Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,toby.karyadi%gmail.com@localhost
Subject: Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
From: Toby Karyadi <toby.karyadi%gmail.com@localhost>
Date: Wed, 13 Mar 2013 15:55:02 +0000 (UTC)
The following reply was made to PR kern/47594; it has been noted by GNATS.

From: Toby Karyadi <toby.karyadi%gmail.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
Date: Wed, 13 Mar 2013 11:50:47 -0400

 This is a multi-part message in MIME format.
 --------------070300040703090001090306
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 Content-Transfer-Encoding: 7bit
 
 On 3/10/13 6:45 PM, Manuel Bouyer wrote:
 > The following reply was made to PR kern/47594; it has been noted by GNATS.
 >
 > From: Manuel Bouyer <bouyer%antioche.eu.org@localhost>
 > To: gnats-bugs%netbsd.org@localhost
 > Cc: kern-bug-people%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, 
 > netbsd-bugs%netbsd.org@localhost
 > Subject: Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
 > Date: Sun, 10 Mar 2013 19:20:59 +0100
 >
 >   On Mon, Feb 25, 2013 at 07:35:00PM +0000, toby.karyadi%gmail.com@localhost 
 > wrote:
 >   > (okay, I wasn't able to get the uname -a string, since the kernel can't 
 > boot up, and I've replaced the user and host names, but other than that, 
 > it's accurate)
 >   > >Description:
 >   > I experienced a hang during boot up when the SATA disks are being 
 > detected, that is, it would pause at:
 >   >
 >   > <... more kernel messages ...>
 >   > ahcisata0: <text>
 >   > wd0 <text> <and then a long pause ~1-2minutes>
 >   > wd1 <text> <and then another long pause ~1-2minutes>
 >   > wd2 <text> <and then another long pause ~1-2minutes>
 >   > <and then the boot up just does not advance any further>
 >   >
 >   > The bug only occurred when I use the XEN3_DOM0 kernel on this particular 
 > motherboard, ASUS M2A-VM, which has an Athlon 3600 CPU and ATI SB 600 South 
 > Bridge chip. If I use the GENERIC kernel, the hang up does not occur. This 
 > problem is not reproducible on my other ASUS motherboard of the about the 
 > same vintage, ASUS M2NPV-VM, which has some NVIDIA based south bridge chip. 
 > Setting the bios setting to use IDE for the SATA disks vs using the AHCI 
 > interface did not make any difference.
 >   
 >   Can you post the dmesg of the GENERIC kernel ?
 >   also, did you look for a BIOS upgrade of this motherboard ?
 >   
 >   --
 >   Manuel Bouyer <bouyer%antioche.eu.org@localhost>
 >        NetBSD: 26 ans d'experience feront toujours la difference
 >   --
 >   
 I upgraded the bios and it didn't change the symptom. Attached are the 
 various dmesgs:
 dmesg.2012.09.23.00.28.00*.txt: version w/o problem
 dmesg.2012.09.23.00.33.00*.txt: version where the XEN3_DOM0 had the problem.
 
 
 
 
 
 --------------070300040703090001090306
 Content-Type: text/plain; charset=UTF-8;
  name="dmesg.2012.09.23.00.28.00-GENERIC.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg.2012.09.23.00.28.00-GENERIC.txt"
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.11 (GENERIC) #0: Fri Feb 22 23:40:20 EST 2013
         
bob%server01.bogus.com@localhost:/mnt/v01/build/src/current/2012.09.23.00.28.00/obj/sys/arch/amd64/compile/GENERIC
 total memory = 990 MB
 avail memory = 945 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 System manufacturer System Product Name (System Version)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 cpu1 at mainbus0 apid 1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <ATI   ,ASUSACPI,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 PMIO (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 SYSR (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPT1 (PNP0400) at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
 acpitz0 at acpi0 (THRM)ACPI Warning: For \_TZ_.THRM._PSL: Return Package has 
no elements (empty) (20110623/nspredef-507)
 
 acpitz0: active cooling level 0: 73.0C
 acpitz0: levels: critical 75.0 C, passive 73.0 C
 attimer1: attached to pcppi1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x7910 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1
 wsmux1: connecting to wsdisplay0
 wskbd0: connecting to wsdisplay0
 radeondrm0 at vga0: ATI Radeon RS690 X1250 IGP
 radeondrm0: Initialized radeon 1.29.0 20080613
 ppb1 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x01)
 re0: interrupting at ioapic0 pin 19
 re0: Ethernet address 00:1f:c6:ca:1f:40
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ahcisata0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4380 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 22
 ahcisata0: 64-bit DMA unavailable
 ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 
0xf722ff83<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 atabus3 at ahcisata0 channel 3
 ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
 ohci0: interrupting at ioapic0 pin 16
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
 ohci1: interrupting at ioapic0 pin 17
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
 ohci2: interrupting at ioapic0 pin 18
 ohci2: OHCI version 1.0, legacy support
 usb2 at ohci2: USB revision 1.0
 ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
 ohci3: interrupting at ioapic0 pin 17
 ohci3: OHCI version 1.0, legacy support
 usb3 at ohci3: USB revision 1.0
 ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
 ohci4: interrupting at ioapic0 pin 18
 ohci4: OHCI version 1.0, legacy support
 usb4 at ohci4: USB revision 1.0
 ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
 ehci0: applying AMD SB600/SB700 USB freeze workaround
 ehci0: interrupting at ioapic0 pin 19
 ehci0: dropped intr workaround enabled
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
 usb5 at ehci0: USB revision 2.0
 piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x14)
 piixpm0: interrupting at SMI, polling
 iic0 at piixpm0: I2C bus
 ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
 ixpide0: bus-master DMA support present
 ixpide0: primary channel configured to compatibility mode
 ixpide0: primary channel interrupting at ioapic0 pin 14
 atabus4 at ixpide0 channel 0
 ixpide0: secondary channel configured to compatibility mode
 ixpide0: secondary channel interrupting at ioapic0 pin 15
 atabus5 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
 ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled
 tlp0 at pci3 dev 6 function 0: DECchip 21140A Ethernet, pass 2.2
 tlp0: interrupting at ioapic0 pin 21
 tlp0: Ethernet address 00:80:c8:27:08:e7
 lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
 amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
 amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev BH-G1, 
socket AM2)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: P0: FFH, lat 100 us, pow 65000 mW, 1900 MHz
 acpicpu0: P1: FFH, lat 100 us, pow 59233 mW, 1800 MHz
 acpicpu0: P2: FFH, lat 100 us, pow 24493 mW, 1000 MHz
 acpicpu1 at cpu1: ACPI CPU
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub5: 10 ports with 10 removable, self powered
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 1: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 3.0Gb/s
 ahcisata0 port 3: device present, speed: 3.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <Hitachi HTS725050A9A364>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 wd1 at atabus1 drive 0
 wd1: <Hitachi HTS725050A9A364>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 wd2 at atabus2 drive 0
 wd2: <Hitachi HTS725050A9A364>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 wd3 at atabus3 drive 0
 wd3: <Hitachi HDS721616PLA380>
 wd3: drive supports 16-sector PIO transfers, LBA48 addressing
 wd3: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
 wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex, playback, capture
 raid0: RAID Level 5
 raid0: Components: /dev/wd0p /dev/wd2p /dev/wd1p
 raid0: Total Sectors: 1919991744 (937495 MB)
 raid0: GPT GUID: e447d6d8-74f6-11e0-9c03-001fc6ca1f40
 dk0 at raid0: zoo_v01
 dk0: 268427264 blocks at 8192, type: ffs
 dk1 at raid0: koalatu_xbd1
 dk1: 16777216 blocks at 268435456, type: ffs
 dk2 at raid0: shed_xbd1
 dk2: 33554432 blocks at 285212672, type: ffs
 dk3 at raid0: bandicoot_xbd1
 dk3: 536870912 blocks at 318767104, type: ffs
 dk4 at raid0: koalatri_xbd1
 dk4: 268435456 blocks at 855638016, type: ffs
 WARNING: double match for boot device (wd0, wd2)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 
 --------------070300040703090001090306
 Content-Type: text/plain; charset=UTF-8;
  name="dmesg.2012.09.23.00.28.00-XEN3_DOM0.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg.2012.09.23.00.28.00-XEN3_DOM0.txt"
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.11 (XEN3_DOM0) #0: Sat Feb 23 06:41:31 EST 2013
         
bob%server01.bogus.com@localhost:/mnt/v01/build/src/current/2012.09.23.00.28.00/obj/sys/arch/amd64/compile/XEN3_DOM0
 total memory = 128 MB
 avail memory = 108 MB
 mainbus0 (root)
 cpu0 at mainbus0 apid 0
 cpu1 at mainbus0 apid 1
 ioapic0 at mainbus0 apid 4
 (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
 (XEN) ioapic_guest_write: new_entry=000109f0
 (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
 (XEN) ioapic_guest_write: new_entry=000109f0
 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) irq.c:1509: dom0: pirq 0 or irq 3 already mapped
 (XEN) ioapic_guest_write: apic=0, pin=4, irq=4
 (XEN) ioapic_guest_write: new_entry=000109f1
 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) irq.c:1509: dom0: pirq 0 or irq 5 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 6 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 7 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 8 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 9 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 10 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 11 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 12 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 13 already mapped
 ioapic0: can't remap to apid 4
 hypervisor0 at mainbus0: Xen version 4.1.0
 vcpu0 at hypervisor0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 xenbus0 at hypervisor0: Xen Virtual Bus Interface
 xencons0 at hypervisor0: Xen Virtual Console Driver
 acpi0 at hypervisor0: Intel ACPICA 20110623
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 PMIO (PNP0C02) at acpi0 not configured
 TMR (PNP0100) at acpi0 not configured
 HPET (PNP0103) at acpi0 not configured
 pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
 SYSR (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPT1 (PNP0400) at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 FAN (PNP0C0B) at acpi0 not configured
 acpitz0 at acpi0 (THRM)ACPI Warning: For \_TZ_.THRM._PSL: Return Package has 
no elements (empty) (20110623/nspredef-507)
 
 acpitz0: active cooling level 0: 73.0C
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at hypervisor0 bus 0: configuration mode 1
 pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x7910 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
 pci1 at ppb0 bus 1
 vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1
 drm at vga0 not configured
 ppb1 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x01)
 re0: interrupting at ioapic0 pin 19, event channel 6
 re0: Ethernet address 00:1f:c6:ca:1f:40
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ahcisata0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4380 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 22, event channel 7
 ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 
0xf722ff83<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 atabus3 at ahcisata0 channel 3
 ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
 ohci0: interrupting at ioapic0 pin 16, event channel 8
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
 ohci1: interrupting at ioapic0 pin 17, event channel 9
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
 ohci2: interrupting at ioapic0 pin 18, event channel 10
 ohci2: OHCI version 1.0, legacy support
 usb2 at ohci2: USB revision 1.0
 ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
 ohci3: interrupting at ioapic0 pin 17, event channel 9
 ohci3: OHCI version 1.0, legacy support
 usb3 at ohci3: USB revision 1.0
 ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
 ohci4: interrupting at ioapic0 pin 18, event channel 10
 ohci4: OHCI version 1.0, legacy support
 usb4 at ohci4: USB revision 1.0
 ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
 ehci0: applying AMD SB600/SB700 USB freeze workaround
 ehci0: interrupting at ioapic0 pin 19, event channel 6
 ehci0: dropped intr workaround enabled
 ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
 usb5 at ehci0: USB revision 2.0
 vendor 0x1002 product 0x4385 (SMBus serial bus, revision 0x14) at pci0 dev 20 
function 0 not configured
 ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
 ixpide0: primary channel interrupting at ioapic0 pin 14, event channel 11
 atabus4 at ixpide0 channel 0
 ixpide0: secondary channel interrupting at ioapic0 pin 15, event channel 12
 atabus5 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
 ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
 pci3 at ppb2 bus 3
 tlp0 at pci3 dev 6 function 0: DECchip 21140A Ethernet, pass 2.2
 tlp0: interrupting at ioapic0 pin 21, event channel 13
 tlp0: Ethernet address 00:80:c8:27:08:e7
 lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
 amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
 amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev BH-G1, 
socket AM2)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 1: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 3.0Gb/s
 ahcisata0 port 3: device present, speed: 3.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <Hitachi HTS725050A9A364>
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd1 at atabus1 drive 0
 wd1: <Hitachi HTS725050A9A364>
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd2 at atabus2 drive 0
 wd2: <Hitachi HTS725050A9A364>
 wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd3 at atabus3 drive 0
 wd3: <Hitachi HDS721616PLA380>
 wd3: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
 raid0: RAID Level 5
 raid0: Components: /dev/wd0p /dev/wd2p /dev/wd1p
 raid0: Total Sectors: 1919991744 (937495 MB)
 dk0 at raid0: zoo_v01
 dk0: 268427264 blocks at 8192, type: ffs
 dk1 at raid0: koalatu_xbd1
 dk1: 16777216 blocks at 268435456, type: ffs
 dk2 at raid0: shed_xbd1
 dk2: 33554432 blocks at 285212672, type: ffs
 dk3 at raid0: bandicoot_xbd1
 dk3: 536870912 blocks at 318767104, type: ffs
 dk4 at raid0: koalatri_xbd1
 dk4: 268435456 blocks at 855638016, type: ffs
 boot device: wd0
 root on wd0a dumps on wd0b
 Your machine does not initialize mem_clusters; sparse_dumps disabled
 root file system type: ffs
 
 --------------070300040703090001090306
 Content-Type: text/plain; charset=UTF-8;
  name="dmesg.2012.09.23.00.33.00-GENERIC.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg.2012.09.23.00.33.00-GENERIC.txt"
 
 WARNING: couldn't open ffs (/stand/amd64/6.99.11/modules/ffs/ffs.kmod)
 WARNING: 1 module failed to load
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.11 (GENERIC) #0: Fri Feb 22 17:23:04 EST 2013
         
bob%server01.bogus.com@localhost:/mnt/v01/build/src/current/2012.09.23.00.33.00/obj/sys/arch/amd64/compile/GENERIC
 total memory = 990 MB
 avail memory = 945 MB
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 cpu1 at mainbus0 apid 1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 ioapic0 at mainbus0 apid 4
 acpi0 at mainbus0: Intel ACPICA 20110623
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 PMIO (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 SYSR (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPT1 (PNP0400) at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
 acpitz0 at acpi0 (THRM)ACPI Warning: For \_TZ_.THRM._PSL: Return Package has 
no elements (empty) (20110623/nspredef-507)
 
 acpitz0: active cooling level 0: 73.0C
 attimer1: attached to pcppi1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x7910 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
 pci1 at ppb0 bus 1
 vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1
 radeondrm0 at vga0: ATI Radeon RS690 X1250 IGP
 radeondrm0: Initialized radeon 1.29.0 20080613
 ppb1 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x01)
 re0: interrupting at ioapic0 pin 19
 re0: Ethernet address 00:1f:c6:ca:1f:40
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ahcisata0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4380 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 22
 ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 
0xf722ff83<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 atabus3 at ahcisata0 channel 3
 ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
 ohci0: interrupting at ioapic0 pin 16
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
 ohci1: interrupting at ioapic0 pin 17
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
 ohci2: interrupting at ioapic0 pin 18
 ohci2: OHCI version 1.0, legacy support
 usb2 at ohci2: USB revision 1.0
 ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
 ohci3: interrupting at ioapic0 pin 17
 ohci3: OHCI version 1.0, legacy support
 usb3 at ohci3: USB revision 1.0
 ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
 ohci4: interrupting at ioapic0 pin 18
 ohci4: OHCI version 1.0, legacy support
 usb4 at ohci4: USB revision 1.0
 ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
 ehci0: applying AMD SB600/SB700 USB freeze workaround
 ehci0: interrupting at ioapic0 pin 19
 ehci0: dropped intr workaround enabled
 ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
 usb5 at ehci0: USB revision 2.0
 piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x14)
 piixpm0: interrupting at SMI, polling
 iic0 at piixpm0: I2C bus
 ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
 ixpide0: primary channel interrupting at ioapic0 pin 14
 atabus4 at ixpide0 channel 0
 ixpide0: secondary channel interrupting at ioapic0 pin 15
 atabus5 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
 ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
 pci3 at ppb2 bus 3
 tlp0 at pci3 dev 6 function 0: DECchip 21140A Ethernet, pass 2.2
 tlp0: interrupting at ioapic0 pin 21
 tlp0: Ethernet address 00:80:c8:27:08:e7
 lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
 amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
 amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev BH-G1, 
socket AM2)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 acpicpu0 at cpu0: ACPI CPU
 acpicpu1 at cpu1: ACPI CPU
 uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub5 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 1: device present, speed: 3.0Gb/s
 ahcisata0 port 3: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 3.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <Hitachi HTS725050A9A364>
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd1 at atabus1 drive 0
 wd1: <Hitachi HTS725050A9A364>
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd2 at atabus2 drive 0
 wd2: <Hitachi HTS725050A9A364>
 wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd3 at atabus3 drive 0
 wd3: <Hitachi HDS721616PLA380>
 wd3: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex, playback, capture
 raid0: RAID Level 5
 raid0: Components: /dev/wd0p /dev/wd2p /dev/wd1p
 raid0: Total Sectors: 1919991744 (937495 MB)
 dk0 at raid0: zoo_v01
 dk0: 268427264 blocks at 8192, type: ffs
 dk1 at raid0: koalatu_xbd1
 dk1: 16777216 blocks at 268435456, type: ffs
 dk2 at raid0: shed_xbd1
 dk2: 33554432 blocks at 285212672, type: ffs
 dk3 at raid0: bandicoot_xbd1
 dk3: 536870912 blocks at 318767104, type: ffs
 dk4 at raid0: koalatri_xbd1
 dk4: 268435456 blocks at 855638016, type: ffs
 WARNING: double match for boot device (wd0, wd2)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 
 --------------070300040703090001090306
 Content-Type: text/plain; charset=UTF-8;
  name="dmesg.2012.09.23.00.33.00-XEN3_DOM0.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg.2012.09.23.00.33.00-XEN3_DOM0.txt"
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.11 (XEN3_DOM0) #0: Fri Feb 22 16:57:44 EST 2013
         
bob%server01.bogus.com@localhost:/mnt/v01/build/src/current/2012.09.23.00.33.00/obj/sys/arch/amd64/compile/XEN3_DOM0
 total memory = 128 MB
 avail memory = 108 MB
 mainbus0 (root)
 cpu0 at mainbus0 apid 0
 cpu1 at mainbus0 apid 1
 ioapic0 at mainbus0 apid 4
 (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
 (XEN) ioapic_guest_write: new_entry=000109f0
 (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
 (XEN) ioapic_guest_write: new_entry=000109f0
 (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) irq.c:1509: dom0: pirq 0 or irq 3 already mapped
 (XEN) ioapic_guest_write: apic=0, pin=4, irq=4
 (XEN) ioapic_guest_write: new_entry=000109f1
 (XEN) ioapic_guest_write: old_entry=000009f1 pirq=0
 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
 (XEN) irq.c:1509: dom0: pirq 0 or irq 5 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 6 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 7 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 8 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 9 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 10 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 11 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 12 already mapped
 (XEN) irq.c:1509: dom0: pirq 0 or irq 13 already mapped
 ioapic0: can't remap to apid 4
 hypervisor0 at mainbus0: Xen version 4.1.0
 vcpu0 at hypervisor0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+, id 
0x60fb1
 xenbus0 at hypervisor0: Xen Virtual Bus Interface
 xencons0 at hypervisor0: Xen Virtual Console Driver
 acpi0 at hypervisor0: Intel ACPICA 20110623
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 PMIO (PNP0C02) at acpi0 not configured
 TMR (PNP0100) at acpi0 not configured
 HPET (PNP0103) at acpi0 not configured
 pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
 SYSR (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPT1 (PNP0400) at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 FAN (PNP0C0B) at acpi0 not configured
 acpitz0 at acpi0 (THRM)ACPI Warning: For \_TZ_.THRM._PSL: Return Package has 
no elements (empty) (20110623/nspredef-507)
 
 acpitz0: active cooling level 0: 73.0C
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at hypervisor0 bus 0: configuration mode 1
 pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x7910 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
 pci1 at ppb0 bus 1
 vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1
 drm at vga0 not configured
 ppb1 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x01)
 re0: interrupting at ioapic0 pin 19, event channel 6
 re0: Ethernet address 00:1f:c6:ca:1f:40
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ahcisata0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4380 (rev. 0x00)
 ahcisata0: interrupting at ioapic0 pin 22, event channel 7
 ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 
0xf722ff83<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 atabus3 at ahcisata0 channel 3
 ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
 ohci0: interrupting at ioapic0 pin 16, event channel 8
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
 ohci1: interrupting at ioapic0 pin 17, event channel 9
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
 ohci2: interrupting at ioapic0 pin 18, event channel 10
 ohci2: OHCI version 1.0, legacy support
 usb2 at ohci2: USB revision 1.0
 ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
 ohci3: interrupting at ioapic0 pin 17, event channel 9
 ohci3: OHCI version 1.0, legacy support
 usb3 at ohci3: USB revision 1.0
 ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
 ohci4: interrupting at ioapic0 pin 18, event channel 10
 ohci4: OHCI version 1.0, legacy support
 usb4 at ohci4: USB revision 1.0
 ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
 ehci0: applying AMD SB600/SB700 USB freeze workaround
 ehci0: interrupting at ioapic0 pin 19, event channel 6
 ehci0: dropped intr workaround enabled
 ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
 usb5 at ehci0: USB revision 2.0
 vendor 0x1002 product 0x4385 (SMBus serial bus, revision 0x14) at pci0 dev 20 
function 0 not configured
 ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
 ixpide0: primary channel interrupting at ioapic0 pin 14, event channel 11
 atabus4 at ixpide0 channel 0
 ixpide0: secondary channel interrupting at ioapic0 pin 15, event channel 12
 atabus5 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
 ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
 pci3 at ppb2 bus 3
 tlp0 at pci3 dev 6 function 0: DECchip 21140A Ethernet, pass 2.2
 tlp0: interrupting at ioapic0 pin 21, event channel 13
 tlp0: Ethernet address 00:80:c8:27:08:e7
 lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
 amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
 amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev BH-G1, 
socket AM2)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 ahcisata0 port 3: device present, speed: 3.0Gb/s
 uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 1: device present, speed: 3.0Gb/s
 ahcisata0 port 2: device present, speed: 3.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <Hitachi HTS725050A9A364>
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 aibs0: warning under limit on 'CPU FAN Speed'
 aibs0: warning under limit on 'POWER FAN Speed'
 wd1 at atabus1 drive 0
 wd1: <Hitachi HTS725050A9A364>
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd2 at atabus2 drive 0
 wd2: <Hitachi HTS725050A9A364>
 wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd3 at atabus3 drive 0
 wd3: <Hitachi HDS721616PLA380>
 wd3: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
 
 --------------070300040703090001090306--
Follow-Ups:
- Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
  - From: Manuel Bouyer
Prev by Date: PR/47144 CVS commit: src/share/man/man3
Next by Date: NetBSD Nightly Trouble Ticket Report
Previous by Thread: Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
Next by Thread: Re: kern/47594: Hang during boot on Xen + CURRENT/6.01 + ASUS M2A-VM
Indexes:
Home | Main Index | Thread Index | Old Index