
 	Sync wm(4) up to 2018/08/08 except MSI/MSI-X and NET_MPSAFE:
 	- remove extra "+"
 	- Fix a bug that non-GMII devices don't send a routing message when
 	  the link status is changed.
 	- Set WMREG_KABGTXD not in wm_init_locked() but in wm_reset(). Same as
 	  other OSes.
 	- If a interrupt is a spurious interrupt, don't print debug message.
 	- Don't print the Image Unique ID if an NVM is iNVM (i210 and I211).
 	- Print sc_flags with snprintb().
 	- Fix a bug that a RAL was written at incorrect address when the index
 	  number is more than 16 on 82544 and newer.
 	- The layout of RAL on PCH* are different from others. Fix it.
 	- Flush every MTA write. Same as Linux.
 	- Move the location of calling wm_set_filter. Same as some other OSes.
 	- Add CSR_WRITE_FLUSH() after writing WMREG_CTRL in
 	  wm_gmii_mediachange().
 	- Add missing "else" in wm_nvm_release().
 	- Make new wm_phy_post_reset() and use this function at all location
 	  after resetting phy.
 	- Move the location of calling wm_get_hw_control. Same as Linux.
 	- Add I219 specific wokaround for legacy interrupt. From OpenBSD.
 	- Move the location of calling wm_lplu_d0_disable().
 	- Fix latency calculation in wm_platform_pm_pch_lpt().
 	- Set OBFF water mark and enable OBFF on PCH_LPT and newer.
 	- Disable D0 LPLU on 8257[12356], 82580, I350 and I21[01], too.	Before
 	  this commit, above devices and non-PCIe devices accessed wrong
 	  register.
 	- Use device_printf() instead of aprint_error_dev() for PHY read/write
 	  functions because those are used not only in device attach.
 	- Fix a bug that wm_gmii_i82544_{read,write}reg() didn't take care of
 	  page select. PHY access from igphy() automatically did it, but
 	  accessing from wm(4) for wrokaround didn't work correctly. This
 	  change affects 8254[17], 8257[12] ICH8, ICH9 and ICH10.
 	- Call wm_kmrn_lock_loss_workaround_ich8lan() before any PHY access in
 	  wm_linkintr_gmii().
 	- Register access in wm_kmrn_lock_loss_workaround_ich8lan() now works
 	  correctly. Enable this function.
 	- Configure the LCD with the extended configuration region in NVM if
 	  it's required.
 	- If TX is not required to flush, RX is also not required to flush
 	  in wm_flush_desc_rings(). Same as other OSes.
 	- Remove wrong semaphore access in wm_nvm_{read,write}_{ich8,spt} to
 	  prevent hangup. A semaphore is get/put in wm_nvm_{read,write}.
 	- Move some initialization stuff in wm_attach() before wm_reset(). Some
 	  flags and callback function are required to set correctly before
 	  wm_reset() because wm_reset() and some helper functions refer them.
 	- Add wm_write_smbus_addr() to set SMBus address by software.
 	- Modify wm_gmii_hv_{read,write}reg_locked() to make them access
 	  HV_SMB_ADDR correctly.
 	- Use new nvm.{acquire,release}() for semaphore.
 	- Our MII readreg/writereg API has not way to detect an error.
 	  kmrn_{read,write}reg() are not used for MII API, so it's not required
 	  for these functions to use the same API. So,
 	  - Change return value as error code.
 	  - Change register value from int to uint16_t.
 	  - read: pass pointer for uint16_t as an argument.
 	  - Check return value on caller side.
 	- Check whether it's required to use MDIC workaround for 80003 or not
 	  in wm_reset(). If the workaround isn't required, don't use the
 	  workaround code in wm_gmii_i80003_{read,write}reg.
 	- Add WM_F_WA_I210_CLSEM flag for a workaround. FreeBSD/Linux drivers
 	  say "In rare circumstances, the SW semaphore may already be held
 	  unintentionally on I21[01]". PXE boot is one of the case.
 	- Qemu's e1000e emulation (82574L)'s SPI has only 64 words. I've never
 	  seen on real 82574 hardware with such small SPI ROM. Check
 	  sc->sc_nvm_wordsize before accessing higher address words to prevent
 	  timeout.
 	- Check some wm_nvm_read()'s return vale.
 	- Print NVM offset and word count when EERD polling failed.
 	- On I219, drop TARC0 bit 28 for DMA hang workaround (from Linux).
 	- 82583 supports jumbo frame. Fixes PR#52773 reported by
 	  Shinichi Doyashiki.
 	- Fix typo in comment. Reported by Shinichi Doyashiki in PR#52885.
 	- Add ASPM workaround for 8257[1234] and 82583 to prevent device
 	  timeout or hangup. Fixes PR#52818 reported by Shinichi Doyashiki.
 	- CID-1427779: Fix uninitialized variables.
 	- Fix a bug that wm_pll_workaround_i210() is not called when
 	  a) Chip is I211 or b) Chip is I210 and it uses iNVM (not FLASH).
 	- Do wm_reset_mdicnfg_82580() on 82580 only.
 	- Fix FLASH access on PCH_SPT and newer. Their FLASH access should be
 	  done by 32bit. Especially for ICH_FLASH_HSFCTL register, it's located
 	  at 0x0006, so it must be accessed via ICH_FLASH_HSFSTS(0x0004) and
 	  use shift or mask.
 	- Make wm_nvm_valid_bank_detect_ich8lan() the same as other OSes.
 	- If the extended configuration size in the EXTCNFSIZE register is 0,
 	  don't continue in wm_init_lcd_from_nvm().
 	- Add PCH_CNP support (I219 with Intel 300 series chipset).
 	- Enable I219 support.
 	- I354 uses an external PHY, so don't use wm_set_eee_i350().
 	- Fix a bug that the link can't detect in link interrupt function for
 	  non-SERDES fiber.
 	- Fix a bug that 82542 misunderstand fiber's signal detection.
 	- Add debug printf()s.
 	- Update comment.
 	- Rename functions and variables.
 	- Add diagnostic code.
 	- Sort registers.
 	- Lowercase hexadecimal values.
 	- KNF.
 
 
 To generate a diff of this commit:
 cvs rdiff -u -r1.30.2.1 -r1.30.2.2 src/share/man/man4/wm.4
 cvs rdiff -u -r1.1 -r1.1.38.1 src/sys/dev/mii/ihphyreg.h
 cvs rdiff -u -r1.3.30.1 -r1.3.30.2 src/sys/dev/mii/inbmphyreg.h
 cvs rdiff -u -r1.289.2.14 -r1.289.2.15 src/sys/dev/pci/if_wm.c
 cvs rdiff -u -r1.60.2.8 -r1.60.2.9 src/sys/dev/pci/if_wmreg.h
 cvs rdiff -u -r1.19.2.6 -r1.19.2.7 src/sys/dev/pci/if_wmvar.h
 cvs rdiff -u -r1.1199.2.11 -r1.1199.2.12 src/sys/dev/pci/pcidevs
 cvs rdiff -u -r1.95.2.3 -r1.95.2.4 src/sys/dev/pci/pcireg.h
 
 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.

Prev by Date: PR/52885 CVS commit: [netbsd-7] src
Next by Date: bin/53512: A dynamically configured which has not yet obtained an address can cause npf & npfd to fail
Previous by Thread: PR/52885 CVS commit: [netbsd-7] src
Next by Thread: bin/53512: A dynamically configured which has not yet obtained an address can cause npf & npfd to fail
Indexes:

Home | Main Index | Thread Index | Old Index