NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/53179: KASSERT panic in ata_read_log_ext_ncq()
>Number: 53179
>Category: kern
>Synopsis: KASSERT panic in ata_read_log_ext_ncq()
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Apr 13 06:55:00 +0000 2018
>Originator: msaitoh%five.execsw.org@localhost
>Release: NetBSD 8.99.14
>Organization:
>Environment:
Architecture: x86_64
Machine: amd64
>Description:
Today, I update my old machine to the latest -current.
It panics while doing cvs update.
[ 14.349830694] panic: kernel diagnostic assertion "(*status & WDCS_ERR)" failed: file "../../../../dev/ata/ata.c", line 993 wd0: non-error command slot 0 reported by READ LOG EXT page 10: err 0 status 0
[ 14.377418419]
[ 14.377418419] cpu0: Begin traceback...
[ 14.383675808] vpanic() at netbsd:vpanic+0x16f
[ 14.383675808] ch_voltag_convert_in() at netbsd:ch_voltag_convert_in
[ 14.392997222] ata_read_log_ext_ncq() at netbsd:ata_read_log_ext_ncq+0x27e
[ 14.400364333] ahci_channel_recover() at netbsd:ahci_channel_recover+0xa7
[ 14.410326598] ahci_intr() at netbsd:ahci_intr+0xa5
[ 14.410326598] intr_biglock_wrapper() at netbsd:intr_biglock_wrapper+0x36
[ 14.420478229] Xhandle_ioapic_level2() at netbsd:Xhandle_ioapic_level2+0x6a
[ 14.430794528] --- interrupt ---
[ 14.430794528] x86_mwait() at netbsd:x86_mwait+0xd
[ 14.440069074] acpicpu_cstate_idle_enter() at netbsd:acpicpu_cstate_idle_enter+0xdb
[ 14.440069074] acpicpu_cstate_idle() at netbsd:acpicpu_cstate_idle+0xb6
[ 14.452309948] idle_loop() at netbsd:idle_loop+0x1a5
[ 14.460704396] cpu0: End traceback...
[ 14.460704396] fatal breakpoint trap in supervisor mode
[ 14.470957213] trap type 1 code 0 rip 0xffffffff8021eb75 cs 0x8 rflags 0x202 cr2 0x787c63748020 ilevel 0x6 rsp 0xffff8000ac897c68
[ 14.482984351] curlwp 0xffffe4023ee1f840 pid 0.2 lowest kstack 0xffff8000ac8942c0
Stopped in pid 0.2 (system) at netbsd:breakpoint+0x5: leave
---------- dmesg -------------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.14 (GENERIC) #15: Fri Apr 13 13:49:44 JST 2018
msaitoh%glk.execsw.org@localhost:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 8072 MB
avail memory = 7814 MB
Random seed data path=/var/db/entropy-file len=536 pa=18d0000
cpu_rng: RDSEED
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0xbd<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: missing or invalid systbl
SMBIOS rev. 2.7 @ 0xb9a22000 (75 entries)
HP HP EliteDesk 800 G2 SFF ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000FBE30 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000B9EFD0E8 0000BC (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x00000000B9EEF000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x00000000B9ECC000 01F48C (v02 HPQOEM 8054 00000000 INTL 20121018)
ACPI: FACS 0x00000000B9E5B000 000040
ACPI: SSDT 0x00000000B9EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
ACPI: TCPA 0x00000000B9EFB000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000B9EFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
ACPI: UEFI 0x00000000B9E6A000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000B9EF4000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x00000000B9EF3000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
ACPI: MSDM 0x00000000B9EF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: SLIC 0x00000000B9EF1000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001)
ACPI: WSMT 0x00000000B9EF0000 000028 (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: HPET 0x00000000B9EEE000 000038 (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: APIC 0x00000000B9EED000 0000BC (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: MCFG 0x00000000B9EEC000 00003C (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: SSDT 0x00000000B9ECB000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
ACPI: SSDT 0x00000000B9ECA000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
ACPI: SSDT 0x00000000B9EC9000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
ACPI: ASF! 0x00000000B9EC8000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x00000000B9EC7000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x00000000B9EC6000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: 16 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 24 MHz
timecounter: Timecounter "lapic" frequency 24040485 Hz quality -100
cpu0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu0: package 0, core 0, smt 0
cpu0: PAT enabled
cpu1 at mainbus0 apid 2
cpu1: 2 page colors
i82489_ipi_init: ESR 00000040
cpu1: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu1: package 0, core 1, smt 0
cpu1: PAT enabled
cpu2 at mainbus0 apid 4
cpu2: 2 page colors
cpu2: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu2: package 0, core 2, smt 0
cpu2: PAT enabled
cpu3 at mainbus0 apid 6
cpu3: 2 page colors
cpu3: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu3: package 0, core 3, smt 0
cpu3: PAT enabled
acpi0 at mainbus0: Intel ACPICA 20180313
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,00000000>, AslId < ,01000013>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
MCFG: MEMMAP: 0x0000000000000000-0x000000000009dbff, size=0x000000000009dc00, type=1(Memory)
MCFG: MEMMAP: 0x000000000009dc00-0x000000000009ffff, size=0x0000000000002400, type=2(Reserved)
MCFG: MEMMAP: 0x00000000000e0000-0x00000000000fffff, size=0x0000000000020000, type=2(Reserved)
MCFG: MEMMAP: 0x0000000000100000-0x00000000b90fafff, size=0x00000000b8ffb000, type=1(Memory)
MCFG: MEMMAP: 0x00000000b90fb000-0x00000000b9c7efff, size=0x0000000000b84000, type=2(Reserved)
MCFG: MEMMAP: 0x00000000b9c7f000-0x00000000b9e7efff, size=0x0000000000200000, type=4(NVS)
MCFG: MEMMAP: 0x00000000b9e7f000-0x00000000b9efefff, size=0x0000000000080000, type=3(ACPI)
MCFG: MEMMAP: 0x00000000b9eff000-0x00000000b9efffff, size=0x0000000000001000, type=1(Memory)
MCFG: MEMMAP: 0x00000000b9f00000-0x00000000be7fffff, size=0x0000000004900000, type=2(Reserved)
MCFG: MEMMAP: 0x00000000f8000000-0x00000000fbffffff, size=0x0000000004000000, type=2(Reserved)
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4023D57E410 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4023D58D810 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4023D58D010 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4010E677A50 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpi0: ACPI-Fast 24-bit timer
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
acpiec1 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpiwmi0 at acpi0 (WMIB, PNP0C14-1): ACPI WMI Interface
acpiwmi0: {988D08E3-68F4-4C35-AF3E-6A1B8106F83C} oid 5453 count 2B flags 00
acpiwmi0: {8232DE3D-663D-4327-A8F4-E293ADB9BF05} oid 4E49 count 05 flags 00
acpiwmi0: {2D114B49-2DFB-4130-B8FE-4A3C09E75133} oid 4E45 count 8C flags 00
acpiwmi0: {14EA9746-CE1F-4098-A0E0-7045CB4DA745} oid 4C4F count 02 flags 00
acpiwmi0: {322F2028-0F84-4901-988E-015176049E2D} oid 5750 count 02 flags 00
acpiwmi0: {DF4E63B6-3BBC-4858-9737-C74F82F821F3} oid 5542 count 00 flags 00
acpiwmi0: {41227C2D-80E1-423F-8B8E-87E32755A0EB} oid 4550 count 02 flags 00
acpiwmi0: {8F1F6436-9F42-42C8-BADC-0E9424F20C9A} oid 5353 count 00 flags 00
acpiwmi0: {1F4C91EB-DC5C-460B-951D-C7CB9B4B8D5E} oid 5342 count 01 flags 02
acpiwmi0: {7391A661-223A-47DB-A77A-7BE84C60822D} oid 4955 count 01 flags 02
acpiwmi0: {2B814318-4BE8-4707-9D84-A190A859B5D0} oid 0080 count 01 flags 08
acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 5A5A count 01 flags 00
acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMIV, PNP0C14-2): ACPI WMI Interface
acpiwmi1: {5FB7F034-2C63-45E9-BE91-3D44E2C707E4} oid 5650 count 01 flags 02
acpiwmi1: {95F24279-4D7B-4334-9387-ACCDC67EF61C} oid 0081 count 01 flags 08
acpiwmi1: {05901221-D566-11D1-B2F0-00A0C9062910} oid 5A5A count 01 flags 00
acpiwmi1: failed to enable expensive WExx: AE_NOT_FOUND
wmihp0 at acpiwmi1: HP WMI mappings
ACPI Error: Attempt to CreateField of length zero (20180313/dsopcode-182)
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180313/psparse-569)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180313/psparse-569)
wmihp0: failed to evaluate method (cmd = 0x05): AE_AML_OPERAND_VALUE
ACPI Error: Attempt to CreateField of length zero (20180313/dsopcode-182)
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180313/psparse-569)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180313/psparse-569)
wmihp0: failed to evaluate method (cmd = 0x02): AE_AML_OPERAND_VALUE
ACPI Error: Attempt to CreateField of length zero (20180313/dsopcode-182)
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180313/psparse-569)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180313/psparse-569)
wmihp0: failed to evaluate method (cmd = 0x01): AE_AML_OPERAND_VALUE
ACPI Error: Attempt to CreateField of length zero (20180313/dsopcode-182)
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180313/psparse-569)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180313/psparse-569)
wmihp0: failed to evaluate method (cmd = 0x04): AE_AML_OPERAND_VALUE
wmihp0: failed to initialize sysmon
ACPI Error: Attempt to CreateField of length zero (20180313/dsopcode-182)
ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180313/psparse-569)
ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180313/psparse-569)
wmihp0: failed to evaluate method (cmd = 0x03): AE_AML_OPERAND_VALUE
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpivga0: capabilities: _DOS _DOD
acpiout0 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device
acpiout0: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1: capabilities: _DCS _DGS _DSS
acpiout2 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2: capabilities: _DCS _DGS _DSS
acpiout3 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3: capabilities: _DCS _DGS _DSS
acpiout4 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4: capabilities: _DCS _DGS _DSS
acpiout5 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5: capabilities: _DCS _DGS _DSS
acpiout6 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6: capabilities: _DCS _DGS _DSS
acpiout7 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7: capabilities: _DCS _DGS _DSS
acpiout8 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8: capabilities: _DCS _DGS _DSS
acpiout9 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9: capabilities: _DCS _DGS _DSS
acpiout10 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10: capabilities: _DCS _DGS _DSS
acpiout11 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11: capabilities: _DCS _DGS _DSS
acpiout12 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12: capabilities: _DCS _DGS _DSS
acpiout13 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13: capabilities: _DCS _DGS _DSS
acpiout14 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14: capabilities: _DCS _DGS _DSS
acpiout15 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15: capabilities: _DCS _DGS _DSS
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpiout16: capabilities:
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout15
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
PRRE (PNP0C02) at acpi0 not configured
IOTR (PNP0C02) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
NSHM (PNP0C02) at acpi0 not configured
CIO2 (INT343E) at acpi0 not configured
TERM (INT343D) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
HTAM (PNP0C02) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiwmi2 at acpi0 (WMIS, PNP0C14-3): ACPI WMI Interface
acpiwmi2: {8F1F6435-9F42-42C8-BADC-0E9424F20C9A} oid 4541 count 06 flags 00
acpiwmi2: {2B814318-4BE8-4707-9D84-A190A859B5D0} oid 00A0 count 01 flags 08
acpiwmi2: {41227C2D-80E1-423F-8B8E-87E32755A0EB} oid 4342 count 08 flags 00
acpiwmi2: {05901221-D566-11D1-B2F0-00A0C9062910} oid 5A5A count 01 flags 00
acpiwmi2: failed to enable expensive WExx: AE_NOT_FOUND
acpiwmibus at acpiwmi2 not configured
EPC (INT0E0C) at acpi0 not configured
BTKL (INT3420) at acpi0 not configured
PAGD (ACPI000C) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
SKC0 (INT3470) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
CHUB (INT339B) at acpi0 not configured
ACPI: Enabled 3 GPEs in block 00 to 7F
pckbdprobe: reset error 5
pmsprobe: reset error 5
pci0 at mainbus0 bus 0: configuration mode 1
acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x2001001b)
acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0xa12f8086, alias=true)
acpi0: MCFG: 000:20:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:22:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:22:3: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:23:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:28:0: Ok (cfg[0x100]=0x14010001)
acpi0: MCFG: 000:28:6: Ok (cfg[0x100]=0x14010001)
acpi0: MCFG: 000:29:0: Ok (cfg[0x100]=0x14010001)
acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:31:4: invalid config space (cfg[0x100]=0xa1238086, alias=true)
acpi0: MCFG: 000:31:6: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: bus 0: valid devices
acpi0: MCFG: 000:02:0
acpi0: MCFG: 000:28:0
acpi0: MCFG: 000:28:6
acpi0: MCFG: 000:29:0
acpi0: acpimcfg_map_bus done
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 191f (rev. 0x07)
vga0 at pci0 dev 2 function 0: vendor 8086 product 1912 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product a12f (rev. 0x31)
allocated pic msi0 type edge pin 0 level 6 to cpu0 slot 16 idt entry 97
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
xhci0: hcs1=1a000840 hcs2=14200054 hcs3=200000a
xhci0: hcc=0x200077c1<XECP=0x2000,MAXPSA=0x7,SEC,SPC,PAE,NSS,LTC,AC64>
xhci0: xECP 8000
xhci0: ECR: 0x02000802
xhci0: SP: 02000802 20425355 30111001 00000000
xhci0: hs ports 1 - 16
xhci0: ECR: 0x03001402
xhci0: SP: 03001402 20425355 30000a11 00000000
xhci0: ss ports 17 - 26
xhci0: ECR: 0x004dffc0
xhci0: ECR: 0x00012201
xhci0: waiting for BIOS to give up control
xhci0: ECR: 0x000003c6
xhci0: ECR: 0x002740c7
xhci0: ECR: 0x000040c2
xhci0: ECR: 0x0005100a
xhci0: ECR: 0x000030c3
xhci0: ECR: 0x000040c4
xhci0: ECR: 0x000000c5
xhci0: PAGESIZE 0x00000001
xhci0: sc_pgsz 0x00001000
xhci0: sc_maxslots 0x00000040
xhci0: sc_maxports 26
xhci0: sc_maxspbuf 34
xhci0: eventst: 000000010e805fc0 0xffff8000acc33fc0 1000
xhci0: dcbaa: 000000010e806000 0xffff8000acc34000 1000
xhci0: current IMOD 1000
xhci0: USBCMD 00000005
xhci0: USB3PRM / USB3.0 configurable ports: 0x00000000
xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x00000104
xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x00000018
xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x00000003
usb0 at xhci0: USB revision 3.0
usb0: WARNING: power management not supported
usb1 at xhci0: USB revision 2.0
usb1: WARNING: power management not supported
vendor 8086 product a131 (miscellaneous DASP, revision 0x31) at pci0 dev 20 function 2 not configured
vendor 8086 product a13a (miscellaneous communications, revision 0x31) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 100 Series KT (com)
com2 at puc0 port 0 (16550-compatible): allocated pic ioapic0 type level pin 19 level 8 to cpu0 slot 1 idt entry 129
ioaddr 0x3080, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a102 (rev. 0x31)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 98
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 5 ports, 32 slots, CAP 0xef34ff44<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 5
ppb0 at pci0 dev 28 function 0: vendor 8086 product a115 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
pci1 at ppb0 bus 1
acpi0: MCFG: bus 1: no valid devices.
acpi0: acpimcfg_map_bus done
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 28 function 6: vendor 8086 product a116 (rev. 0xf1)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
pci2 at ppb1 bus 2
acpi0: MCFG: bus 2: no valid devices.
acpi0: acpimcfg_map_bus done
pci2: i/o space, memory space enabled
ppb2 at pci0 dev 29 function 0: vendor 8086 product a118 (rev. 0xf1)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci3 at ppb2 bus 3
acpi0: MCFG: bus 3: no valid devices.
acpi0: acpimcfg_map_bus done
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 8086 product a146 (rev. 0x31)
vendor 8086 product a121 (miscellaneous memory, revision 0x31) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
allocated pic msi1 type edge pin 0 level 7 to cpu0 slot 17 idt entry 112
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0 vendor 0x10EC product 0x0221 nid 0x01: vendor 10ec product 0221
hdafg0: DAC00 2ch: Speaker [Built-In]
nid=17 [pin: Speaker (Built-In)]
nid=0F [audio mixer] [source: dac, record]
nid=02 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack]
nid=14 [pin: Speaker (Green Jack)]
nid=0D [audio mixer] [source: dac, record]
nid=03 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
nid=21 [pin: HP Out (Black Jack)]
nid=0D [audio mixer] [source: dac, record]
nid=03 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
nid=1A [pin: Mic In (Black Jack)]
nid=1B [pin: Line In (Blue Jack)]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0 vendor 0x8086 product 0x2809 nid 0x01: vendor 8086 product 2809
hdafg1: DP00 8ch: Digital Out [Jack]
nid=03 [pin: Digital Out (Jack)]
nid=02 [audio output] [source: dac]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a123 (rev. 0x31)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 2 idt entry 98
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50: M378A1G43DB0-CPB
spdmem0: DDR4 SDRAM (DDR4 UDIMM), no ECC, no temp-sensor, 8GB, 2132MHz (PC4-17100)
spdmem0: 12 rows, 13 cols, 4 banks, 4 bank groups, 0.938ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 15-15-15-36
spdmem0: 0x00: 23 10 0c 02 84 19 00 08 00 40 00 03 09 03 00 00
spdmem0: 0x10: 00 00 08 0c f8 03 00 00 6e 6e 6e 11 08 76 20 08
spdmem0: 0x20: 00 05 70 03 00 a8 1e 2b 2e 00 00 00 00 00 00 00
spdmem0: 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 16 36 16 36
spdmem0: 0x40: 16 36 16 36 00 00 2b 0c 2b 0c 2b 0c 2b 0c 00 00
spdmem0: 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x70: 00 00 00 00 00 83 b5 ce 00 00 00 00 00 c2 9d b1
spdmem0: 0x80: 11 11 01 01 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0xf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 de 27
spdmem0: 0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spdmem0: 0x140: 80 ce 02 15 40 92 11 5e 63 4d 33 37 38 41 31 47
spdmem0: 0x150: 34 33 44 42 30 2d 43 50 42 20 20 20 20 00 80 ce
spdmem0: 0x160: 00 55 30 50 36 30 30 30 92 00 01 00 00 00 00 00
spdmem0: 0x170: 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x31)
allocated pic msi2 type edge pin 0 level 6 to cpu0 slot 18 idt entry 99
wm0: interrupting at msi2 vec 0
wm0: PCI-Express bus
wm0: 4096 words FLASH
wm0: Ethernet address 40:b0:34:3e:81:b3
wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x001b15d1 rev 0x10
allocated pic ioapic0 type edge pin 7 level 6 to cpu0 slot 3 idt entry 100
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 4 idt entry 130
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
wbsio_probe: id 0x1e, rev 0x11
attimer1: attached to pcppi0
cpu0: unknown i686 model 5e, can't get bus clock (0x0)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 151 us, pow 200 mW
acpicpu0: C3: FFH, lat 256 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3201 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 3200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 3000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 56516 mW, 2900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 51532 mW, 2700 MHz
acpicpu0: P5: FFH, lat 10 us, pow 46744 mW, 2500 MHz
acpicpu0: P6: FFH, lat 10 us, pow 41545 mW, 2300 MHz
acpicpu0: P7: FFH, lat 10 us, pow 39313 mW, 2200 MHz
acpicpu0: P8: FFH, lat 10 us, pow 34990 mW, 2000 MHz
acpicpu0: P9: FFH, lat 10 us, pow 30835 mW, 1800 MHz
acpicpu0: P10: FFH, lat 10 us, pow 28823 mW, 1700 MHz
acpicpu0: P11: FFH, lat 10 us, pow 24402 mW, 1500 MHz
acpicpu0: P12: FFH, lat 10 us, pow 20687 mW, 1300 MHz
acpicpu0: P13: FFH, lat 10 us, pow 17137 mW, 1100 MHz
acpicpu0: P14: FFH, lat 10 us, pow 15427 mW, 1000 MHz
acpicpu0: P15: FFH, lat 10 us, pow 12119 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu0: id 1, lapic id 0, cap 0x0bfd, flags 0x001ae297
acpicpu0: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
acpicpu1: id 2, lapic id 2, cap 0x0bfd, flags 0x001ae297
acpicpu1: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu2: id 3, lapic id 4, cap 0x0bfd, flags 0x001ae297
acpicpu2: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
acpicpu3: id 4, lapic id 6, cap 0x0bfd, flags 0x001ae297
acpicpu3: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
Initializing SSP: 6c0599cbe807281a 899da6b49b3ad7f7 edee4e360a76fdde c5ca2aed15a5b738 df92f582bc233732 4158ae29120a7c8f 452533e6172e2952 a0df324a6ec7f8f7
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: TSC skew=0 drift=0
cpu2: TSC skew=6 drift=-12
cpu3: TSC skew=-6 drift=5
cpu1: running
cpu2: running
cpu3: running
timecounter: Timecounter "TSC" frequency 3192946240 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI Root Hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 16 ports with 16 removable, self powered
acpicpu3: ACPI CPUs started
IPsec: Initialized Security Association Processing.
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 2: PHY offline
ahcisata0 port 5: PHY offline
ahcisata0 port 3: PHY offline
wd0 at atabus0 drive 0
wd0: <INTEL SSDSC2KW120H6>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <SanDisk SD7SB3Q-256G-1006>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd1: GPT GUID: 12b4366c-70c0-475c-bab5-10aa0eb850be
dk0 at wd1: "EFI system partition", 737280 blocks at 2048, type: msdos
dk1 at wd1: "Microsoft reserved partition", 262144 blocks at 739328, type: <unknown>
dk2 at wd1: "Basic data partition", 456064534 blocks at 1001472, type: <unknown>
dk3 at wd1: "15941ed7-2738-4d18-a03d-618eff94e977", 1832960 blocks at 457066496, type: <unknown>
dk4 at wd1: "7eeaf340-a5aa-4e12-96d2-63ca662f5535", 20246528 blocks at 479870976, type: <unknown>
wd1: wedge named 'Basic data partition' already existed, using '7eeaf340-a5aa-4e12-96d2-63ca662f5535'
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
Searching for RAID components...
WARNING: 21 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.14/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
elite#
------- atactl output -------------
elite# atactl wd0 identify
Model: INTEL SSDSC2KW120H6, Rev: LSBG200, Serial #: CVLT615104LC120GGN
World Wide Name: 55CD2E414CB8CD67
Device type: ATA, fixed
Capacity 120 Gbytes, 234441648 sectors, 512 bytes/sector
Cylinders: 16383, heads: 16, sec/track: 63
Command queue depth: 32
Device capabilities:
DMA
LBA
ATA standby timer values
IORDY operation
IORDY disabling
Device supports following standards:
ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7 ATA-8
Command set support:
NOP command (enabled)
READ BUFFER command (enabled)
WRITE BUFFER command (enabled)
Host Protected Area feature set (enabled)
Look-ahead (enabled)
Write cache (enabled)
Power Management feature set (enabled)
Security Mode feature set (disabled)
SMART feature set (enabled)
FLUSH CACHE EXT command (enabled)
FLUSH CACHE command (enabled)
48-bit Address feature set (enabled)
Advanced Power Management feature set (enabled)
DOWNLOAD MICROCODE command (enabled)
World Wide Name
WRITE DMA/MULTIPLE FUA EXT commands
General Purpose Logging feature set
SMART self-test
SMART error logging
Serial ATA capabilities:
1.5Gb/s signaling
3.0Gb/s signaling
6.0Gb/s signaling
Native Command Queuing
Host-Initiated Interface Power Management
PHY Event Counters
Serial ATA features:
DMA Setup Auto Activate (disabled)
Device-Initiated Interface Power Managment (disabled)
Software Settings Preservation (enabled)
TRIM supported
>How-To-Repeat:
Do cvs update on this machine.
>Fix:
I don't know.
Home |
Main Index |
Thread Index |
Old Index