port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot

[ryoon%NetBSD.org@localhost]

>Number:         46170
>Category:       port-cobalt
>Synopsis:       NetBSD/cobalt 6.0_BETA does not boot
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-cobalt-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Mar 11 00:55:01 +0000 2012
>Originator:     Ryo ONODERA
>Release:        NetBSD 6.0_BETA
>Organization:
        
>Environment:
        
        
System: NetBSD/cobalt 6.0_BETA
>Description:
NetBSD/cobalt 6.0_BETA of 2012-03-10 does not boot properly.
I have made NetBSD/cobalt Restore CD and try to boot from it.

dmesg is here.

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test..............................**NOT FOUND**
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................0M
 7.Bank 2:.................................0M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Decompressing -- done.

>> NetBSD/cobalt 5.1 Bootloader, Revision 0.9 [@0x80f00000]
>> (builds%b8.netbsd.org@localhost, Sat Nov  6 14:35:01 UTC 2010)
>> Model:               Cobalt Qube 2
>> Memory:              65536 k
>> PROM boot string:    root=/dev/hda1 ro
Boot [wd0a:netbsd]: Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................0M
 7.Bank 2:.................................0M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Executing bootloader kernel...
Decompressing -- done.

>> NetBSD/cobalt 6.0_BETA Bootloader, Revision 1.0 (Sun Mar 11 09:55:39 JST 
>> 2012) [@0x80f00000]
>> Model:               Cobalt Qube 2
>> Memory:              65536 k
>> PROM boot string:    root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp
Boot [nfs:netbsd]:
Loading: nfs:netbsd
4495216+150208 [226480+224952]=0x4dcb28
Starting at 0x80001000

pmap_steal_memory: seg 0: 0x4dd 0x4dd 0x3ffe 0x3ffe
pmap_steal_memory: seg 0: 0x500 0x500 0x3ffe 0x3ffe
pmap_steal_memory: seg 0: 0x502 0x502 0x3ffe 0x3ffe
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Sun Mar 11 07:38:43 JST 2012
        
root%arsenic.elements.tetera.org@localhost:/usr/nb/obj/sys/arch/cobalt/compile/GENERIC
Cobalt Qube 2
total memory = 65536 KB
avail memory = 59184 KB
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
cpu0: 48 TLB entries, 16MB max page size
cpu0: 32KB/32B 2-way set-associative L1 instruction cache
cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:eb:7e
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at 
pci0 dev 9 function 2 not configured
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:00:eb:78
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wd0 at atabus0 drive 0
wd0: <ST320423A>
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
boot device: tlp0
root on tlp0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.0.0.254
nfs_boot: my_domain=netbsd.org
nfs_boot: my_addr=10.0.0.160
nfs_boot: my_mask=255.0.0.0
nfs_boot: gateway=10.0.0.254
root on 10.0.0.254:/nfsroot
root file system type: nfs
warning: no /dev/console
pid 1(init): ABI set to O32 (e_flags=0x1007)
panic: init died (signal 0, exit 11)
kernel: breakpoint trap
Stopped in pid 1.1 (init) at    netbsd:cpu_Debugger+0x4:        jr      ra
                bdslot: nop
db> trace 
0xc323ddc8: cpu_Debugger+4 (63061,400,0,8043d4c0) ra 80297d4c sz 0
0xc323ddc8: vpanic+214 (63061,400,0,8043d4c0) ra 80297dd8 sz 56
0xc323de00: panic+24 (63061,0,b,7df3bc04) ra 80145b38 sz 32
0xc323de20: exit1+8cc (63061,0,b,7df3bc04) ra 80145b8c sz 128
0xc323dea0: sys_exit+44 (63061,c323df70,b,7df3bc04) ra 802b2104 sz 40
0xc323dec8: syscall+244 (63061,c323df70,b,7df3bc04) ra 801a1edc sz 128
0xc323df48: mips3_systemcall+dc (63061,c323df70,b,7df3bc04) ra 7df3bc04 sz 0
PC 0x7df3bc04: not in kernel space
0xc323df48: 0+7df3bc04 (63061,c323df70,b,7df3bc04) ra 0 sz 0
User-level: pid 1.1
db> 
        
>How-To-Repeat:
If someone want to get my restore cd iso image, I will upload it somewhere.
        
>Fix:
        
I have no idea.


>Unformatted: