NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

port-amd64/50650: i965(i915drmkms): black wscons switching back from X11



>Number:         50650
>Category:       port-amd64
>Synopsis:       i965(i915drmkms): black wscons switching back from X11
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Jan 12 06:35:00 +0000 2016
>Originator:     is%nebsd.org@localhost
>Release:        NetBSD 7.0_STABLE
>Organization:
	private machine
>Environment:
	
	
System: NetBSD henrietta 7.0_STABLE NetBSD 7.0_STABLE (GENERIC) #2: Sat Jan 9 15:39:43 CET 2016 is@henrietta:/var/itch/sources/7/obj.amd64/sys/arch/amd64/compile/GENERIC amd64
Architecture: x86_64
Machine: amd64

>From pkgin ls:

xf86-input-keyboard-1.8.1nb1;Modular Xorg keyboard driver
xf86-input-mouse-1.9.1nb2;Modular Xorg mouse driver
xf86-input-void-1.4.1;Modular Xorg dummy input driver
xf86-video-intel-2.99.917nb3;Modular Xorg Intel video driver
xf86-video-vesa-2.3.3nb3;Modular Xorg VESA video driver
xf86-video-wsfb-0.4.0nb1;Modular Xorg wsdisplay framebuffer video driver
modular-xorg-server-1.17.1;Modular X11 server from modular X.org

>From Xorg.0.log:

[    36.963] (II) Loading /usr/pkg/lib/xorg/modules/drivers/intel_drv.so
[    37.010] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[    37.011] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so

/var/run/dmesg.boot:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_STABLE (GENERIC) #2: Sat Jan  9 15:39:43 CET 2016
	is@henrietta:/var/itch/sources/7/obj.amd64/sys/arch/amd64/compile/GENERIC
total memory = 4022 MB
avail memory = 3887 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7661LN8 (ThinkPad T61)
mainbus0 (root)
ACPI: RSDP 0xf68d0 000024 (v02 LENOVO)
ACPI: XSDT 0xbf6bb77f 000094 (v01 LENOVO TP-7L    00002170  LTP 00000000)
ACPI: FACP 0xbf6bb900 0000F4 (v03 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20131218/tbfadt-664)
ACPI: DSDT 0xbf6bbd1d 00FED1 (v01 LENOVO TP-7L    00002170 MSFT 03000000)
ACPI: FACS 0xbf6e4000 000040
ACPI: SSDT 0xbf6bbab4 000269 (v01 LENOVO TP-7L    00002170 MSFT 03000000)
ACPI: ECDT 0xbf6cbbee 000052 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI: TCPA 0xbf6cbc40 000032 (v02 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI: APIC 0xbf6cbc72 000068 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI: MCFG 0xbf6cbcda 00003C (v01 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI: HPET 0xbf6cbd16 000038 (v01 LENOVO TP-7L    00002170 LNVO 00000001)
ACPI: SLIC 0xbf6cbdf0 000176 (v01 LENOVO TP-7L    00002170  LTP 00000000)
ACPI: BOOT 0xbf6cbf66 000028 (v01 LENOVO TP-7L    00002170  LTP 00000001)
ACPI: ASF! 0xbf6cbf8e 000072 (v16 LENOVO TP-7L    00002170 PTL  00000001)
ACPI: SSDT 0xbf6e2697 00025F (v01 LENOVO TP-7L    00002170 INTL 20050513)
ACPI: SSDT 0xbf6e28f6 0000A6 (v01 LENOVO TP-7L    00002170 INTL 20050513)
ACPI: SSDT 0xbf6e299c 0004F7 (v01 LENOVO TP-7L    00002170 INTL 20050513)
ACPI: SSDT 0xbf6e2e93 0001D8 (v01 LENOVO TP-7L    00002170 INTL 20050513)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz, id 0x6fd
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz, id 0x6fd
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-7L   ,00002170>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xbf6e1b32 000282 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 0x0 000282 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1e39 00085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 0x0 00085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1a6a 0000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 0x0 0000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 0xbf6e1db4 000085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: SSDT 0x0 000085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
TPM (ATM1200) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: sanasoni LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0:   0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Passthrough, Palm detect, Two button click pad
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000477f8000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 00:21:86:xx:xx:xx
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: ADI AD1984
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4230 (rev. 0x61)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 2T3R, MoW2, address 00:21:5c:xx:xx:xx
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:29:cd:d8
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe710ff82<CCCS,PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32031114 rev 0x9
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat   1 us, pow   500 mW
acpicpu0: C3: FFH, lat  57 us, pow   100 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 1801 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 1800 MHz
acpicpu0: P2: FFH, lat  10 us, pow 16000 mW, 1200 MHz
acpicpu0: P3: FFH, lat  10 us, pow 14000 mW,  800 MHz
acpicpu0: T0: FFH, lat   1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow 12250 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow 10500 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow  8750 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow  7000 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow  5250 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  3500 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow  1750 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
DRM error in i965_irq_handler: pipe A underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter offline.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R9012, 54GA308694, 1121> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0
wd0: <WDC WD10JPVT-00A1YT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: component0[**FAILED**] /dev/wd0a
raid0: Total Sectors: 1953522944 (953868 MB)
boot device: raid0
root on raid0a dumps on raid0b
ugen0 at uhub4 port 2
root file system type: ffs
ugen0: Lenovo Integrated Smart Card Reader, rev 2.00/1.00, addr 2
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
iwn0: radio is disabled by hardware switch
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
iwn0: RF switch: radio disabled
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)

>Description:
	I've tested the netbsd-7.0_PATCH GENERIC kernel with my 6.1.5
	installation. I can start X using the driver x-video-intel.
	Works fine, mplayer can use XV for scaled full-screen (instead
	of boxed as with netbsd-6 kernel+video-vesa) output.
	xrandr can switch resolutions on the LCD panel and VGA output 
	etc. (which wasn't usable with vesa).

	However, switching back to a WSCONS text terminal (ctrl-alt-F1
	etc.) shows only black. (but I can blindly log in and run
	echo ctrl-g to beep). I can switch back to X11 (ctrl-alt-F5).

>How-To-Repeat:
	ctrl-alt-F1
>Fix:
	unknown. 

>Unformatted:
 	Userland: amd64 netbsd-6.1.5_PATCH 
 	X11: pkgsrc-2015Q2 x11 



Home | Main Index | Thread Index | Old Index