kern/50652: usbd_new_device: addr=3, getting first desc failed: 17

[zhuzhongjie%xiaomi.com@localhost]

>Number:         50652
>Category:       kern
>Synopsis:       usbd_new_device: addr=3, getting first desc failed: 17
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jan 13 04:25:01 +0000 2016
>Originator:     Zhongjie Zhu
>Release:        NetBSD 7.0
>Organization:
Xiaomi
>Environment:
NetBSD X201i 7.0 NetBSD 7.0 (GENERIC.201509250726Z) amd64
>Description:
when boot with the cdce device connected, the cdce device is not enumerated, I need to pull it out and then plug it in.
the cdce device works fine when the boot is completed



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_STABLE (GENERIC.X201i) #0: Wed Jan 13 11:28:03 CST 2016
	zj@zj-OptiPlex-790:/home/zj/src/bsd/NetBSD/src/sys/arch/amd64/compile/obj/GENERIC.X201i
total memory = 1907 MB
avail memory = 1834 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 3249MUC (ThinkPad X201)
mainbus0 (root)
ACPI: RSDP 0xf68f0 000024 (v02 LENOVO)
ACPI: XSDT 0x777f0970 00008C (v01 LENOVO TP-6Q    00001160  LTP 00000000)
ACPI: FACP 0x777f0b00 0000F4 (v04 LENOVO TP-6Q    00001160 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716)
ACPI: DSDT 0x777f0e6b 00DD26 (v01 LENOVO TP-6Q    00001160 MSFT 03000001)
ACPI: FACS 0x776e7000 000040
ACPI: SSDT 0x777f0cb4 0001B7 (v01 LENOVO TP-6Q    00001160 MSFT 03000001)
ACPI: ECDT 0x777feb91 000052 (v01 LENOVO TP-6Q    00001160 LNVO 00000001)
ACPI: APIC 0x777febe3 000068 (v01 LENOVO TP-6Q    00001160 LNVO 00000001)
ACPI: MCFG 0x777fec9f 00003C (v01 LENOVO TP-6Q    00001160 LNVO 00000001)
ACPI: HPET 0x777fecdb 000038 (v01 LENOVO TP-6Q    00001160 LNVO 00000001)
ACPI: ASF! 0x777fedbe 0000A4 (v16 LENOVO TP-6Q    00001160 PTL  00000001)
ACPI: SLIC 0x777fee62 000176 (v01 LENOVO TP-6Q    00001160  LTP 00000000)
ACPI: BOOT 0x777fefd8 000028 (v01 LENOVO TP-6Q    00001160  LTP 00000001)
ACPI: SSDT 0x776e590a 00085B (v01 LENOVO TP-6Q    00001160 INTL 20050513)
ACPI: SSDT 0x7778b000 0009F1 (v01  PmRef    CpuPm 00003000 INTL 20050513)
ACPI: SSDT 0x7778a000 000259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050513)
ACPI: SSDT 0x77789000 00049F (v01  PmRef    ApTst 00003000 INTL 20050513)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Celeron(R) CPU        U3400  @ 1.07GHz, id 0x20655
cpu1 at mainbus0 apid 4: Intel(R) Celeron(R) CPU        U3400  @ 1.07GHz, id 0x20655
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-6Q   ,00001160>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0x7771ac18 0002A1 (v01  PmRef  Cpu0Ist 00003000 INTL 20050513)
ACPI: SSDT 0x0 0002A1 (v01  PmRef  Cpu0Ist 00003000 INTL 20050513)
ACPI: SSDT 0x77718718 0006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20050513)
ACPI: SSDT 0x0 0006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20050513)
ACPI: SSDT 0x77719a98 000303 (v01  PmRef    ApIst 00003000 INTL 20050513)
ACPI: SSDT 0x0 000303 (v01  PmRef    ApIst 00003000 INTL 20050513)
ACPI: SSDT 0x77717d98 000119 (v01  PmRef    ApCst 00003000 INTL 20050513)
ACPI: SSDT 0x0 000119 (v01  PmRef    ApCst 00003000 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 2 3 4 7 9 11 13 17 20 24 28 32 40 50 66 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0018) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0): cpu0 cpu1
acpitz0: levels: critical 100.0 C, passive 91.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Extended W mode, Passthrough, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0046 (rev. 0x02)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000229e3000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller (rev. 0x06)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address f0:de:f1:08:99:e4
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: Conexant CX20585
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: Intel G45 HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 13
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: vendor 0x8086 product 0x3b48 (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x06)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: vendor 0x8086 product 0x0084 (rev. 0x00)
iwn0: interrupting at ioapic0 pin 16
iwn0: MIMO 1T2R, BGS, address 00:26:c7:5d:c7:a6
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa6)
pci4 at ppb3 bus 14
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b07 (rev. 0x06)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b2f (rev. 0x06)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff20ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x06)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x3b32 (miscellaneous DASP, revision 0x06) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
pci5 at mainbus0 bus 255
pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci5 dev 0 function 0: vendor 0x8086 product 0x2c62 (rev. 0x02)
pchb2 at pci5 dev 0 function 1: vendor 0x8086 product 0x2d01 (rev. 0x02)
pchb3 at pci5 dev 2 function 0: vendor 0x8086 product 0x2d10 (rev. 0x02)
pchb4 at pci5 dev 2 function 1: vendor 0x8086 product 0x2d11 (rev. 0x02)
pchb5 at pci5 dev 2 function 2: vendor 0x8086 product 0x2d12 (rev. 0x02)
pchb6 at pci5 dev 2 function 3: vendor 0x8086 product 0x2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 205 us, pow   500 mW
acpicpu0: C3: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 11000 mW, 1066 MHz
acpicpu0: P1: FFH, lat  10 us, pow  9509 mW,  933 MHz
acpicpu0: P2: FFH, lat  10 us, pow  8060 mW,  799 MHz
acpicpu0: P3: FFH, lat  10 us, pow  6641 mW,  666 MHz
acpicpu0: T0: FFH, lat   1 us, pow  6641 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow  5810 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow  4980 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow  4150 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow  3320 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow  2490 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  1660 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow   830 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1064073120 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0uhub_attach
: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub_attach: getting hub descriptor
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1uhub_attach
: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub_attach: getting hub descriptor
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
uhub_explore: status change hub=1 port=1
uhub_explore: status change hub=1 port=1
wd0 at atabus0 drive 0
wd0: <KINGSTON SVP100S296G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 91580 MB, 186069 cyl, 16 head, 63 sec, 512 bytes/sect x 187557552 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1uhub_attach
: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub_attach: getting hub descriptor
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1uhub_attach
: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub_attach: getting hub descriptor
uhub3: 8 ports with 8 removable, self powered
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
usb_init_port: turn on port 4 power
usb_init_port: turn on port 5 power
usb_init_port: turn on port 6 power
usb_init_port: turn on port 1 power
usb_init_port: turn on port 2 power
usb_init_port: turn on port 3 power
usb_init_port: turn on port 4 power
usb_init_port: turn on port 5 power
usb_init_port: turn on port 6 power
usb_init_port: turn on port 7 power
usb_init_port: turn on port 8 power
uhub_explore: status change hub=2 port=1
usbd_new_device: addr=3, getting first desc failed: 17
uhub_explore: usbd_new_device failed, error=STALLED
uhub2: device problem, disabling port 1
uhub_explore: status change hub=2 port=2
umidi_search_quirk: v=34372, p=32779, i=0
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: SSK SSK SFD199 USB Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub_explore: status change hub=2 port=1
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
uhub_explore: status change hub=2 port=1
umidi_search_quirk: v=3034, p=33106, i=0
umidi_search_quirk: v=3034, p=33106, i=0
cdce0 at uhub2 port 1 configuration 2 interface 0
cdce0: Realtek USB 10/100 LAN, rev 2.10/20.00, addr 4
cdce0: address 9c:eb:e8:12:c9:bc
>How-To-Repeat:

>Fix: