Re: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra

To: xsrc-manager%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,prlw1%cam.ac.uk@localhost
Subject: Re: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra
From: "John D. Baker" <jdbaker%mylinuxisp.com@localhost>
Date: Fri, 8 Jan 2016 23:05:01 +0000 (UTC)

The following reply was made to PR xsrc/50599; it has been noted by GNATS.

From: "John D. Baker" <jdbaker%mylinuxisp.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra
Date: Fri, 8 Jan 2016 16:59:38 -0600 (CST)

 "Me too!"
 
 i386:
 
 Same card as submitter.  Same result, except no modelines printed at all.
 
 NetBSD verthandi 7.99.25 NetBSD 7.99.25 (VERTHANDI) #7: Mon Dec 21 09:33:45 CST 2015  sysop%x3650.technoskunk.fur@localhost:/r0/build/nbsd-tst/obj/i386/sys/arch/i386/compile/VERTHANDI i386
 
 [...]
 [512819.812] (II) Loading sub module "vgahw"
 [512819.812] (II) LoadModule: "vgahw"
 [512819.835] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
 [512819.836] (II) Module vgahw: vendor="X.Org Foundation"
 [512819.836] 	compiled for 1.10.6, module version = 0.1.0
 [512819.837] 	ABI class: X.Org Video Driver, version 10.0
 [512819.837] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
 [512819.837] (==) R128(0): RGB weight 888
 [512819.837] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
 [512819.837] (II) Loading sub module "int10"
 [512819.837] (II) LoadModule: "int10"
 [512819.847] (II) Loading /usr/X11R7/lib/modules/libint10.so
 [512819.850] (II) Module int10: vendor="X.Org Foundation"
 [512819.850] 	compiled for 1.10.6, module version = 1.0.0
 [512819.850] 	ABI class: X.Org Video Driver, version 10.0
 [512819.850] (II) R128(0): initializing int10
 [512819.851] (WW) R128(0): remove MTRR a0000 - c0000
 [512819.851] (WW) R128(0): remove MTRR c0000 - 100000
 [512819.857] (II) R128(0): Primary V_BIOS segment is: 0xc000
 [512819.857] (WW) R128(0): remove MTRR 0 - 1000
 [512819.858] (--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TF (AGP)" (ChipID = 0x5446)
 [512819.858] (--) R128(0): Linear framebuffer at 0xf8000000
 [512819.858] (--) R128(0): MMIO registers at 0xff8fc000
 [512819.858] (--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
 [512819.858] (II) Loading sub module "ddc"
 [512819.858] (II) LoadModule: "ddc"
 [512819.858] (II) Module "ddc" already built-in
 [512819.858] (II) Loading sub module "i2c"
 [512819.858] (II) LoadModule: "i2c"
 [512819.858] (II) Module "i2c" already built-in
 [512819.858] (II) Loading sub module "vbe"
 [512819.858] (II) LoadModule: "vbe"
 [512819.868] (II) Loading /usr/X11R7/lib/modules/libvbe.so
 [512819.869] (II) Module vbe: vendor="X.Org Foundation"
 [512819.869] 	compiled for 1.10.6, module version = 1.1.0
 [512819.869] 	ABI class: X.Org Video Driver, version 10.0
 [512819.871] (II) R128(0): VESA BIOS detected
 [512819.871] (II) R128(0): VESA VBE Version 2.0
 [512819.871] (II) R128(0): VESA VBE Total Mem: 32768 kB
 [512819.871] (II) R128(0): VESA VBE OEM: ATI RAGE128
 [512819.871] (II) R128(0): VESA VBE OEM Software Rev: 1.0
 [512819.871] (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
 [512819.871] (II) R128(0): VESA VBE OEM Product: R128
 [512819.871] (II) R128(0): VESA VBE OEM Product Rev: 01.00
 [512819.871] (II) Loading sub module "ddc"
 [512819.871] (II) LoadModule: "ddc"
 [512819.871] (II) Module "ddc" already built-in
 [512819.976] (II) R128(0): VESA VBE DDC supported
 [512819.976] (II) R128(0): VESA VBE DDC Level none
 [512819.976] (II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
 [512820.081] (II) R128(0): VESA VBE DDC read failed
 [512820.084] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=35000; xclk=13400
 [512820.084] (II) R128(0): Output DVI-0 using monitor section Monitor0
 [512820.084] (II) R128(0): I2C bus "DVI-0" initialized.
 [512820.084] (II) R128(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
 [512820.089] (WW) R128(0): remove MTRR 0 - 1000
 [512820.089] (II) UnloadModule: "r128"
 [512820.089] (II) Unloading r128
 [512820.090] (II) UnloadModule: "vbe"
 [512820.090] (II) Unloading vbe
 [512820.090] (II) UnloadModule: "int10"
 [512820.090] (II) Unloading int10
 [512820.090] (II) UnloadModule: "vgahw"
 [512820.090] (II) Unloading vgahw
 [512820.090] (EE) Screen(s) found, but none have a usable configuration.
 [512820.090] 
 Fatal server error:
 [512820.090] no screens found
 [512820.090] 
 Please consult the The X.Org Foundation support 
 	 at http://wiki.X.Org
  for help. 
 [512820.090] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
 [512820.090] 
 
 
 
 macppc:
 
 NetBSD sawtooth.technoskunk.fur 7.99.25 NetBSD 7.99.25 (GENERIC) #3: Sun Dec 27 17:05:22 CST 2015  sysop%x3650.technoskunk.fur@localhost:/r0/build/current/obj/macppc/sys/arch/macppc/compile/GENERIC macppc
 
 [...]
 [   767.174] (II) R128(0): VGAHW support not compiled, VGA module load skipped
 [   767.174] (==) R128(0): RGB weight 888
 [   767.174] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
 [   767.174] (--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
 [   767.174] (--) R128(0): Linear framebuffer at 0x94000000
 [   767.174] (--) R128(0): MMIO registers at 0x90000000
 [   767.175] (--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
 [   767.175] (II) Loading sub module "ddc"
 [   767.175] (II) LoadModule: "ddc"
 [   767.175] (II) Module "ddc" already built-in
 [   767.176] (II) Loading sub module "i2c"
 [   767.176] (II) LoadModule: "i2c"
 [   767.176] (II) Module "i2c" already built-in
 [   767.229] (WW) R128(0): Video BIOS not found!
 [   767.229] (II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=14038
 [   767.230] (II) R128(0): Output DVI-0 has no monitor section
 [   767.231] (II) R128(0): I2C bus "DVI-0" initialized.
 [   767.231] (II) R128(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
 [   767.234] (II) UnloadModule: "r128"
 [   767.234] (II) Unloading r128
 [   767.234] (EE) Screen(s) found, but none have a usable configuration.
 [   767.234] 
 Fatal server error:
 [   767.234] no screens found
 [   767.235] 
 Please consult the The X.Org Foundation support 
          at http://wiki.X.Org
  for help. 
 [   767.235] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
 [   767.235] 
 
 -- 
 |/"\ John D. Baker, KN5UKS               NetBSD     Darwin/MacOS X
 |\ / jdbaker[snail]mylinuxisp[flyspeck]com    OpenBSD            FreeBSD
 | X  No HTML/proprietary data in email.   BSD just sits there and works!
 |/ \ GPGkeyID:  D703 4A7E 479F 63F8 D3F4  BD99 9572 8F23 E4AD 1645

Prev by Date: port-arm/50635: arm11_setup() cpuctrlmask value causes CPU_CONTROL_VECRELOC bit to toggle
Next by Date: Re: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra
Previous by Thread: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra
Next by Thread: Re: xsrc/50599: xf86-video-r128 6.10.0 breaks rage 128 pro ultra
Indexes:

Home | Main Index | Thread Index | Old Index