port-sparc/46530: Install failure of NetBSD/sparc 5.1.2 and 6.0_BETA2 on qemu-1.0.1 and 1.1.0

To: port-sparc-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-sparc/46530: Install failure of NetBSD/sparc 5.1.2 and 6.0_BETA2 on qemu-1.0.1 and 1.1.0
From: ryoon%NetBSD.org@localhost
Date: Sun, 3 Jun 2012 09:20:03 +0000 (UTC)
>Number:         46530
>Category:       port-sparc
>Synopsis:       Install failure of NetBSD/sparc 5.1.2 and 6.0_BETA2 on 
>qemu-1.0.1 and 1.1.0
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    port-sparc-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Jun 03 09:20:03 +0000 2012
>Originator:     Ryo ONODERA
>Release:        NetBSD 6.99.7
>Organization:
        
>Environment:
        
        
System: NetBSD hydrogen.elements.tetera.org 6.99.7 NetBSD 6.99.7 (LEAFGIRLC) 
#3: Sat May 19 14:13:12 JST 2012 
root%hydrogen.elements.tetera.org@localhost:/usr/obj/sys/arch/i386/compile/LEAFGIRLC
 i386
Architecture: i386
Machine: i386
>Description:
Installing NetBSD/sparc 5.1.2 and 6.0_BETA2 to qemu-1.0.1 and 1.1.0 fails.
With qemu-0.15.1, 5.1.2 works fine (6.0_BETA2 is not tested).

My disk image is created with the following command.
% qemu-img create -f qcow2 3GB_2.img 3G

I have gotten
disklabel: warning, partition b: not starting on cylinder boundary
message, when disklabel is invoked from sysinst.

And with already-installed NetBSD/sparc 5.1 image on qemu-1.1.0,
I have gotten the following errors.

* In dmesg (6.0_BETA2)
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0542f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0542f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN

cd0 at scsibus0 target 2 lun 0: <QEMU, QEMU CD-ROM, 1.1.> cdrom removable
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0542f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0542f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN

* On console (6.0_BETA2)
esp0: unexpected status after select: [intr 10, stat 93, step 0]
esp0: unexpected status after select: [intr 10, stat 93, step 0]
(repeated)

And the following is dmesg of 5.1.2 and 6.0_BETA2.

* NetBSD/sparc 5.1.2 on qemu-1.1.0

% qemu-system-sparc -M SS-10 -m 128M -cdrom sparccd-5.1.2.iso -hda 3GB_2.img 
-boot d -nographic
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0: baud rate 76800
ms0 at zs1 channel 1: baud rate 76800
fdc0 at obio0 slot 0 offset 0x700000 level 11: no drives attached
auxreg0 at obio0 slot 0 offset 0x800000
power0 at obio0 slot 0 offset 0xa01000 level 2
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x0, page-size 4096, range 
64MB
sbus0 at iommu0: clock = 21.250 MHz
tcx0 at sbus0 slot 2 offset 0x800000 level 5 (ipl 9): SUNW,tcx, 1024 x 768, id 
0, rev 0, sense 0
tcx0: attached to /dev/fb0
dma0 at sbus0 slot 15 offset 0x400000: DMA rev 2
esp0 at dma0 slot 15 offset 0x800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
ledma0 at sbus0 slot 15 offset 0x400010: DMA rev 2
le0 at ledma0 slot 15 offset 0xc00000 level 6: address 52:54:00:12:34:56
le0: 8 receive buffers, 2 transmit buffers
power-management at sbus0 slot 15 offset 0xa000000 not configured
eccmemctl0 at mainbus0 ioaddr 0x0: version 0x0/0x1
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.1.> disk fixed
sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0542f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0542f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers
cd0 at scsibus0 target 2 lun 0: <QEMU, QEMU CD-ROM, 1.1.> cdrom removable
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0542f88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0542f88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf0542f88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
cd0: async, 8-bit transfers
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 121 days
WARNING: CHECK AND RESET THE DATE!
Welcome to the NetBSD/sparc microroot setup utility.

We've just completed the first stage of a two-stage procedure to load a
fully functional NetBSD installation environment on your machine.  In the
second stage which is to follow now, a set of additional installation
utilities must be load from your NetBSD/sparc installation medium.

This procedure supports one of the following media:

1) cdrom
2) tape
3) floppy

Installation medium to load the additional utilities from:

* NetBSD/sparc 6.0_BETA2 on qemu-1.1.0


% qemu-system-sparc -M SS-10 -m 128M -cdrom NetBSD-6.0_BETA2-sparc.iso -hda 
3GB_2.img -boot d -nographic
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
zstty2 at zs1 channel 0
zstty3 at zs1 channel 1
fdc0 at obio0 slot 0 offset 0x700000 level 11: no drives attached
auxreg0 at obio0 slot 0 offset 0x800000
power0 at obio0 slot 0 offset 0xa01000 level 2
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x0, page-size 4096, range 
64MB
sbus0 at iommu0: clock = 21.250 MHz
genfb0 at sbus0 slot 2 offset 0x800000 level 5 (ipl 9)
genfb0: 1024 x 768 at 8 bit
genfb0: framebuffer at offset 0x0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA2 (INSTALL)
total memory = 111 MB
avail memory = 106 MB
timecounter: Timecounters tick every 10.000 msec
bootpath: /iommu0/sbus0/espdma0/esp0/sd@2,0:d
mainbus0 (root): SUNW,SPARCstation-10: hostid 72000000
cpu0 at mainbus0: TMS390Z50 v0 or TMS390Z55 @ 170 MHz, on-chip FPU
cpu0: physical 20K instruction (64 b/l), 16K data (32 b/l), 1024K external (32 
b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08
timer0 at obio0 slot 0 offset 0x300000: delay constant 1, frequency = 1000000 Hz
timecounter: Timecounter "timer-counter" frequency 1000000 Hz quality 100
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
zstty2 at zs1 channel 0
zstty3 at zs1 channel 1
fdc0 at obio0 slot 0 offset 0x700000 level 11: no drives attached
auxreg0 at obio0 slot 0 offset 0x800000
power0 at obio0 slot 0 offset 0xa01000 level 2
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x0, page-size 4096, range 
64MB
sbus0 at iommu0: clock = 21.250 MHz
genfb0 at sbus0 slot 2 offset 0x800000 level 5 (ipl 9)
genfb0: 1024 x 768 at 8 bit
genfb0: framebuffer at offset 0x0
genfb0: framebuffer at 0xfe027000, size 1024x768, depth 8, stride 1024
wsdisplay1 at genfb0 kbdmux 1
dma0 at sbus0 slot 15 offset 0x400000: DMA rev 2
esp0 at dma0 slot 15 offset 0x800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
ledma0 at sbus0 slot 15 offset 0x400010: DMA rev 2
le0 at ledma0 slot 15 offset 0xc00000 level 6: address 52:54:00:12:34:56
le0: 8 receive buffers, 2 transmit buffers
power-management at sbus0 slot 15 offset 0xa000000 not configured
eccmemctl0 at mainbus0 ioaddr 0x0: version 0x0/0x1
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 1.1.> disk fixed
sd0: 3072 MB, 6241 cyl, 16 head, 63 sec, 512 bytes/sect x 6291456 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf061af88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf061af88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf061af88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf061af88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
sd0: async, 8-bit transfers
cd0 at scsibus0 target 2 lun 0: <QEMU, QEMU CD-ROM, 1.1.> cdrom removable
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf061af88 (flags 0x1, dleft 0, stat 0)], 
<state 2, nexus 0xf061af88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf061af88 (flags 0x41, dleft 0, stat 
0)], <state 2, nexus 0xf061af88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) 
> AGAIN
cd0: async, 8-bit transfers
root on md0a dumps on md0b
root file system type: ffs
Welcome to the NetBSD/sparc microroot setup utility.

We've just completed the first stage of a two-stage procedure to load a
fully functional NetBSD installation environment on your machine.  In the
second stage which is to follow now, a set of additional installation
utilities must be load from your NetBSD/sparc installation medium.

This procedure supports one of the following media:

1) cdrom
2) tape
3) floppy

Installation medium to load the additional utilities from:

        
>How-To-Repeat:
See above dmesg section.

qemu-1.1.0 is available via pkgsrc/wip/qemu.
I have tested on NetBSD/i386 5.99.7.
        
>Fix:
        
I have no idea, please fix.


>Unformatted:
Prev by Date: PR/46463 CVS commit: [netbsd-5-1] src/sys/kern
Next by Date: Re: kern/46526: Driver support needed for DVD writer
Previous by Thread: PR/46463 CVS commit: [netbsd-5-1] src/sys/kern
Next by Thread: Re: port-sparc/46530: Install failure of NetBSD/sparc 5.1.2 and 6.0_BETA2 on qemu-1.0.1 and 1.1.0
Indexes:
Home | Main Index | Thread Index | Old Index