install/47344: NetBSD installation CD failed to boot

[wood_elf%126.com@localhost]

>Number:         47344
>Category:       install
>Synopsis:       NetBSD installation CD failed to boot
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    install-manager
>State:          open
>Class:          support
>Submitter-Id:   net
>Arrival-Date:   Mon Dec 17 02:20:00 +0000 2012
>Originator:     woodelf
>Release:        NetBSD 6.0
>Organization:
>Environment:
>Description:
I have a laptop ASUS N73SV, with Intel Sandy Bridge CPU. I want to install 
NetBSD on it. I tried NetBSD 5.2, NetBSD 6.0, and several -current versions, 
but none of the installation CDs were able to boot. After kernel loading 
finished, my laptop just reboot immediately, without ddb output, so I am nor 
able to take a photo or offer any error message. I even tried boot kernel with 
-12s, the same thing happened again.

Here is my detailed hardware environment below:

CPU: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
Chipset: Intel HM65
Audio: Realtek ALC269
Graphics card: Intel HD 3000 + Nvidia GT540M
HDD: Seagate ST9750420AS (698 GB)
LAN: Atheros AR8151 PCI-E Gigabit Ethernet Controller (alc)
WLAN: Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter (athn)

And below is the dmesg from OpenBSD 5.2:

deraadt%amd64.openbsd.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12790538240 (12198MB)
avail mem = 12435931136 (11859MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeba10 (101 entries)
bios0: vendor American Megatrends Inc. version "N73SV.306" date 08/18/2011
bios0: ASUSTeK Computer Inc. N73SV
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.73 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
mpbios0: bus 0 is type PCI  
mpbios0: bus 1 is type PCI  
mpbios0: bus 2 is type PCI  
mpbios0: bus 3 is type PCI  
mpbios0: bus 4 is type PCI  
mpbios0: bus 5 is type PCI  
mpbios0: bus 6 is type ISA  
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
vendor "NVIDIA", unknown product 0x0df4 (class display subclass VGA, rev 0xa1) 
at pci1 dev 0 function 0 not configured
vga1 at pci0 dev 2 function 0 "Intel GT2 Video" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 74:2f:68:1e:54:c8
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 4
unknown vendor 0x1b73 product 0x1000 (class serial bus subclass USB, rev 0x04) 
at pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: msi
pci5 at ppb4 bus 5
alc0 at pci5 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, address 
f4:6d:04:f4:1a:ab
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0002> SCSI3 0/direct fixed 
naa.5000c500385c997a
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed 
naa.5000c5003d0386fc
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 2 lun 0: <Slimtype, DVD A DS8A5SH, XAA2> ATAPI 5/cdrom 
removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "AsureWave product 0x3304" rev 1.10/0.01 addr 3
uvideo0 at uhub2 port 2 configuration 1 interface 0 "Azurewave USB2.0 UVC 2M 
WebCam" rev 2.00/12.13 addr 4
video0 at uvideo0
ugen1 at uhub2 port 5 "Broadcom Corp BT-270" rev 2.00/2.54 addr 5
uhub3 at uhub1 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
uhub4 at uhub3 port 1 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr 3
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/16.00 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/16.00 addr 4
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (750aeb69335b14b4.a) swap on sd0b dump on sd0b
>How-To-Repeat:
I suppose this problem only appears on ASUS N73SV, I found others with Sandy 
Bridge could run NetBSD well.
>Fix: