Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot

To: port-cobalt-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,ryoon%NetBSD.org@localhost
Subject: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
Date: Sat, 2 Nov 2013 13:50:00 +0000 (UTC)

The following reply was made to PR port-cobalt/46170; it has been noted by 
GNATS.

From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
Date: Sat, 02 Nov 2013 21:31:14 +0900 (JST)

 From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>, Date: Wed, 16 Oct 2013 
00:27:24 +0900 (JST)

 > From: David Holland <dholland-bugs%NetBSD.org@localhost>, Date: Sun, 13 Oct 
 > 2013 20:30:00 +0000 (UTC)
 > 
 >> The following reply was made to PR port-cobalt/46170; it has been noted by 
 >> GNATS.
 >> 
 >> From: David Holland <dholland-bugs%netbsd.org@localhost>
 >> To: gnats-bugs%NetBSD.org@localhost
 >> Cc: 
 >> Subject: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
 >> Date: Sun, 13 Oct 2013 20:25:26 +0000
 >> 
 >>  On Sun, Mar 11, 2012 at 12:55:01AM +0000, ryoon%NetBSD.org@localhost wrote:
 >>   > NetBSD/cobalt 6.0_BETA of 2012-03-10 does not boot properly.
 >>   >   :
 >>   > root file system type: nfs
 >>   > warning: no /dev/console
 >>   > pid 1(init): ABI set to O32 (e_flags=0x1007)
 >>   > panic: init died (signal 0, exit 11)
 >>  
 >>  exit 11 from init means that it ran MAKEDEV to create /dev/console,
 >>  and MAKEDEV ran, or at least forked, but /dev/console didn't appear.
 >>  
 >>  Without a console it's difficult to figure out what happened, but
 >>  since it's an nfs root you might be able to check the following:
 >>  
 >>     - did MAKEDEV get read? (that is, did its atime change?)
 >>     - did /bin/sh get read?
 >>     - did /dev get written to? (did its mtime change?)
 >>  
 >>  Also you might get further, or at least get more ability to see what's
 >>  happening, by explicitly creating devices in the nfs root beforehand.
 > 
 > My custom Restore CD may be broken. And I cannot find old Restore CD image.
 > I will setup tftp/NFS server and try again.

 I have made new restore cd image of 2013-09-01, and it has sane /dev/*.
 I have gotten the following endless error messages.

 As described in PR/48359, http://gnats.netbsd.org/48359,
 recent NetBSD/cobalt cannot boot.
 2013-09-01 is my latest working restore cd.

 Cobalt Microserver Diagnostics - 'We serve it, you surf it'
 Built Wed Mar  3 21:26:25 PST 1999

  1.LCD Test................................PASS
  2.Controller Test.........................PASS
  5.Bank 0:.................................64M
  6.Bank 1:.................................64M
  7.Bank 2:.................................64M
  8.Bank 3:.................................64M
  9.Serial Test.............................PASS
 10.PCI Expansion Slot....................**Unknown Card**
 12.IDE Test................................PASS
 13.Ethernet Test...........................PASS
 16.RTC Test................................PASS
 Decompressing  done
 Decompressing - done.

 >> NetBSD/cobalt 6.99.23 Bootloader, Revision 1.0 (Sun Nov  3 06:03:55 JST 
 >> 2013) [@0x80f00000]
 >> Model:               Cobalt Qube 2
 >> Memory:              262144 k
 >> PROM boot string:    root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp
 Boot [nfs:netbsd]:
 Loading: nfs:netbsd
 5065840+132944 [229472+230274]=0x565cf4
 Starting at 0x80001000

 pmap_steal_memory: seg 0: 0x566 0x566 0xfffe 0xfffe
 pmap_steal_memory: seg 0: 0x59c 0x59c 0xfffe 0xfffe
 pmap_steal_memory: seg 0: 0x59e 0x59e 0xfffe 0xfffe
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

 NetBSD 6.99.23 (GENERIC) #0: Sun Nov  3 06:13:44 JST 2013

ryo_on%deuterium.ryoon.net@localhost:/usr/obj/cobalt/sys/arch/cobalt/compile/GENERIC
 Cobalt Qube 2
 total memory = 256 MB
 avail memory = 245 MB
 mainbus0 (root)
 com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
 com0: console
 cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
 cpu0: 48 TLB entries, 16MB max page size
 cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
 panel0 at mainbus0 addr 0x1f000000
 gt0 at mainbus0 addr 0x14000000
 pci0 at gt0
 pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
 tlp0: interrupting at level 1
 tlp0: Ethernet address 00:10:e0:00:5b:b3
 lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pcib0 at pci0 dev 9 function 0
 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
 viaide0 at pci0 dev 9 function 1
 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
 viaide0: primary channel interrupting at irq 14
 atabus0 at viaide0 channel 0
 viaide0: secondary channel interrupting at irq 15
 atabus1 at viaide0 channel 1
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at 
pci0 dev 9 function 2 not configured
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x61) at 
pci0 dev 10 function 0 not configured
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x61) at 
pci0 dev 10 function 1 not configured
 VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, 
revision 0x62) at pci0 dev 10 function 2 not configured
 VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, 
interface 0x10, revision 0x46) at pci0 dev 10 function 3 not configured
 tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
 tlp1: interrupting at level 2
 tlp1: Ethernet address 00:10:e0:00:55:b6
 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 wd0 at atabus0 drive 1
 wd0: <WDC WD1600AB-22DYA0>
 wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
 boot device: tlp0
 root on tlp0
 nfs_boot: trying DHCP/BOOTP
 nfs_boot: DHCP next-server: 10.0.0.254
 nfs_boot: my_domain=netbsd.org
 nfs_boot: my_addr=10.0.0.150
 nfs_boot: my_mask=255.0.0.0
 nfs_boot: gateway=10.0.0.254
 root on 10.0.0.254:/nfsroot
 root file system type: nfs
 pid 1(init): ABI set to O32 (e_flags=0x1007)
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 Process (pid 1) got sig 11
 (endless messages)

 --
 Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
 PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3

Prev by Date: kern/48360: wskbd - support for cn_magic
Next by Date: PR/48277 CVS commit: src/sys/dev/ic
Previous by Thread: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
Next by Thread: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
Indexes:

Home | Main Index | Thread Index | Old Index