port-i386/46203: NetBSD 6.0_BETA fails to install on i386

[cryintothebluesky%googlemail.com@localhost]

>Number:         46203
>Category:       port-i386
>Synopsis:       NetBSD 6.0_BETA fails to install on i386
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Mar 15 21:00:00 +0000 2012
>Originator:     Sad Clouds
>Release:        NetBSD 6.0_BETA
>Organization:
>Environment:
>Description:
I have just downloaded i386 iso from:
http://ftp.netbsd.org/pub/NetBSD/NetBSD-6.0_BETA/iso/

Tried booting from CD, but as soon as the kernel loads, it displays the
following:

vfs_mountroot: can't open root device
cannot mount root, error = 6
root device (default cd0a):

At this point if I hit Enter key, kernel goes into infinite loop
printing the following message:

uhci_idone: ii=0xc36482c0 is done!

On the same machine I can boot NetBSD-5.1.1 CD without any issues. Below is the 
output of dmesg when booting with NetBSD-5.1.1

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.1 (GENERIC) #0: Tue Jan 17 02:20:38 UTC 2012
        root@atom:/opt/obj.i386/sys/arch/i386/compile/GENERIC
total memory = 2047 MB
avail memory = 1993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
American Megatrends Inc. VIA694X/686A (0000000)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1129MHz, id 0x6b1
cpu1 at mainbus0 apid 1: Intel 686-class, 1129MHz, id 0x6b1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <AMIINT,        ,00000010>, AslId <MSFT,00000099>
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 9
acpi0: SCI interrupting at int 11
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (THRM): critical 79.0C passive 30.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0691 (rev. 0xc4)
agp0 at pchb0 (v2): aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x10de product 0x0171 (rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x40)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x1a)
uhci0: interrupting at ioapic0 pin 9
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3038 (rev. 0x1a)
uhci1: interrupting at ioapic0 pin 9
usb1 at uhci1: USB revision 1.0
vendor 0x1106 product 0x3057 (SMBus serial bus, revision 0x40) at pci0 dev 7 
function 4 not configured
pdcide0 at pci0 dev 9 function 0
pdcide0: Promise Ultra100TX2/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using ioapic0 pin 17 for native-PCI interrupt
atabus2 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus3 at pdcide0 channel 1
ohci0 at pci0 dev 10 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ohci1 at pci0 dev 10 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at ioapic0 pin 19
ohci1: OHCI version 1.0, legacy support
usb3 at ohci1: USB revision 1.0
ehci0 at pci0 dev 10 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb4 at ehci0: USB revision 2.0
vendor 0x108e product 0x1000 (miscellaneous bridge, revision 0x01) at pci0 dev 
11 function 0 not configured
hme0 at pci0 dev 11 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ioapic0 pin 16
hme0: Ethernet address 08:00:20:a1:df:fd
qsphy0 at hme0 phy 1: QS6612 10/100 media interface, rev. 1
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 12 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16
rtk0: Ethernet address 00:40:f4:c0:32:43
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <JLMS XJ-HD166S, , DS19> cdrom removable
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub3 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
wd0 at atabus1 drive 0: <ST3200822A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus1 drive 1: <ST340016A>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x04d9 product 0x1504, rev 1.10/1.60, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
Too many symbols for tree, skipping 4874 symbols
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 58 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
>How-To-Repeat:

>Fix: