NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/51341: devices didn't attach in sane order after resume, got panic



>Number:         51341
>Category:       kern
>Synopsis:       devices didn't attach in sane order after resume, got panic
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Jul 16 18:05:01 +0000 2016
>Originator:     coypu
>Release:        NetBSD-7.99.34
>Organization:
>Environment:
NetBSD  7.99.34 NetBSD 7.99.34 (GENERIC) #9: Sat Jul 16 20:15:13 IDT 2016  fly@:/usr/obj-amd64/sys/arch/amd64/compile/GENERIC amd64
>Description:
Suspend laptop with urtwn device (maybe while networking, I don't remember).
Resume, get the following dmesg:



Crash version 7.99.34, image version 7.99.34.
System panicked: trap
Backtrace from time of crash is available.
crash> dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.34 (GENERIC) #9: Sat Jul 16 20:15:13 IDT 2016
        fly@:/usr/obj-amd64/sys/arch/amd64/compile/GENERIC
total memory = 3958 MB
avail memory = 3822 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron N4030 (A07)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL  )
ACPI: XSDT 0x00000000BF5F0088 00005C (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: FACP 0x00000000BF5F96B0 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
ACPI: DSDT 0x00000000BF5F0170 009540 (v02 DELL   WN09     00000030 INTL 20051117)
ACPI: FACS 0x00000000BF62DF40 000040
ACPI: FACS 0x00000000BF62DF80 000040
ACPI: APIC 0x00000000BF5F97A8 000072 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: SSDT 0x00000000BF5F9820 00014E (v01 AMICPU PROC     00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BF5F9970 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
ACPI: SLIC 0x00000000BF5F99B0 000176 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: HPET 0x00000000BF5F9B28 000038 (v01 DELL   WN09     01072009 AMI. 00000003)
ACPI: OSFR 0x00000000BF5F9B60 00008C (v01 DELL   M08      07DB0317 ASL  00000061)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded

ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu1 at mainbus0 apid 4
cpu1: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu3 at mainbus0 apid 5
cpu3: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
acpi0 at mainbus0: Intel ACPICA 20160422
acpi0: X/RSDT: OemId <DELL  , WN09   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107086810 0003A4 (v01 AMI    IST      00000001 MSFT 03000001)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (PEGP): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: [6,12,18,24,30,36,42,48,54,60,66,72,78,84,90,100]
acpiout2 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0:   0x0210 (acpiout2): Unknown Output Device, head 0, bios detect
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2, DLL0466) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
PCH (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Sanyo LION rechargeable battery
acpibat0: granularity: low->warn 0.044 Ah, warn->full 0.044 Ah
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 87.0 C, passive cooling
OMSC (PNP0C02) at acpi0 not configured
ACPI: Enabled 5 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0044 (rev. 0x02)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0045 (rev. 0x02)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 68e1 (rev. 0x00)
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 111d product 7605
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x05)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 17
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 3b44 (rev. 0x05)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 18
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 10ec product 8171 (miscellaneous network, revision 0x10) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2: vendor 8086 product 3b46 (rev. 0x05)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 19
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci4 dev 0 function 0: Atheros AR8132 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 18
alc0: Ethernet address f0:4d:a2:96:50:45
atphy0 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb4 at pci0 dev 28 function 4: vendor 8086 product 3b4a (rev. 0x05)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xa5)
pci6 at ppb5 bus 32
pci6: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b0b (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3b2f (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xf720ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 205 us, pow   500 mW
acpicpu0: C3: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow  3125 mW, 2394 MHz
acpicpu0: P1: FFH, lat  10 us, pow  2625 mW, 2261 MHz
acpicpu0: P2: FFH, lat  10 us, pow  2125 mW, 2128 MHz
acpicpu0: P3: FFH, lat  10 us, pow  1750 mW, 1995 MHz
acpicpu0: P4: FFH, lat  10 us, pow  1375 mW, 1862 MHz
acpicpu0: P5: FFH, lat  10 us, pow  1125 mW, 1729 MHz
acpicpu0: P6: FFH, lat  10 us, pow   875 mW, 1596 MHz
acpicpu0: P7: FFH, lat  10 us, pow   625 mW, 1463 MHz
acpicpu0: P8: FFH, lat  10 us, pow   500 mW, 1330 MHz
acpicpu0: P9: FFH, lat  10 us, pow   125 mW,  931 MHz
acpicpu0: T0: FFH, lat   1 us, pow  1000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   875 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow   750 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow   625 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow   500 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow   375 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow   250 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow   125 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2400104080 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <TOSHIBA Q300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <MATSHITA DVD+/-RW UJ8B1, SCB4213678, D.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 product 0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 product 0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhub4 at uhub2 port 2: Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 3
uhub4: 3 ports with 0 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/30.00, addr 3, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir
wsmouse1 at ums0 mux 0
urtwn0 at uhub3 port 3
urtwn0: Realtek 802.11n WLAN Adapter, rev 2.00/2.00, addr 4
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:5b:6c:6c
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhidev1 at uhub4 port 1 configuration 1 interface 0
uhidev1: vendor 413c product 8161, rev 2.00/1.00, addr 4, iclass 3/1
uhidev1: 1 report ids
ukbd0 at uhidev1 reportid 1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 2 configuration 1 interface 0
uhidev2: vendor 413c product 8162, rev 2.00/1.00, addr 5, iclass 3/1
uhidev2: 125 report ids
ums1 at uhidev2 reportid 2: 3 buttons
wsmouse2 at ums1 mux 0
uhid0 at uhidev2 reportid 125: input=2, output=0, feature=0
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/38.82, addr 6
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
uvideo0 at uhub2 port 4 configuration 1 interface 0: Sony Visual Communication Came Laptop_Integrated_Webcam_0.3M, rev 2.00/9b.25, addr 7
video0 at uvideo0: Sony Visual Communication Came Laptop_Integrated_Webcam_0.3M, rev 2.00/9b.25, addr 7
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.34/modules
drm: initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1028:0x0466).
drm: register mmio base: 0xfbe20000
drm: register mmio size: 131072
drm kern info: ATOM BIOS: Dell
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
drm: Detected VRAM RAM=200M, BAR=256M
drm: RAM width 64bits DDR
Zone  kernel: Available graphics memory: 1370486 kiB
drm: radeon: 512M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading CEDAR Microcode
drm: Internal thermal controller with fan control
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff800048059c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff800048059c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff800047c57418
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm:   LVDS-1
drm:   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm:   Encoders:
drm:     LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm:   VGA-1
drm:   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
drm:   Encoders:
drm:     CRT1: INTERNAL_KLDSCP_DAC1
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in r
v770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_halt_smc
: rv770_halt_smc: return 0DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_resume_smc: rv770_resume_smc: return 0
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in r
v770_send_msg_to_smc: rv770 smc is running, result is 1radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1radeondrmkmsfb0: framebuffer at 0xffff80004827b000, size 1366x768, depth 32, strid
e 5632
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using w
skbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
WARNING: the log-structured file system is experimental
WARNING: it may cause system crashes and/or corrupt data
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpi0: entering state S3
Flushing disk caches: done
ioapic0 reenabling
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
wskbd1: disconnecting from wsdisplay0
wskbd1: detached
ukbd0: detached
uhidev1: detached
uhidev1: at uhub4 port 1 (addr 4) disconnected
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
radeon0: info: GPU softreset: 0x00000100
radeon0: info:   GRBM_STATUS               = 0x00003828
radeon0: info:   GRBM_STATUS_SE0           = 0x00000007
radeon0: info:   GRBM_STATUS_SE1           = 0x00000007
radeon0: info:   SRBM_STATUS               = 0x200200C0
radeon0: info:   SRBM_STATUS2              = 0x00000000
radeon0: info:   R_008674_CP_STALLED_STAT1 = 0x00000000
radeon0: info:   R_008678_CP_STALLED_STAT2 = 0x00000000
radeon0: info:   R_00867C_CP_BUSY_STAT     = 0x00000000
radeon0: info:   R_008680_CP_STAT          = 0x00000000
radeon0: info:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
radeon0: info: SRBM_SOFT_RESET=0x00000400
radeon0: info:   GRBM_STATUS               = 0x00003828
radeon0: info:   GRBM_STATUS_SE0           = 0x00000007
radeon0: info:   GRBM_STATUS_SE1           = 0x00000007
radeon0: info:   SRBM_STATUS               = 0x200200C0
radeon0: info:   SRBM_STATUS2              = 0x00000000
radeon0: info:   R_008674_CP_STALLED_STAT1 = 0x00000000
radeon0: info:   R_008678_CP_STALLED_STAT2 = 0x00000000
radeon0: info:   R_00867C_CP_BUSY_STAT     = 0x00000000
radeon0: info:   R_008680_CP_STAT          = 0x00000000
radeon0: info:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffff800048059c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffff800048059c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff800047c57418
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 1 usecs
drm: ib test on ring 5 succeeded
DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in r
v770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg
_to_smc: rv770 smc is running, result is 1DRM error in rv770_halt_smc: rv770_halt_smc: return 0DRM error in rv770_send_msg_to_smc: rv770 smc is running
, result is 1DRM error in rv770_resume_smc: rv770_resume_smc: return 0DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in
 rv770_send_msg_to_smc: rv770 smc is running, result is 1DRM error in rv770_send_msg_to_smc: rv770 smc is running, result is 1wsmouse2: detached
ums1: detached
uhid0: detached
uhidev2: detached
uhidev2: at uhub4 port 2 (addr 5) disconnected
uhub4: detached
uhub4: at uhub2 port 2 (addr 3) disconnected
uhub4 at uhub2 port 2: Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 3
uhub4: 3 ports with 0 removable, self powered
uhidev1 at uhub4 port 1 configuration 1 interface 0
uhidev1: Dell product 8161, rev 2.00/1.00, addr 4, iclass 3/1
uhidev1: 1 report ids
ukbd0 at uhidev1 reportid 1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub4 port 2 configuration 1 interface 0
uhidev2: Dell product 8162, rev 2.00/1.00, addr 5, iclass 3/1
uhidev2: 125 report ids
ums1 at uhidev2 reportid 2: 3 buttons
wsmouse2 at ums1 mux 0
uhid0 at uhidev2 reportid 125: input=2, output=0, feature=0
sd0: detached
scsibus0: detached
umass0: detached
umass0: at uhub2 port 3 (addr 6) disconnected
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/38.82, addr 6
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
video0: detached
uvideo0: detached
uvideo0: at uhub2 port 4 (addr 7) disconnected
uvideo0 at uhub2 port 4 configuration 1 interface 0: Sony Visual Communication Came Laptop_Integrated_Webcam_0.3M, rev 2.00/9b.25, addr 7
video0 at uvideo0: Sony Visual Communication Came Laptop_Integrated_Webcam_0.3M, rev 2.00/9b.25, addr 7
pckbport: command timeout
pms_enable: command error 35
pckbport: command timeout
pckbport: command timeout
pms_disable: command error
pckbport: command timeout
pms_enable: command error 35
pckbport: command timeout
pms_disable: command error
pckbport: command timeout
pms_enable: command error 35
urtwn0: detached
urtwn0: at uhub3 port 3 (addr 4) disconnected
urtwn0 at uhub3 port 3
urtwn0: Realtek 802.11n WLAN Adapter, rev 2.00/2.00, addr 4
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:5b:6c:6c
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uvm_fault(0xfffffe810741d730, 0x0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff80328067 cs 8 rflags 10286 cr2 0 ilevel 6 rsp fffffe80412e8450
curlwp 0xfffffe81251ae480 pid 2325.1 lowest kstack 0xfffffe80412e52c0
panic: trap
cpu1: Begin traceback...
vpanic() at netbsd:vpanic+0x140
snprintf() at netbsd:snprintf
trap() at netbsd:trap+0xc4b
--- trap (number 6) ---
usbd_setup_xfer() at netbsd:usbd_setup_xfer+0x20
urtwn_init() at netbsd:urtwn_init+0x149a
ether_ioctl() at netbsd:ether_ioctl+0xcb
ieee80211_ioctl() at netbsd:ieee80211_ioctl+0xa45
urtwn_ioctl() at netbsd:urtwn_ioctl+0x8c
in6_update_ifa1() at netbsd:in6_update_ifa1+0x838
in6_update_ifa() at netbsd:in6_update_ifa+0x3b
in6_ifattach_linklocal() at netbsd:in6_ifattach_linklocal+0x346
in6_ifattach() at netbsd:in6_ifattach+0x162
in6_if_up() at netbsd:in6_if_up+0x13
if_up() at netbsd:if_up+0x3d
ifioctl_common() at netbsd:ifioctl_common+0x299
urtwn_ioctl() at netbsd:urtwn_ioctl+0xb4
doifioctl() at netbsd:doifioctl+0x715
soo_ioctl() at netbsd:soo_ioctl+0x2b5
sys_ioctl() at netbsd:sys_ioctl+0x101
syscall() at netbsd:syscall+0x15b
--- syscall (number 54) ---
72c4204e90fa:
cpu1: End traceback...

dumping to dev 0,1 (offset=25095111, size=1013425):
dump
>How-To-Repeat:
Seems like if you roll the dice just right, urtwn will attach first,
even though USB is not ready yet.
>Fix:



Home | Main Index | Thread Index | Old Index