NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/48891: iwn Intel Centrino Wireless-N 1030 not working

>Number:         48891
>Category:       kern
>Synopsis:       iwn Intel Centrino Wireless-N 1030 not working
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Jun 10 15:05:00 +0000 2014
>Originator:     Jimmie Houchin
>Release:        6.1.4 AMD64
NetBSD 6.1.4 GENERIC amd64
During and after installation iwn0 did not work.

After installation I plugged in an ethernet cable and installed 
iwn-firmware- I configured rc.conf and wpa_supplicant.conf.

Nothing changed from any of the previous errors which were as follows.

iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: cannot assign link-local address
iwn0: fatal firmware error
firmware error log:
  error type      = "UNKNOWN" (0x00001999)
  program counter = 0x00013688
  source line     = 0x0000012F
  error data      = 0x00000001000000A4
  branch link     = 0x0001367C0001367C
  interrupt link  = 0x0000C17A00000000
  time            = 28083 

dmesg says:
iwn0 at pci3 dev 0 function 0: vendor 0x8086 product 0x008a (rev. 0x34)
iwn0: interrupting at ioapic0 pin 19
iwn0: MIMO 1T2R, BGN, address MY_MAC_ADDRESS
iwn0: 11b rates: 1Mbps 3Mbps 5.5Mbps 11Mbps
iwn0: llg rates: 1Mbps 3Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps

ifconfig iwn0
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        powersave off
        address MY_MAC_ADDRESS
        media: IEEE802.11 autoselect
        status: no network 

My laptop is an HP Pavilion M7. The wireless nic came from a previous Dell.

I have installed a few times. I have never gotten it to work during or after 
any install.

Home | Main Index | Thread Index | Old Index