PR/48960 CVS commit: [netbsd-6] src/sys

["Soren Jacobsen" <snj%netbsd.org@localhost>]

The following reply was made to PR kern/48960; it has been noted by GNATS.

From: "Soren Jacobsen" <snj%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: PR/48960 CVS commit: [netbsd-6] src/sys
Date: Fri, 16 Jan 2015 08:22:25 +0000

 Module Name:	src
 Committed By:	snj
 Date:		Fri Jan 16 08:22:25 UTC 2015
 
 Modified Files:
 	src/sys/arch/x86/pci [netbsd-6]: ichlpcib.c
 	src/sys/dev/ic [netbsd-6]: i82801lpcreg.h
 	src/sys/dev/pci [netbsd-6]: pci_map.c pcivar.h
 
 Log Message:
 Pull up following revision(s) (requested by msaitoh in ticket #1229):
 	sys/arch/x86/pci/ichlpcib.c: revision 1.40, 1.45
 	sys/dev/pci/pcivar.h: revision 1.101
 	sys/dev/pci/pci_map.c: revision 1.32
 	sys/dev/ic/i82801lpcreg.h: revision 1.12
 Use '\n' at the end of all aprint_error_dev() format strings.
 --
 Fix a bug that ichlpcib(4) maps I/O area incorrectly and then fails to attach
 gpio. It might also fixes ACPI related problem described in PR#48960:
  - The LPCIB_PCI_PMBASE and LPCIB_PCI_GPIO register are alike PCI BAR but not
    completely compatible with it. It's ok because the registers' addresses are
    out of BAR0-BAR5(0x10-0x24) and are located in the device-dependent header.
    The PMBASE and GPIO registers define the base address and the type but not
    describe the size. The size is fixed to 128bytes. So use
    pci_mapreg_submap().
  - Make pci_mapreg_submap() extern again.
  - Fix the calculation of the map size in pci_mapreg_submap().
 
 
 To generate a diff of this commit:
 cvs rdiff -u -r1.34 -r1.34.6.1 src/sys/arch/x86/pci/ichlpcib.c
 cvs rdiff -u -r1.11 -r1.11.14.1 src/sys/dev/ic/i82801lpcreg.h
 cvs rdiff -u -r1.29 -r1.29.10.1 src/sys/dev/pci/pci_map.c
 cvs rdiff -u -r1.98 -r1.98.2.1 src/sys/dev/pci/pcivar.h
 
 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.