NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: kern/45641 (ohci doesn't work on 5.99.56)



The following reply was made to PR kern/45641; it has been noted by GNATS.

From: Mariusz Wawrzyniak <rowerek%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: kern/45641 (ohci doesn't work on 5.99.56)
Date: Sun, 22 Jan 2012 19:59:35 +0100

 --001636c5c152d0264c04b72283df
 Content-Type: text/plain; charset=UTF-8
 
 Here is dmesg produced by 5.99.60 kernel (sources updated a couple of
 minutes ago)
 it wasn't OHCI but EHCI and UHCI interface, sorry for mistake
 
 dmesg shows that the problem still exists, but good to hear about
 some work over usb bugs
 
 
 
 NetBSD 5.99.60 (GENERIC) #0: Sun Jan 22 19:33:05 CET 2012
     laurent@netbsd:/usr/obj-current/sys/arch/amd64/compile/GENERIC
 total memory = 4094 MB
 avail memory = 3959 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 Gigabyte Technology Co., Ltd. P31-DS3L ( )
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel 686-class, 2833MHz, id 0x1067a
 cpu1 at mainbus0 apid 1: Intel 686-class, 2833MHz, id 0x1067a
 cpu2 at mainbus0 apid 3: Intel 686-class, 2833MHz, id 0x1067a
 cpu3 at mainbus0 apid 2: Intel 686-class, 2833MHz, id 0x1067a
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <GBT   ,GBTUACPI,42302e31>, AslId <GBTU,01010101>
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 SYSR (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 PMIO (PNP0C02) at acpi0 not configured
 EXPL (PNP0C02) at acpi0 not configured
 MEM (PNP0C01) at acpi0 not configured
 FWH (INT0800) at acpi0 not configured
 attimer1: attached to pcppi1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29c0 (rev. 0x02)
 agp0 at pchb0: can't find internal VGA device config space
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0421 (rev. 0xa1)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 16
 hdafg0 at hdaudio0: Realtek ALC888
 hdafg0: DAC00 8ch: Speaker [Jack]
 hdafg0: DAC01 2ch: HP Out [Jack]
 hdafg0: DIG02 2ch: SPDIF Out [Jack]
 hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
 hdafg0: ADC04 2ch: Mic In [Jack]
 hdafg0: DIG-In05 2ch: SPDIF In [Jack]
 hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg0: full duplex, playback, capture, independent
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x01)
 ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev.
 0x01)
 re0: interrupting at ioapic0 pin 19
 re0: Ethernet address 00:1d:7d:c3:9f:e5
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 1000baseT-FDX, auto
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
 uhci1: interrupting at ioapic0 pin 19
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
 uhci3: interrupting at ioapic0 pin 16
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev.
 0x01)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7)
 (rev. 0x01)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel interrupting at ioapic0 pin 15
 atabus1 at piixide0 channel 1
 piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid
 Controller (ICH7) (rev. 0x01)
 piixide1: bus-master DMA support present
 piixide1: primary channel configured to native-PCI mode
 piixide1: using ioapic0 pin 19 for native-PCI interrupt
 atabus2 at piixide1 channel 0
 piixide1: secondary channel configured to native-PCI mode
 atabus3 at piixide1 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 coretemp0 at cpu0: thermal sensor, 1 C resolution
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution
 acpicpu2 at cpu2: ACPI CPU
 coretemp2 at cpu2: thermal sensor, 1 C resolution
 acpicpu3 at cpu3: ACPI CPU
 coretemp3 at cpu3: thermal sensor, 1 C resolution
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 ehci0: handing over full speed device on port 8 to uhci3
 wd0 at atabus0 drive 0
 wd0: <ST3160815A>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 149 GB, 310098 cyl, 16 head, 63 sec, 512 bytes/sect x 312579695 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
 DMA)
 atapibus0 at atabus2: 2 targets
 cd0 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-S203P, , SB00> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd1 at atabus2 drive 0
 wd1: <ST380815AS>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 76318 MB, 155058 cyl, 16 head, 63 sec, 512 bytes/sect x 156299375
 sectors
 wd1: GPT GUID: 3ffa313b-78ec-11e0-90a7-001d7dc39fe5
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
 DMA)
 cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
 DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 uhub3: device problem, disabling port 2
 boot device: wd1
 root on wd1a dumps on wd1b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 wsdisplay0: screen 5 added (80x25, vt100 emulation)
 
 
 
 2012/1/22 David Holland <dholland-bugs%netbsd.org@localhost>
 
 > The following reply was made to PR kern/45641; it has been noted by GNATS.
 >
 > From: David Holland <dholland-bugs%netbsd.org@localhost>
 > To: gnats-bugs%netbsd.org@localhost
 > Cc:
 > Subject: Re: kern/45641 (ohci doesn't work on 5.99.56)
 > Date: Sun, 22 Jan 2012 15:46:31 +0000
 >
 >  On Sun, Jan 22, 2012 at 03:45:22PM +0000, dholland%NetBSD.org@localhost 
 > wrote:
 >  > Responsible-Changed-Why:
 >  > usb bugs are port-independent until proven otherwise.
 >
 >  btw, I believe a couple of usb problems along these lines were fixed
 >  last month, so you might want to try a newer -current.
 >
 >  --
 >  David A. Holland
 >  dholland%netbsd.org@localhost
 >
 >
 
 --001636c5c152d0264c04b72283df
 Content-Type: text/html; charset=UTF-8
 Content-Transfer-Encoding: quoted-printable
 
 Here is dmesg produced by 5.99.60 kernel (sources updated a couple of minut=
 es ago)<br>it wasn&#39;t OHCI but EHCI and UHCI interface, sorry for mistak=
 e<br><br>dmesg shows that the problem still exists, but good to hear about<=
 br>
 some work over usb bugs<br><br>
 <br><br>NetBSD 5.99.60 (GENERIC) #0: Sun Jan 22 19:33:05 CET 2012<br>=C2=A0=
 =C2=A0=C2=A0 laurent@netbsd:/usr/obj-current/sys/arch/amd64/compile/GENERIC=
 <br>total memory =3D 4094 MB<br>avail memory =3D 3959 MB<br>timecounter: Ti=
 mecounters tick every 10.000 msec<br>
 timecounter: Timecounter &quot;i8254&quot; frequency 1193182 Hz quality 100=
 <br>Gigabyte Technology Co., Ltd. P31-DS3L ( )<br>mainbus0 (root)<br>cpu0 a=
 t mainbus0 apid 0: Intel 686-class, 2833MHz, id 0x1067a<br>cpu1 at mainbus0=
  apid 1: Intel 686-class, 2833MHz, id 0x1067a<br>
 cpu2 at mainbus0 apid 3: Intel 686-class, 2833MHz, id 0x1067a<br>cpu3 at ma=
 inbus0 apid 2: Intel 686-class, 2833MHz, id 0x1067a<br>ioapic0 at mainbus0 =
 apid 2: pa 0xfec00000, version 20, 24 pins<br>acpi0 at mainbus0: Intel ACPI=
 CA 20110623<br>
 acpi0: X/RSDT: OemId &lt;GBT=C2=A0=C2=A0 ,GBTUACPI,42302e31&gt;, AslId &lt;=
 GBTU,01010101&gt;<br>acpi0: SCI interrupting at int 9<br>timecounter: Timec=
 ounter &quot;ACPI-Fast&quot; frequency 3579545 Hz quality 1000<br>hpet0 at =
 acpi0: high precision event timer (mem 0xfed00000-0xfed00400)<br>
 timecounter: Timecounter &quot;hpet0&quot; frequency 14318180 Hz quality 20=
 00<br>acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button<br>SYSR (PNP0C02=
 ) at acpi0 not configured<br>attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43=
 <br>
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61<br>midi0 at pcppi1: PC speaker<br>=
 sysbeep0 at pcppi1<br>pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12<br=
 >pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1<br>PMIO (PN=
 P0C02) at acpi0 not configured<br>
 EXPL (PNP0C02) at acpi0 not configured<br>MEM (PNP0C01) at acpi0 not config=
 ured<br>FWH (INT0800) at acpi0 not configured<br>attimer1: attached to pcpp=
 i1<br>pckbd0 at pckbc2 (kbd slot)<br>pckbc2: using irq 1 for kbd slot<br>
 wskbd0 at pckbd0: console keyboard<br>pms0 at pckbc2 (aux slot)<br>pckbc2: =
 using irq 12 for aux slot<br>wsmouse0 at pms0 mux 0<br>pci0 at mainbus0 bus=
  0: configuration mode 1<br>pci0: i/o space, memory space enabled, rd/line,=
  rd/mult, wr/inv ok<br>
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29c0 (rev. 0x02)<br=
 >agp0 at pchb0: can&#39;t find internal VGA device config space<br>ppb0 at =
 pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)<br>ppb0: PC=
 I Express 1.0 &lt;Root Port of PCI-E Root Complex&gt;<br>
 pci1 at ppb0 bus 1<br>pci1: i/o space, memory space enabled, rd/line, wr/in=
 v ok<br>vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0421 (rev. 0=
 xa1)<br>wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), usin=
 g wskbd0<br>
 wsmux1: connecting to wsdisplay0<br>drm at vga0 not configured<br>hdaudio0 =
 at pci0 dev 27 function 0: HD Audio Controller<br>hdaudio0: interrupting at=
  ioapic0 pin 16<br>hdafg0 at hdaudio0: Realtek ALC888<br>hdafg0: DAC00 8ch:=
  Speaker [Jack]<br>
 hdafg0: DAC01 2ch: HP Out [Jack]<br>hdafg0: DIG02 2ch: SPDIF Out [Jack]<br>=
 hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]<br>hdafg0: ADC04 2ch: Mic =
 In [Jack]<br>hdafg0: DIG-In05 2ch: SPDIF In [Jack]<br>hdafg0: 8ch/2ch 44100=
 Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3<br>
 audio0 at hdafg0: full duplex, playback, capture, independent<br>ppb1 at pc=
 i0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)<br>ppb1: PCI=
  Express 1.0 &lt;Root Port of PCI-E Root Complex&gt;<br>pci2 at ppb1 bus 2<=
 br>
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok<br>ppb2 at pci0 d=
 ev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x01)<br>ppb2: PCI Exp=
 ress 1.0 &lt;Root Port of PCI-E Root Complex&gt;<br>pci3 at ppb2 bus 3<br>
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok<br>re0 at pci3 de=
 v 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x01)<br>re0:=
  interrupting at ioapic0 pin 19<br>re0: Ethernet address 00:1d:7d:c3:9f:e5<=
 br>
 re0: using 256 tx descriptors<br>rgephy0 at re0 phy 7: RTL8169S/8110S/8211 =
 1000BASE-T media interface, rev. 2<br>rgephy0: 10baseT, 10baseT-FDX, 100bas=
 eTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto<br>uhci0 at pci0 dev 29 =
 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)<br>
 uhci0: interrupting at ioapic0 pin 23<br>usb0 at uhci0: USB revision 1.0<br=
 >uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)<=
 br>uhci1: interrupting at ioapic0 pin 19<br>usb1 at uhci1: USB revision 1.0=
 <br>
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)<b=
 r>uhci2: interrupting at ioapic0 pin 18<br>usb2 at uhci2: USB revision 1.0<=
 br>uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01=
 )<br>
 uhci3: interrupting at ioapic0 pin 16<br>usb3 at uhci3: USB revision 1.0<br=
 >ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)<=
 br>ehci0: interrupting at ioapic0 pin 23<br>ehci0: EHCI version 1.0<br>
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3<br>usb4=
  at ehci0: USB revision 2.0<br>ppb3 at pci0 dev 30 function 0: vendor 0x808=
 6 product 0x244e (rev. 0xe1)<br>pci4 at ppb3 bus 4<br>pci4: i/o space, memo=
 ry space enabled<br>
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x0=
 1)<br>timecounter: Timecounter &quot;ichlpcib0&quot; frequency 3579545 Hz q=
 uality 1000<br>ichlpcib0: 24-bit timer<br>ichlpcib0: TCO (watchdog) timer c=
 onfigured.<br>
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) =
 (rev. 0x01)<br>piixide0: bus-master DMA support present<br>piixide0: primar=
 y channel configured to compatibility mode<br>piixide0: primary channel int=
 errupting at ioapic0 pin 14<br>
 atabus0 at piixide0 channel 0<br>piixide0: secondary channel configured to =
 compatibility mode<br>piixide0: secondary channel interrupting at ioapic0 p=
 in 15<br>atabus1 at piixide0 channel 1<br>piixide1 at pci0 dev 31 function =
 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)<br>
 piixide1: bus-master DMA support present<br>piixide1: primary channel confi=
 gured to native-PCI mode<br>piixide1: using ioapic0 pin 19 for native-PCI i=
 nterrupt<br>atabus2 at piixide1 channel 0<br>piixide1: secondary channel co=
 nfigured to native-PCI mode<br>
 atabus3 at piixide1 channel 1<br>ichsmb0 at pci0 dev 31 function 3: vendor =
 0x8086 product 0x27da (rev. 0x01)<br>ichsmb0: interrupting at ioapic0 pin 1=
 9<br>iic0 at ichsmb0: I2C bus<br>isa0 at ichlpcib0<br>acpicpu0 at cpu0: ACP=
 I CPU<br>
 acpicpu0: C1: HLT, lat=C2=A0=C2=A0 0 us, pow=C2=A0=C2=A0=C2=A0=C2=A0 0 mW<b=
 r>acpicpu0: T0: I/O, lat=C2=A0=C2=A0 1 us, pow=C2=A0=C2=A0=C2=A0=C2=A0 0 mW=
 , 100 %<br>acpicpu0: T1: I/O, lat=C2=A0=C2=A0 1 us, pow=C2=A0=C2=A0=C2=A0=
 =C2=A0 0 mW,=C2=A0 88 %<br>acpicpu0: T2: I/O, lat=C2=A0=C2=A0 1 us, pow=C2=
 =A0=C2=A0=C2=A0=C2=A0 0 mW,=C2=A0 76 %<br>acpicpu0: T3: I/O, lat=C2=A0=C2=
 =A0 1 us, pow=C2=A0=C2=A0=C2=A0=C2=A0 0 mW,=C2=A0 64 %<br>
 acpicpu0: T4: I/O, lat=C2=A0=C2=A0 1 us, pow=C2=A0=C2=A0=C2=A0=C2=A0 0 mW,=
 =C2=A0 52 %<br>acpicpu0: T5: I/O, lat=C2=A0=C2=A0 1 us, pow=C2=A0=C2=A0=C2=
 =A0=C2=A0 0 mW,=C2=A0 40 %<br>acpicpu0: T6: I/O, lat=C2=A0=C2=A0 1 us, pow=
 =C2=A0=C2=A0=C2=A0=C2=A0 0 mW,=C2=A0 28 %<br>acpicpu0: T7: I/O, lat=C2=A0=
 =C2=A0 1 us, pow=C2=A0=C2=A0=C2=A0=C2=A0 0 mW,=C2=A0 16 %<br>coretemp0 at c=
 pu0: thermal sensor, 1 C resolution<br>
 acpicpu1 at cpu1: ACPI CPU<br>coretemp1 at cpu1: thermal sensor, 1 C resolu=
 tion<br>acpicpu2 at cpu2: ACPI CPU<br>coretemp2 at cpu2: thermal sensor, 1 =
 C resolution<br>acpicpu3 at cpu3: ACPI CPU<br>coretemp3 at cpu3: thermal se=
 nsor, 1 C resolution<br>
 timecounter: Timecounter &quot;clockinterrupt&quot; frequency 100 Hz qualit=
 y 0<br>uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00=
 , addr 1<br>uhub0: 2 ports with 2 removable, self powered<br>uhub1 at usb1:=
  vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1<br>
 uhub1: 2 ports with 2 removable, self powered<br>uhub2 at usb2: vendor 0x80=
 86 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1<br>uhub2: 2 ports with 2=
  removable, self powered<br>uhub3 at usb3: vendor 0x8086 UHCI root hub, cla=
 ss 9/0, rev 1.00/1.00, addr 1<br>
 uhub3: 2 ports with 2 removable, self powered<br>uhub4 at usb4: vendor 0x80=
 86 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1<br>uhub4: 8 ports with 8=
  removable, self powered<br>ehci0: handing over full speed device on port 8=
  to uhci3<br>
 wd0 at atabus0 drive 0<br>wd0: &lt;ST3160815A&gt;<br>wd0: drive supports 16=
 -sector PIO transfers, LBA48 addressing<br>wd0: 149 GB, 310098 cyl, 16 head=
 , 63 sec, 512 bytes/sect x 312579695 sectors<br>wd0: 32-bit data port<br>
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)<br=
 >wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
 MA)<br>atapibus0 at atabus2: 2 targets<br>cd0 at atapibus0 drive 1: &lt;TSS=
 Tcorp CDDVDW SH-S203P, , SB00&gt; cdrom removable<br>
 cd0: 32-bit data port<br>cd0: drive supports PIO mode 4, DMA mode 2, Ultra-=
 DMA mode 5 (Ultra/100)<br>wd1 at atabus2 drive 0<br>wd1: &lt;ST380815AS&gt;=
 <br>wd1: drive supports 16-sector PIO transfers, LBA48 addressing<br>wd1: 7=
 6318 MB, 155058 cyl, 16 head, 63 sec, 512 bytes/sect x 156299375 sectors<br=
 >
 wd1: GPT GUID: 3ffa313b-78ec-11e0-90a7-001d7dc39fe5<br>wd1: 32-bit data por=
 t<br>wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/13=
 3)<br>wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (us=
 ing DMA)<br>
 cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DM=
 A)<br>Kernelized RAIDframe activated<br>pad0: outputs: 44100Hz, 16-bit, ste=
 reo<br>audio1 at pad0: half duplex, playback, capture<br>uhub3: device prob=
 lem, disabling port 2<br>
 boot device: wd1<br>root on wd1a dumps on wd1b<br>root file system type: ff=
 s<br>wsdisplay0: screen 1 added (80x25, vt100 emulation)<br>wsdisplay0: scr=
 een 2 added (80x25, vt100 emulation)<br>wsdisplay0: screen 3 added (80x25, =
 vt100 emulation)<br>
 wsdisplay0: screen 4 added (80x25, vt100 emulation)<br>wsdisplay0: screen 5=
  added (80x25, vt100 emulation)<br><br><br><br><div class=3D"gmail_quote">2=
 012/1/22 David Holland <span dir=3D"ltr">&lt;<a href=3D"mailto:dholland-bug=
 s%netbsd.org@localhost">dholland-bugs%netbsd.org@localhost</a>&gt;</span><br>
 <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
 x #ccc solid;padding-left:1ex">The following reply was made to PR kern/4564=
 1; it has been noted by GNATS.<br>
 <br>
 From: David Holland &lt;<a 
href=3D"mailto:dholland-bugs%netbsd.org@localhost";>dhollan=
 d-bugs%netbsd.org@localhost</a>&gt;<br>
 To: <a 
href=3D"mailto:gnats-bugs%netbsd.org@localhost";>gnats-bugs%netbsd.org@localhost</a><br>
 Cc:<br>
 Subject: Re: kern/45641 (ohci doesn&#39;t work on 5.99.56)<br>
 Date: Sun, 22 Jan 2012 15:46:31 +0000<br>
 <div class=3D"im"><br>
 =C2=A0On Sun, Jan 22, 2012 at 03:45:22PM +0000, dholland%NetBSD.org@localhost 
wrote:<=
 br>
  =C2=A0&gt; Responsible-Changed-Why:<br>
  =C2=A0&gt; usb bugs are port-independent until proven otherwise.<br>
 <br>
 </div>=C2=A0btw, I believe a couple of usb problems along these lines were =
 fixed<br>
 =C2=A0last month, so you might want to try a newer -current.<br>
 <br>
 =C2=A0--<br>
 =C2=A0David A. Holland<br>
 =C2=A0<a 
href=3D"mailto:dholland%netbsd.org@localhost";>dholland%netbsd.org@localhost</a><br>
 <br>
 </blockquote></div><br>
 
 --001636c5c152d0264c04b72283df--
 


Home | Main Index | Thread Index | Old Index