Re: port-sparc/46530: Install failure of NetBSD/sparc 5.1.2 and 6.0_BETA2 on qemu-1.0.1 and 1.1.0

[Martin Husemann <martin%duskware.de@localhost>]

The following reply was made to PR port-sparc/46530; it has been noted by GNATS.

From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-sparc/46530: Install failure of NetBSD/sparc 5.1.2 and 
6.0_BETA2 on qemu-1.0.1 and 1.1.0
Date: Wed, 6 Jun 2012 09:18:54 +0200

 With more debugging in the driver enabled:
 
 [ncr53c9x_scsipi_request] [0x8, 6]->0 [ncr53c9x_sched] 
[ncr53c9_select(t0,l0,cmd:8,tag:0,0)] DATA_IN_PHASE STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] 
 [ncr53c9x_scsipi_request] [0x8, 6]->0 [ncr53c9x_sched] 
[ncr53c9_select(t0,l0,cmd:8,tag:0,0)] DATA_IN_PHASE STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] 
 [ncr53c9x_scsipi_request] [0x8, 6]->0 [ncr53c9x_sched] 
[ncr53c9_select(t0,l0,cmd:8,tag:0,0)] DATA_IN_PHASE STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched]
 DATA_IN_PHASE STATUS_PHASE <stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 OUT_PHASE [8192] STATUS_PHASE <stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 OUT_PHASE [8192] STATUS_PHASE <stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 IN_PHASE STATUS_PHASE <stat:(0,0)>[ncr53c9x_done(error:0)] error=0 
 [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [8192] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [8192] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [8192] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [8192] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [8192] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [1024] STATSTATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [512] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:35,tag:0,0)] (esp0:0:0): select; 11 left in DMA 
buffer [intr 18, stat 87, step 4]
 MESSAGE_IN_PHASE STATUS_PHASE <stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:35,tag:0,0)] esp0: unexpected status after select: 
[intr 10, stat 93, step 0]
 [NCR_INIT(1) 2] [ncr53c9x_done(error:6)] error=6
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:35,tag:0,0)] esp0: unexpected status after select: 
[intr 10, stat 93, step 0]
 [NCR_INIT(1) 2] [ncr53c9x_done(error:6)] error=6
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:35,tag:0,0)] esp0: unexpected status after select: 
[intr 10, stat 93, step 0]
 [NCR_INIT(1) 2] [ncr53c9x_done(error:6)] error=6
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0 
[nc[ncr53c9x_scsipi_request] [0xa, 6]->0 [ncr53c9x_sched] 
[ncr53c9x_select(t0,l0,cmd:a,tag:0,0)] DATA_OUT_PHASE [512] STATUS_PHASE 
<stat:(0,0)>[ncr53c9x_done(error:0)] error=0
 [ncr53c9x_sched] [ncr53c9x_scsipi_request] [0x35, 10]->0
 
 
 (hope I didn't mangle something when extracting this from the log manually)
 
 Martin