Re: port-i386/46884: Compaq Armada E500 not booting 6.0 RC1

[Robert Doerfler <rodo%bloerp.de@localhost>]

The following reply was made to PR port-i386/46884; it has been noted by GNATS.

From: Robert Doerfler <rodo%bloerp.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-i386/46884: Compaq Armada E500 not booting 6.0 RC1
Date: Tue, 4 Sep 2012 12:00:27 +0200

 Hi,
 
 * Jeff Rizzo <riz%netbsd.org@localhost> [120901 18:35]:
 > The following reply was made to PR port-i386/46884; it has been noted by 
 > GNATS.
 > 
 > From: Jeff Rizzo <riz%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: rodo%bloerp.de@localhost, port-i386-maintainer%netbsd.org@localhost, 
 >  netbsd-bugs%netbsd.org@localhost
 > Subject: Re: port-i386/46884: Compaq Armada E500 not booting 6.0 RC1
 > Date: Sat, 01 Sep 2012 09:34:10 -0700
 > 
 >  On 8/31/12 2:45 AM, rodo%bloerp.de@localhost wrote:
 >  >> Number:         46884
 >  >> Category:       port-i386
 >  >> Synopsis:       Compaq Armada E500 not booting 6.0 RC1
 >  >>
 >  > Compaq Armada E500 stops booting with:
 >  >
 >  > esm0: ac97: ext id 0x8080(SECONDARY,SDAC)
 >  > uvm_fault(0xc0c8d960, 0x4000, 1) -> 0xe
 >  > fatal page fault in supervisor mode
 >  > trag type 6 code 0 eip c077efb3 cs 8 eflags 10282 cr2 4b26 ilevel 8
 >  > kernel: supervisor trag page fault, code=0
 >  > Stopped in pid 0.1 (system) at  netbsd:config_cf_driver_lookup+0x1e:  
 > cmpb%
 >  > dl,0(%eax)
 >  >
 >  >
 >  > ( old dmesg of 5.1.2 -> http://www.bloerp.de/temp/dmesg.armada.txt )
 >  >
 >  >
 >  
 >  Can you try disabling the esm(4) driver with userconf and booting 
 >  again?  I want to narrow down the crash before I start looking.
 >  
 >   From the boot prompt, type "boot -c" to enter userconf, then "disable 
 >  esm" and "quit" to boot without esm(4) support, and let us know what 
 >  happens.
 
 It works without esm.