Re: port-amd64/48387: Boot process assigns IDE wd0 rather than installed wd0 on SATA

[Doug Milam <milam.doug%gmail.com@localhost>]

The following reply was made to PR port-amd64/48387; it has been noted by GNATS.

From: Doug Milam <milam.doug%gmail.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: port-amd64-maintainer%netbsd.org@localhost,
 gnats-admin%netbsd.org@localhost,
 netbsd-bugs%netbsd.org@localhost
Subject: Re: port-amd64/48387: Boot process assigns IDE wd0 rather than 
installed wd0 on SATA
Date: Mon, 18 Nov 2013 18:59:53 -0800

 Thanks. I have since upgraded to 6.1.2, but here=92s the dmesg output =
 from the 5.2_STABLE installation, followed by that from 6.1.2 and its =
 disklabel info
 
 dmesg =97
 
 NetBSD 5.2_STABLE (GENERIC) #0: Sat Nov 16 01:16:46 PST 2013
        =
 root@:/root/sysbuild/amd64/obj/usr/src/sys/arch/amd64/compile/GENERIC
 total memory =3D 4085 MB
 avail memory =3D 3944 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.5 @ 0xf0000 (36 entries)
 Shuttle Inc SG31 (V10)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel 686-class, 2802MHz, id 0x1067a
 cpu1 at mainbus0 apid 1: Intel 686-class, 2802MHz, id 0x1067a
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <Shuttl,Shuttle ,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
 timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 FWH (INT0800) at acpi0 not configured
 FAN (PNP0C0B) at acpi0 not configured
 acpitz0 at acpi0 (THRM): active cooling level 0: 50.0C critical 60.0C =
 passive -273.-3C
 attimer1: attached to pcppi1
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x8086 product 0x29c0 (rev. 0x10)
 agp0 at pchb0: detected 7164k stolen memory
 agp0: aperture at 0xd0000000, size 0x10000000
 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x29c2 (rev. 0x10)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 vendor 0x8086 product 0x29c3 (miscellaneous display, revision 0x10) at =
 pci0 dev 2 function 1 not configured
 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 mskc0 at pci2 dev 0 function 0mskc0: interrupt moderation is 0 us
 , Yukon-2 EC Ultra (0x5): ioapic0 pin 17
 msk0 at mskc0 port A: Ethernet address 00:30:1b:48:0c:4f
 ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
 1000baseT-FDX, auto
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. =
 0x01)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. =
 0x01)
 uhci1: interrupting at ioapic0 pin 19
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. =
 0x01)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. =
 0x01)
 uhci3: interrupting at ioapic0 pin 16
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. =
 0x01)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled
 ath0 at pci3 dev 9 function 0
 ath0: interrupting at ioapic0 pin 17
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps =
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: mac 13.10 phy 8.1 radio 13.0
 fwohci0 at pci3 dev 10 function 0: vendor 0x104c product 0x8023 (rev. =
 0x00)
 fwohci0: interrupting at ioapic0 pin 18
 fwohci0: OHCI version 1.10 (ROM=3D1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:30:1b:00:00:46:c2:9b
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ichlpcib0 at pci0 dev 31 function 0
 ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel ignored (disabled)
 piixide1 at pci0 dev 31 function 2
 piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
 piixide1: bus-master DMA support present
 piixide1: primary channel configured to native-PCI mode
 piixide1: using ioapic0 pin 19 for native-PCI interrupt
 atabus1 at piixide1 channel 0
 piixide1: secondary channel configured to native-PCI mode
 atabus2 at piixide1 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. =
 0x01)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 fwohci0: BUS reset
 fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
 ieee1394if0: bus manager 0 (me)
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, =
 addr 1
 uhub4: 8 ports with 8 removable, self powered
 wd0 at atabus0 drive 1: <HDS725050KLAT80>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 =
 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using =
 DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-S223Q, , SB03> cdrom =
 removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd1 at atabus1 drive 0: <WDC WD6401AALS-00L3B2>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 =
 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
 DMA)
 cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using =
 DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex, playback, capture
 boot device: wd1
 root on wd1a dumps on wd1b
 root file system type: ffs
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, =
 2005,
     2006, 2007, 2008, 2009, 2010
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.1.2 (GENERIC)
 total memory =3D 4085 MB
 avail memory =3D 3951 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 Shuttle Inc SG31 (V10)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 CPU         E7400  @ =
 2.80GHz, id 0x1067a
 cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 CPU         E7400  @ =
 2.80GHz, id 0x1067a
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <Shuttl,Shuttle ,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 SYSR (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 PMIO (PNP0C02) at acpi0 not configured
 FWH (INT0800) at acpi0 not configured
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
 acpitz0 at acpi0 (THRM): cpu0
 acpitz0: active cooling level 0: 50.0C
 acpitz0: levels: critical 60.0 C, passive 50.0 C
 attimer1: attached to pcppi1
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29c0 (rev. 0x10)
 agp0 at pchb0: detected 7164k stolen memory
 agp0: aperture at 0xd0000000, size 0x10000000
 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x29c2 (rev. 0x10)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 i915drm0 at vga0: Intel G33
 i915drm0: AGP at 0xd0000000 256MB
 i915drm0: Initialized i915 1.6.0 20080730
 vendor 0x8086 product 0x29c3 (miscellaneous display, revision 0x10) at =
 pci0 dev 2 function 1 not configured
 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 mskc0 at pci2 dev 0 function 0, Yukon-2 EC Ultra (0x5): ioapic0 pin 17
 msk0 at mskc0 port A: Ethernet address 00:30:1b:48:0c:4f
 ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
 1000baseT-FDX, auto
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. =
 0x01)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. =
 0x01)
 uhci1: interrupting at ioapic0 pin 19
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. =
 0x01)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. =
 0x01)
 uhci3: interrupting at ioapic0 pin 16
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. =
 0x01)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled
 ath0 at pci3 dev 9 function 0: Atheros 5416
 pci_set_powerstate not supported
 ath0: interrupting at ioapic0 pin 17
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps =
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: mac 13.10 phy 8.1 radio 13.0
 fwohci0 at pci3 dev 10 function 0: vendor 0x104c product 0x8023 (rev. =
 0x00)
 fwohci0: interrupting at ioapic0 pin 18
 fwohci0: OHCI version 1.10 (ROM=3D1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:30:1b:00:00:46:c2:9b
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. =
 0x01)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller =
 (ICH7) (rev. 0x01)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel ignored (disabled)
 piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid =
 Controller (ICH7) (rev. 0x01)
 piixide1: bus-master DMA support present
 piixide1: primary channel configured to native-PCI mode
 piixide1: using ioapic0 pin 19 for native-PCI interrupt
 atabus1 at piixide1 channel 0
 piixide1: secondary channel configured to native-PCI mode
 atabus2 at piixide1 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. =
 0x01)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 coretemp0 at cpu0: thermal sensor, 1 C resolution
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution
 fwohci0: BUS reset
 fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me)
 ieee1394if0: bus manager 0
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, =
 addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, =
 addr 1
 uhub4: 8 ports with 8 removable, self powered
 wd0 at atabus0 drive 0
 wd0: <HDS725050KLAT80>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 =
 sectors
 uhidev0 at uhub2 port 1 configuration 1 interface 0
 uhidev0: DELL DELL USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using =
 DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-S223Q, , SB03> cdrom =
 removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd1 at atabus1 drive 0
 wd1: <WDC WD6401AALS-00L3B2>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 =
 sectors
 ukbd0 at uhidev0
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
 DMA)
 cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using =
 DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex, playback, capture
 wskbd1 at ukbd0 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev1 at uhub2 port 1 configuration 1 interface 1
 uhidev1: DELL DELL USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/0
 boot device: wd1
 root on wd1a dumps on wd1b
 uhidev1: 2 report ids
 uhid0 at uhidev1 reportid 1: input=3D1, output=3D0, feature=3D0
 uhid1 at uhidev1 reportid 2: input=3D3, output=3D0, feature=3D0
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 disklabel wd0 =97
 
 
 # /dev/rwd0d:
 type: ESDI
 disk: HDS725050KLAT80=20
 label: fictitious
 flags:
 bytes/sector: 512
 sectors/track: 63
 tracks/cylinder: 16
 sectors/cylinder: 1008
 cylinders: 969021
 total sectors: 976773168
 rpm: 3600
 interleave: 1
 trackskew: 0
 cylinderskew: 0
 headswitch: 0          # microseconds
 track-to-track seek: 0 # microseconds
 drivedata: 0=20
 
 5 partitions:
 #        size    offset     fstype [fsize bsize cpg/sgs]
  d: 976773168         0     unused      0     0        # (Cyl.      0 - =
 969020)
  e: 976773105        63    unknown                     # (Cyl.      0*- =
 969020)
 
 
 disklabel wd1 =97
 
 
 # /dev/rwd1d:
 type: unknown
 disk: WDC WD6401AALS-
 label:=20
 flags:
 bytes/sector: 512
 sectors/track: 63
 tracks/cylinder: 16
 sectors/cylinder: 1008
 cylinders: 1240341
 total sectors: 1250263728
 rpm: 3600
 interleave: 1
 trackskew: 0
 cylinderskew: 0
 headswitch: 0          # microseconds
 track-to-track seek: 0 # microseconds
 drivedata: 0=20
 
 16 partitions:
 #        size    offset     fstype [fsize bsize cpg/sgs]
  a:  20972448        63     4.2BSD   2048 16384     0  # (Cyl.      0*-  =
 20806*)
  b:   4195296  20972511       swap                     # (Cyl.  20806*-  =
 24968*)
  c: 1250263665        63     unused      0     0        # (Cyl.      0*- =
 1240340)
  d: 1250263728         0     unused      0     0        # (Cyl.      0 - =
 1240340)
  e:  67464432  25167807     4.2BSD   2048 16384     0  # (Cyl.  24968*-  =
 91897*)
  f:  67109616  92632239     4.2BSD   2048 16384     0  # (Cyl.  91897*- =
 158474*)
  g:  20972448 159741855     4.2BSD   2048 16384     0  # (Cyl. 158474*- =
 179280*)
  h: 1048576032 180714303     4.2BSD   2048 16384     0  # (Cyl. 179280*- =
 1219534*)
  i:  20973393 1229290335     4.2BSD   2048 16384     0  # (Cyl. =
 1219534*- 1240340)
 
 
 On Nov 18, 2013, at 12:20 AM, Martin Husemann <martin%duskware.de@localhost> =
 wrote:
 
 >=20
 From: Martin Husemann <martin%duskware.de@localhost>
 To: gnats-bugs%NetBSD.org@localhost
 Cc:=20
 Subject: Re: port-amd64/48387: Boot process assigns IDE wd0 rather than =
 installed wd0 on SATA
 Date: Mon, 18 Nov 2013 09:19:46 +0100
 
 You can temporarily work around it by stopping the auto boot process
 at the bootloader (by pressing space for example) and then issue this
 boot command:
 
   boot netbsd -a
 
 which will cause the kernel to ask you for the root device.
 
 That should get you up multi-user (but of course is no solution).
 
 Please provide a few more bits of info, we need the output of:
 
  dmesg
  disklabel wd0
  disklabel wd1
  sysctl machdep.diskinfo
 
 
 Thanks,
 
 Martin=