Re: kern/46929: SD micro in SD adapter does not work

[Andrius V <vezhlys%gmail.com@localhost>]

The following reply was made to PR kern/46929; it has been noted by GNATS.

From: Andrius V <vezhlys%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: kern-bug-people%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, 
netbsd-bugs%netbsd.org@localhost
Subject: Re: kern/46929: SD micro in SD adapter does not work
Date: Sun, 9 Sep 2012 19:14:12 +0300

 Have actually tried to mount your sd card? I am getting the same
 output like you but I can still to mount it as /dev/sd3d in my card
 reader (SD card readers usually have several slots and it can be that
 your sd card can be attached not to sd0 but to sd1, 2 or 3). Though I
 don't know what this output actually means.
 
 On Sun, Sep 9, 2012 at 2:05 AM,  <diro%nixsyspaus.org@localhost> wrote:
 >>Number:         46929
 >>Category:       kern
 >>Synopsis:       SD micro in SD adapter does not work
 >>Confidential:   no
 >>Severity:       serious
 >>Priority:       medium
 >>Responsible:    kern-bug-people
 >>State:          open
 >>Class:          sw-bug
 >>Submitter-Id:   net
 >>Arrival-Date:   Sat Sep 08 23:05:00 +0000 2012
 >>Originator:     diro%nixsyspaus.org@localhost
 >>Release:        NetBSD 6.0_RC1
 >>Organization:
 >>Environment:
 > System: NetBSD gift 6.0_RC1 NetBSD 6.0_RC1 (GIFT) #6: Sat Sep  1 04:44:23 UTC
 > 2012  root@gift:/usr/obj/sys/arch/amd64/compile/GIFT amd64
 > Architecture: amd64
 > Machine: amd64
 >>Description:
 >
 > This is an SD micro card in an SD adapter:
 >
 > umass0 at uhub3 port 2 configuration 1 interface 0
 > umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 2
 > umass0: using SCSI over Bulk-Only
 > scsibus0 at umass0: 2 targets, 1 lun per target
 > sd0 at scsibus0 target 0 lun 0: <Multiple, Card  Reader, 1.00> disk removable
 > sd0: drive offline
 > sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
 >     SENSE KEY:  Not Ready
 >  COMMAND INFO:  11162945 (0xaa5541)
 >      ASC/ASCQ:  Medium Not Present
 >
 > sd0: unable to open device, error = 19
 >
 > Now, you might say the adapter is broke. Tested three or four adapters with
 > different SD micro cards to be sure. The SD micro cards were for sure 
 > working.
 > Although some of the SD adapters were questionable, some of them were still
 > known to work.
 >
 > I thought this may have been a problem with the device itself, which is why i
 > didn't bother reporting it until i found a normal SD card. The SD card works
 > fine. sd0 attaches and i can read/write to the drive, so it's not the device.
 >
 > Dmesg is in PR pkg/46919.
 >
 >>How-To-Repeat:
 > Put an SD micro card in an SD adapter. Insert it into SD slot. `dmesg | tail`
 >>Fix:
 >
 >