Re: port-i386/52266: Double fault early in boot with Transmeta Crusoe CPU

[Andreas Gustafsson <gson%gson.org@localhost>]

The following reply was made to PR port-i386/52266; it has been noted by GNATS.

From: Andreas Gustafsson <gson%gson.org@localhost>
To: nonaka%NetBSD.org@localhost
Cc: gnats-bugs%NetBSD.org@localhost
Subject: Re: port-i386/52266: Double fault early in boot with Transmeta Crusoe CPU
Date: Thu, 1 Jun 2017 09:27:57 +0300

 Kimihiro Nonaka wrote:
 >  Could you send a dmesg and a result of cpuctl identify 0 with old kernel?
 
 dmesg:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.1.5 (GUNNEL) #0: Fri Jun 12 15:45:43 EEST 2015
 	gson%guido.araneus.fi@localhost:/bracket/prod/6.1.5-edis/i386/obj/sys/arch/i386/compile/GUNNEL
 total memory = 175 MB
 avail memory = 159 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 NEC                              VUS6BCE-00B-000 (                                )
 mainbus0 (root)
 cpu0 at mainbus0: Transmeta(tm) Crusoe(tm) Processor TMTM5600, id 0x543
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <NEC   ,ND000034,06040005>, AslId < LTP,00000000>
 LNK1: ACPI: Found matching pin for 0.3.INTA at func 0: 255
 LNK2: ACPI: Found matching pin for 0.4.INTA at func 0: 11
 LNK3: ACPI: Found matching pin for 0.5.INTA at func 0: 10
 LNK1: ACPI: Found matching pin for 0.6.INTA at func 0: 9
 LNKU: ACPI: Found matching pin for 0.20.INTA at func 0: 5
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
 npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
 npx1: reported by CPUID; using exception 16
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 USKB (PNP0303) at acpi0 not configured
 SYSR (PNP0C02) at acpi0 not configured
 acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 acpiacad0 at acpi0 (ADP, ACPI0003): ACPI AC Adapter
 acpibat0 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
 acpifan0 at acpi0 (LRA0, PNP0C0B): ACPI Fan
 acpitz0 at acpi0 (THRM)
 acpitz0: levels: critical 100.0 C, passive cooling
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x1279 product 0x0395 (rev. 0x00)
 vendor 0x1279 product 0x0396 (RAM memory) at pci0 dev 0 function 1 not configured
 vendor 0x1279 product 0x0397 (RAM memory) at pci0 dev 0 function 2 not configured
 cbb0 at pci0 dev 3 function 0: vendor 0x104c product 0xac50 (rev. 0x01)
 eso0 at pci0 dev 4 function 0: ESS Solo-1 PCI AudioDrive ES1946 Revision E
 eso0: interrupting at irq 11
 eso0: mapping Audio 1 DMA using VC I/O space at 0x1480
 audio0 at eso0: full duplex, playback, capture, mmap, independent
 opl0 at eso0: model OPL3
 midi1 at opl0: ESO Yamaha OPL3
 mpu0 at eso0
 midi2 at mpu0: ESO MPU-401 MIDI UART
 joy0 at eso0
 joy0: joystick not connected
 vga1 at pci0 dev 5 function 0: vendor 0x1002 product 0x4c52 (rev. 0x64)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 mach64drm0 at vga1: Rage Mobility P/M
 mach64drm0: Initialized mach64 2.0.0 20060718
 fxp0 at pci0 dev 6 function 0: i82559S Ethernet (rev. 0x09)
 fxp0: interrupting at irq 9
 fxp0: May need receiver lock-up workaround
 fxp0: Ethernet address 00:10:a4:16:62:84
 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 vendor 0x115d product 0x002b (serial communications, interface 0x02) at pci0 dev 6 function 1 not configured
 pcib0 at pci0 dev 7 function 0: vendor 0x10b9 product 0x1533 (rev. 0x00)
 aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 aceride0: bus-master DMA support present
 aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
 aceride0: primary channel wired to compatibility mode
 aceride0: primary channel interrupting at irq 14
 atabus0 at aceride0 channel 0
 aceride0: secondary channel wired to compatibility mode
 aceride0: secondary channel interrupting at irq 15
 atabus1 at aceride0 channel 1
 alipm0 at pci0 dev 17 function 0: 74KHz clock
 iic0 at alipm0: I2C bus
 ohci0 at pci0 dev 20 function 0: vendor 0x10b9 product 0x5237 (rev. 0x03)
 ohci0: interrupting at irq 5
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 cbb0: cacheline 0x8 lattimer 0x51
 cbb0: bhlc 0x25108
 cbb0: interrupting at irq 9
 cardslot0 at cbb0
 cardbus0 at cardslot0: bus 1
 pcmcia0 at cardslot0
 isa0 at pcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: C2: I/O, lat  10 us, pow     0 mW
 acpicpu0: C3: I/O, lat  32 us, pow     0 mW
 acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 acpiacad0: AC adapter online.
 uhub0 at usb0: vendor 0x10b9 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version 01.01, >
 wi0: 802.11 address 00:60:1d:f2:27:87
 wi0: using Lucent Technologies, WaveLAN/IEEE
 wi0: Lucent Firmware: Station (4.52.1)
 wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 wd0 at atabus0 drive 0
 wd0: <IC25N020ATCS04-0>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 19077 MB, 41344 cyl, 15 head, 63 sec, 512 bytes/sect x 39070080 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
 Kernelized RAIDframe activated
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 acpibat0: normal capacity on 'charge state'
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 Output from "cpuctl identify 0":
 
 cpu0: Transmeta Crusoe (586-class), 592.78 MHz, id 0x543
 cpu0: Processor revision 1.3.1.3
 cpu0: Code Morphing Software Rev: 4.1.4-7-51
 cpu0: 20000805 23:30 official release 4.1.4#2
 cpu0: LongRun <600MHz 1600mV 100%>
 cpu0: features  0x84803f<FPU,VME,DE,PSE,TSC,MSR,CMOV,PN,MMX>
 cpu0: "Transmeta(tm) Crusoe(tm) Processor TMTM5600"
 cpu0: serial number 0000-0543-0000-0F29-0A21-475A
 cpu0: Initial APIC ID 0
 cpu0: family 05 model 04 extfamily 00 extmodel 00 stepping 03
 cpu0: UCode version: ?
 
 -- 
 Andreas Gustafsson, gson%gson.org@localhost