re: xsrc/49155: openchrome hardware cursor always invisible

["John D. Baker" <jdbaker%mylinuxisp.com@localhost>]

The following reply was made to PR xsrc/49155; it has been noted by GNATS.

From: "John D. Baker" <jdbaker%mylinuxisp.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: re: xsrc/49155: openchrome hardware cursor always invisible
Date: Tue, 26 Aug 2014 21:45:55 -0500 (CDT)

 On Wed, 27 Aug 2014, matthew green wrote:
 
 >  can you try this without viadrm attached?  just to see if it works...
 
 With "viadrm" diabled, the X server fails to start.
 
 NetBSD 7.99.1 (NEOWARE) #5: Sun Aug 24 20:25:53 CDT 2014
         
sysop%verthandi.technoskunk.fur@localhost:/d0/build/current/obj/i386/sys/arch/i386/compile/NEOWARE
 total memory = 1015 MB
 avail memory = 992 MB
 kern.module.path=/stand/i386/7.99.1/modules
 timecounter: Timecounters tick every 10.000 msec
 userconf: configure system autoconfiguration:
 uc> disable viadrm
 [ 46] viadrm* disabled
 uc> exit
 [...]
 pchb0 at pci0 dev 0 function 0: VIA Technologies VT8623 (Apollo CLE266) 
CPU-PCI Bridge (rev. 0x00)
 agp0 at pchb0: aperture at 0xe4000000, size 0x4000000
 ppb0 at pci0 dev 1 function 0: VIA Technologies VT8633 (Apollo Pro 266) 
CPU-AGP Bridge (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: VIA Technologies VT8623 (Apollo CLE266) VGA 
Controller (rev. 0x03)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 
 
 $ cat /var/log/xdm.log                                   
 xdm info (pid 1624): Starting
 xdm error (pid 1624): XDMCP socket multicast join to ff02::12b failed, errno 49
 xdm info (pid 1624): Starting X server on :0
 
 X.Org X Server 1.10.6
 Release Date: 2011-07-08
 X Protocol Version 11, Revision 0
 Build Operating System: NetBSD/i386  - 
 Current Operating System: NetBSD neoware 7.99.1 NetBSD 7.99.1 (NEOWARE) #5: 
Sun Aug 24 20:25:53 CDT 2014  
sysop%verthandi.technoskunk.fur@localhost:/d0/build/current/obj/i386/sys/arch/i386/compile/NEOWARE
 i386
 Build Date: 01 August 2011  01:01:00AM
  
 Current version of pixman: 0.32.6
         Before reporting problems, check http://wiki.X.Org
         to make sure that you have the latest version.
 Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 26 21:30:39 2014
 (==) Using default built-in configuration (21 lines)
 (EE) CHROME(0): [drm] Failed to open DRM device for pci:0001:01:00.0: Device 
not configured
 Linear memory allocation failed
 DRM memory allocation failed -12
 Segmentation fault at address 0x10
 
 Fatal server error:
 Caught signal 11 (Segmentation fault). Server aborting
 
 
 Please consult the The X.Org Foundation support 
          at http://wiki.X.Org
  for help. 
 Please also check the log file at "/var/log/Xorg.0.log" for additional 
information.
 
 xdm error (pid 1624): server unexpectedly died
 xdm error (pid 1624): Server for display :0 can't be started, session disabled
 
 
 I don't see an option to disable DRI in the server/device configuration.
 
 -- 
 |/"\ John D. Baker, KN5UKS               NetBSD     Darwin/MacOS X
 |\ / jdbaker[snail]mylinuxisp[flyspeck]com    OpenBSD            FreeBSD
 | X  No HTML/proprietary data in email.   BSD just sits there and works!
 |/ \ GPGkeyID:  D703 4A7E 479F 63F8 D3F4  BD99 9572 8F23 E4AD 1645