NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/53502: EFI booting of amd64 8.0 boot CD fails to detect all memory



The following reply was made to PR port-amd64/53502; it has been noted by GNATS.

From: scole_mail <scole_mail%gmx.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-amd64/53502: EFI booting of amd64 8.0 boot CD fails to detect all memory
Date: Sun, 05 Aug 2018 23:53:11 -0700

 EFI boot:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
     2018 The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
 total memory = 3289 MB
 avail memory = 3169 MB
 cpu_rng: RDRAND
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 running cgd selftest aes-xts-256 aes-xts-512 done
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 efi: systbl at pa def85f18
 MSI MS-7923 (1.0)
 mainbus0 (root)
 ACPI: RSDP 0x00000000DE549000 000024 (v02 ALASKA)
 ACPI: XSDT 0x00000000DE549088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
 ACPI: FACP 0x00000000DE55BBE0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
 ACPI: DSDT 0x00000000DE5491B8 012A25 (v02 ALASKA A M I    00000006 INTL 20120711)
 ACPI: FACS 0x00000000DE580F80 000040
 ACPI: APIC 0x00000000DE55BCF0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
 ACPI: FPDT 0x00000000DE55BD68 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
 ACPI: SSDT 0x00000000DE55BDB0 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
 ACPI: SSDT 0x00000000DE55C9A0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
 ACPI: SSDT 0x00000000DE55CEE0 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
 ACPI: MCFG 0x00000000DE55DA58 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
 ACPI: HPET 0x00000000DE55DA98 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
 ACPI: SSDT 0x00000000DE55DAD0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
 ACPI: SSDT 0x00000000DE55DE40 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
 ACPI: ASF! 0x00000000DE5639A0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
 ACPI: DMAR 0x00000000DE563A48 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
 ACPI: SSDT 0x00000000DE563AC8 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
 ACPI: BGRT 0x00000000DE564048 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
 ACPI: Executed 15 blocks of module-level executable AML code
 ACPI: 7 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
 x2APIC available but disabled by DMAR table
 cpu0 at mainbus0 apid 0
 cpu0: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu0: package 0, core 0, smt 0
 cpu1 at mainbus0 apid 2
 cpu1: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu1: package 0, core 1, smt 0
 cpu2 at mainbus0 apid 4
 cpu2: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu2: package 0, core 2, smt 0
 cpu3 at mainbus0 apid 6
 cpu3: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu3: package 0, core 3, smt 0
 acpi0 at mainbus0: Intel ACPICA 20170303
 acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE80CC5AD808 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE8045E93808 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE8045D90308 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
 TPMX (PNP0C01) at acpi0 not configured
 FWHD (INT0800) at acpi0 not configured
 LDRC (PNP0C02) at acpi0 not configured
 LDR2 (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 CWDT (INT3F0D) at acpi0 not configured
 SIO1 (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPTE (PNP0400) at acpi0 not configured
 RMSC (PNP0C02) at acpi0 not configured
 acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
 acpiwmibus at acpiwmi0 not configured
 ACD0 (INT33CA) at acpi0 not configured
 PDRC (PNP0C02) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 acpiwmi1 at acpi0 (WMIO, PNP0C14-0): ACPI WMI Interface
 acpiwmibus at acpiwmi1 not configured
 PTMD (INT3394) at acpi0 not configured
 IAOE (INT33A0) at acpi0 not configured
 acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
 acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
 acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
 acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
 acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
 acpitz0 at acpi0 (TZ00)
 acpitz0: active cooling level 0: 80.0C
 acpitz0: active cooling level 1: 55.0C
 acpitz0: active cooling level 2: 50.0C
 acpitz0: active cooling level 3: 45.0C
 acpitz0: active cooling level 4: 40.0C
 acpitz0: levels: critical 105.0 C
 acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
 acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
 ACPI: Enabled 5 GPEs in block 00 to 3F
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c00 (rev. 0x06)
 ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
 ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 genfb0 at pci1 dev 0 function 0: vendor 10de product 1381 (rev. 0xa2)
 genfb0: framebuffer at 0xf1000000, size 800x600, depth 32, stride 3200
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at genfb0 not configured
 hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
 hdaudio0: interrupting at msi0 vec 0
 hdafg0 at hdaudio0: vendor 10de product 0060
 hdafg0: DP00 8ch: Digital Out [Jack]
 hdafg0: DP01 8ch: Digital Out [Jack]
 hdafg0: 8ch/0ch 48000Hz PCM16*
 xhci0 at pci0 dev 20 function 0: vendor 8086 product 8cb1 (rev. 0x00)
 xhci0: interrupting at msi1 vec 0
 xhci0: xHCI version 1.0
 usb0 at xhci0: USB revision 3.0
 usb1 at xhci0: USB revision 2.0
 vendor 8086 product 8cba (miscellaneous communications) at pci0 dev 22 function 0 not configured
 ehci0 at pci0 dev 26 function 0: vendor 8086 product 8cad (rev. 0x00)
 ehci0: interrupting at ioapic0 pin 16
 ehci0: EHCI version 1.0
 usb2 at ehci0: USB revision 2.0
 hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio1: interrupting at msi2 vec 0
 hdafg1 at hdaudio1: vendor 10ec product 0892
 hdafg1: DAC00 8ch: Speaker [Jack]
 hdafg1: DAC01 2ch: HP Out [Jack]
 hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
 hdafg1: ADC03 2ch: Mic In [Jack]
 hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg1: full duplex, playback, capture, mmap, independent
 hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
 hdafg1: Latency: 128 milliseconds
 spkr0 at audio0: PC Speaker (synthesized)
 ppb1 at pci0 dev 28 function 0: vendor 8086 product 8c90 (rev. 0xd0)
 ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 2: vendor 8086 product 8c94 (rev. 0xd0)
 ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 ppb2: link is x1 @ 2.5GT/s
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
 re0: interrupting at msi3 vec 0
 re0: Ethernet address 44:8a:5b:9d:e9:06
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 ppb3 at pci0 dev 28 function 3: vendor 8086 product 8c96 (rev. 0xd0)
 ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb4: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb5 at pci5 dev 1 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci6 at ppb5 bus 6
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb6 at pci5 dev 3 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci7 at ppb6 bus 7
 pci7: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb7 at pci5 dev 5 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci8 at ppb7 bus 8
 pci8: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb8 at pci5 dev 7 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci9 at ppb8 bus 9
 pci9: i/o space, memory space enabled, rd/line, wr/inv ok
 ehci1 at pci0 dev 29 function 0: vendor 8086 product 8ca6 (rev. 0x00)
 ehci1: interrupting at ioapic0 pin 23
 ehci1: EHCI version 1.0
 usb3 at ehci1: USB revision 2.0
 ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8cc6 (rev. 0x00)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 tco0 at ichlpcib0: TCO (watchdog) timer configured.
 tco0: Min/Max interval 1/367 seconds
 ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c82 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 19
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 2
 atabus2 at ahcisata0 channel 4
 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8ca2 (rev. 0x00)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pcppi0 at isa0 port 0x61
 spkr1 at pcppi0: PC Speaker
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 acpicpu0: C2: FFH, lat 148 us, pow   200 mW
 acpicpu0: P0: FFH, lat  10 us, pow 84000 mW, 3201 MHz, turbo boost
 acpicpu0: P1: FFH, lat  10 us, pow 84000 mW, 3200 MHz
 acpicpu0: P2: FFH, lat  10 us, pow 76349 mW, 3000 MHz
 acpicpu0: P3: FFH, lat  10 us, pow 73036 mW, 2900 MHz
 acpicpu0: P4: FFH, lat  10 us, pow 66595 mW, 2700 MHz
 acpicpu0: P5: FFH, lat  10 us, pow 60408 mW, 2500 MHz
 acpicpu0: P6: FFH, lat  10 us, pow 53689 mW, 2300 MHz
 acpicpu0: P7: FFH, lat  10 us, pow 50804 mW, 2200 MHz
 acpicpu0: P8: FFH, lat  10 us, pow 45218 mW, 2000 MHz
 acpicpu0: P9: FFH, lat  10 us, pow 39849 mW, 1800 MHz
 acpicpu0: P10: FFH, lat  10 us, pow 37248 mW, 1700 MHz
 acpicpu0: P11: FFH, lat  10 us, pow 31535 mW, 1500 MHz
 acpicpu0: P12: FFH, lat  10 us, pow 26734 mW, 1300 MHz
 acpicpu0: P13: FFH, lat  10 us, pow 22147 mW, 1100 MHz
 acpicpu0: P14: FFH, lat  10 us, pow 19936 mW, 1000 MHz
 acpicpu0: P15: FFH, lat  10 us, pow 15661 mW,  800 MHz
 coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu2 at cpu2: ACPI CPU
 coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu3 at cpu3: ACPI CPU
 coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 3200140800 Hz quality 3000
 uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
 uhub0: 6 ports with 6 removable, self powered
 uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
 uhub1: 14 ports with 14 removable, self powered
 IPsec: Initialized Security Association Processing.
 uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 6.0Gb/s
 ahcisata0 port 4: device present, speed: 1.5Gb/s
 wd0 at atabus0 drive 0
 wd0: <WDC WD3200AAJS-08B4A0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
 ugen0 at uhub1 port 1
 ugen0: D-Link (0x2001) 11n Adapter (0x3c15), rev 2.00/1.01, addr 1
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 wd1 at atabus1 drive 0
 wd1: <WDC WD10EZEX-21M2NA0>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 atapibus0 at atabus2: 1 targets
 cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH24NSC0, K26E89I4257, LK00> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 8009 (0x8009), class 9/0, rev 2.00/0.00, addr 2
 uhub4: single transaction translator
 uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8001 (0x8001), class 9/0, rev 2.00/0.00, addr 2
 uhub5: single transaction translator
 uhub4: 6 ports with 6 removable, self powered
 uhub5: 8 ports with 8 removable, self powered
 uhidev0 at uhub1 port 2 configuration 1 interface 0
 uhidev0: Genius (0x458) USB Optical Mouse (0xec), rev 1.10/1.00, addr 2, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0
 uhidev1 at uhub1 port 4 configuration 1 interface 0
 uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1702), rev 1.10/4.06, addr 3, iclass 3/1
 ukbd0 at uhidev1
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev2 at uhub1 port 4 configuration 1 interface 1
 uhidev2: vendor 04d9 (0x4d9) USB Keyboard (0x1702), rev 1.10/4.06, addr 3, iclass 3/0
 uhidev2: 2 report ids
 uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
 uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture, mmap
 pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
 pad0: Latency: 139 milliseconds
 spkr2 at audio1: PC Speaker (synthesized)
 WARNING: 1 error while detecting hardware; check system log.
 boot device: cd0
 root on cd0a dumps on cd0b
 root file system type: cd9660
 kern.module.path=/stand/amd64/8.0/modules
 wsmouse0: detached
 ums0: detached
 uhidev0: detached
 uhidev0: at uhub1 port 2 (addr 2) disconnected
 uhidev0 at uhub1 port 2 configuration 1 interface 0
 uhidev0: Genius (0x458) USB Optical Mouse (0xec), rev 1.10/1.00, addr 4, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0
 
 
 BIOS boot:
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
     2018 The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
 total memory = 8125 MB
 avail memory = 7866 MB
 WARNING: module error: module `cd9660' pushed by boot loader already exists
 cpu_rng: RDRAND
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 running cgd selftest aes-xts-256 aes-xts-512 done
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 MSI MS-7923 (1.0)
 mainbus0 (root)
 ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
 ACPI: XSDT 0x00000000DE549088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
 ACPI: FACP 0x00000000DE55BBD0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
 ACPI: DSDT 0x00000000DE5491A8 012A25 (v02 ALASKA A M I    00000006 INTL 20120711)
 ACPI: FACS 0x00000000DE580F80 000040
 ACPI: APIC 0x00000000DE55BCE0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
 ACPI: FPDT 0x00000000DE55BD58 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
 ACPI: SSDT 0x00000000DE55BDA0 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
 ACPI: SSDT 0x00000000DE55C990 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
 ACPI: SSDT 0x00000000DE55CED0 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
 ACPI: MCFG 0x00000000DE55DA48 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
 ACPI: HPET 0x00000000DE55DA88 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
 ACPI: SSDT 0x00000000DE55DAC0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
 ACPI: SSDT 0x00000000DE55DE30 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
 ACPI: ASF! 0x00000000DE563990 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
 ACPI: DMAR 0x00000000DE563A38 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
 ACPI: SSDT 0x00000000DE563AB8 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
 ACPI: Executed 15 blocks of module-level executable AML code
 ACPI: 7 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
 x2APIC available but disabled by DMAR table
 cpu0 at mainbus0 apid 0
 cpu0: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu0: package 0, core 0, smt 0
 cpu1 at mainbus0 apid 2
 cpu1: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu1: package 0, core 1, smt 0
 cpu2 at mainbus0 apid 4
 cpu2: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu2: package 0, core 2, smt 0
 cpu3 at mainbus0 apid 6
 cpu3: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz, id 0x306c3
 cpu3: package 0, core 3, smt 0
 acpi0 at mainbus0: Intel ACPICA 20170303
 acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
 acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE821BCF2808 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE810E897808 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE810E771308 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
 TPMX (PNP0C01) at acpi0 not configured
 FWHD (INT0800) at acpi0 not configured
 LDRC (PNP0C02) at acpi0 not configured
 LDR2 (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 CWDT (INT3F0D) at acpi0 not configured
 SIO1 (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPTE (PNP0400) at acpi0 not configured
 RMSC (PNP0C02) at acpi0 not configured
 acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
 acpiwmibus at acpiwmi0 not configured
 ACD0 (INT33CA) at acpi0 not configured
 PDRC (PNP0C02) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 acpiwmi1 at acpi0 (WMIO, PNP0C14-0): ACPI WMI Interface
 acpiwmibus at acpiwmi1 not configured
 PTMD (INT3394) at acpi0 not configured
 IAOE (INT33A0) at acpi0 not configured
 acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
 acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
 acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
 acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
 acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
 acpitz0 at acpi0 (TZ00)
 acpitz0: active cooling level 0: 80.0C
 acpitz0: active cooling level 1: 55.0C
 acpitz0: active cooling level 2: 50.0C
 acpitz0: active cooling level 3: 45.0C
 acpitz0: active cooling level 4: 40.0C
 acpitz0: levels: critical 105.0 C
 acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
 acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
 ACPI: Enabled 5 GPEs in block 00 to 3F
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c00 (rev. 0x06)
 ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
 ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: vendor 10de product 1381 (rev. 0xa2)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
 hdaudio0: interrupting at msi0 vec 0
 hdafg0 at hdaudio0: vendor 10de product 0060
 hdafg0: DP00 8ch: Digital Out [Jack]
 hdafg0: DP01 8ch: Digital Out [Jack]
 hdafg0: 8ch/0ch 48000Hz PCM16*
 xhci0 at pci0 dev 20 function 0: vendor 8086 product 8cb1 (rev. 0x00)
 xhci0: interrupting at msi1 vec 0
 xhci0: xHCI version 1.0
 usb0 at xhci0: USB revision 3.0
 usb1 at xhci0: USB revision 2.0
 vendor 8086 product 8cba (miscellaneous communications) at pci0 dev 22 function 0 not configured
 ehci0 at pci0 dev 26 function 0: vendor 8086 product 8cad (rev. 0x00)
 ehci0: interrupting at ioapic0 pin 16
 ehci0: EHCI version 1.0
 usb2 at ehci0: USB revision 2.0
 hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio1: interrupting at msi2 vec 0
 hdafg1 at hdaudio1: vendor 10ec product 0892
 hdafg1: DAC00 8ch: Speaker [Jack]
 hdafg1: DAC01 2ch: HP Out [Jack]
 hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
 hdafg1: ADC03 2ch: Mic In [Jack]
 hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg1: full duplex, playback, capture, mmap, independent
 hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
 hdafg1: Latency: 128 milliseconds
 spkr0 at audio0: PC Speaker (synthesized)
 ppb1 at pci0 dev 28 function 0: vendor 8086 product 8c90 (rev. 0xd0)
 ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 2: vendor 8086 product 8c94 (rev. 0xd0)
 ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 ppb2: link is x1 @ 2.5GT/s
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
 re0: interrupting at msi3 vec 0
 re0: Ethernet address 44:8a:5b:9d:e9:06
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 ppb3 at pci0 dev 28 function 3: vendor 8086 product 8c96 (rev. 0xd0)
 ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb4: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb5 at pci5 dev 1 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci6 at ppb5 bus 6
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb6 at pci5 dev 3 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci7 at ppb6 bus 7
 pci7: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb7 at pci5 dev 5 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb7: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci8 at ppb7 bus 8
 pci8: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb8 at pci5 dev 7 function 0: vendor 1b21 product 1184 (rev. 0x00)
 ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s
 pci9 at ppb8 bus 9
 pci9: i/o space, memory space enabled, rd/line, wr/inv ok
 ehci1 at pci0 dev 29 function 0: vendor 8086 product 8ca6 (rev. 0x00)
 ehci1: interrupting at ioapic0 pin 23
 ehci1: EHCI version 1.0
 usb3 at ehci1: USB revision 2.0
 ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8cc6 (rev. 0x00)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 tco0 at ichlpcib0: TCO (watchdog) timer configured.
 tco0: Min/Max interval 1/367 seconds
 ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c82 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 19
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 2
 atabus2 at ahcisata0 channel 4
 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8ca2 (rev. 0x00)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pcppi0 at isa0 port 0x61
 spkr1 at pcppi0: PC Speaker
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 acpicpu0: C2: FFH, lat 148 us, pow   200 mW
 acpicpu0: P0: FFH, lat  10 us, pow 84000 mW, 3201 MHz, turbo boost
 acpicpu0: P1: FFH, lat  10 us, pow 84000 mW, 3200 MHz
 acpicpu0: P2: FFH, lat  10 us, pow 76349 mW, 3000 MHz
 acpicpu0: P3: FFH, lat  10 us, pow 73036 mW, 2900 MHz
 acpicpu0: P4: FFH, lat  10 us, pow 66595 mW, 2700 MHz
 acpicpu0: P5: FFH, lat  10 us, pow 60408 mW, 2500 MHz
 acpicpu0: P6: FFH, lat  10 us, pow 53689 mW, 2300 MHz
 acpicpu0: P7: FFH, lat  10 us, pow 50804 mW, 2200 MHz
 acpicpu0: P8: FFH, lat  10 us, pow 45218 mW, 2000 MHz
 acpicpu0: P9: FFH, lat  10 us, pow 39849 mW, 1800 MHz
 acpicpu0: P10: FFH, lat  10 us, pow 37248 mW, 1700 MHz
 acpicpu0: P11: FFH, lat  10 us, pow 31535 mW, 1500 MHz
 acpicpu0: P12: FFH, lat  10 us, pow 26734 mW, 1300 MHz
 acpicpu0: P13: FFH, lat  10 us, pow 22147 mW, 1100 MHz
 acpicpu0: P14: FFH, lat  10 us, pow 19936 mW, 1000 MHz
 acpicpu0: P15: FFH, lat  10 us, pow 15661 mW,  800 MHz
 coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu2 at cpu2: ACPI CPU
 coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
 acpicpu3 at cpu3: ACPI CPU
 coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 3200170080 Hz quality 3000
 uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
 uhub0: 6 ports with 6 removable, self powered
 uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
 uhub1: 14 ports with 14 removable, self powered
 IPsec: Initialized Security Association Processing.
 uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 6.0Gb/s
 ahcisata0 port 4: device present, speed: 1.5Gb/s
 wd0 at atabus0 drive 0
 wd0: <WDC WD3200AAJS-08B4A0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
 ugen0 at uhub1 port 1
 ugen0: D-Link (0x2001) 11n Adapter (0x3c15), rev 2.00/1.01, addr 1
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 wd1 at atabus1 drive 0
 wd1: <WDC WD10EZEX-21M2NA0>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 atapibus0 at atabus2: 1 targets
 cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH24NSC0, K26E89I4257, LK00> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 8001 (0x8001), class 9/0, rev 2.00/0.00, addr 2
 uhub4: single transaction translator
 uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 8009 (0x8009), class 9/0, rev 2.00/0.00, addr 2
 uhub5: single transaction translator
 uhub5: 6 ports with 6 removable, self powered
 uhub4: 8 ports with 8 removable, self powered
 uhidev0 at uhub1 port 2 configuration 1 interface 0
 uhidev0: Genius (0x458) USB Optical Mouse (0xec), rev 1.10/1.00, addr 2, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0
 uhidev1 at uhub1 port 4 configuration 1 interface 0
 uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1702), rev 1.10/4.06, addr 3, iclass 3/1
 ukbd0 at uhidev1
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev2 at uhub1 port 4 configuration 1 interface 1
 uhidev2: vendor 04d9 (0x4d9) USB Keyboard (0x1702), rev 1.10/4.06, addr 3, iclass 3/0
 uhidev2: 2 report ids
 uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
 uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture, mmap
 pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
 pad0: Latency: 139 milliseconds
 spkr2 at audio1: PC Speaker (synthesized)
 WARNING: 1 error while detecting hardware; check system log.
 boot device: cd0
 root on cd0a dumps on cd0b
 root file system type: cd9660
 kern.module.path=/stand/amd64/8.0/modules
 wsmouse0: detached
 ums0: detached
 uhidev0: detached
 uhidev0: at uhub1 port 2 (addr 2) disconnected
 uhidev0 at uhub1 port 2 configuration 1 interface 0
 uhidev0: Genius (0x458) USB Optical Mouse (0xec), rev 1.10/1.00, addr 4, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0
 


Home | Main Index | Thread Index | Old Index