kern/45477: volume control doesn't work on 5.99.55/GENERIC

[cheusov%tut.by@localhost]

>Number:         45477
>Category:       kern
>Synopsis:       cannot change audion volume on 5.99.55 (GENERIC)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Oct 16 12:20:00 +0000 2011
>Originator:     Aleksey Cheusov
>Release:        NetBSD 5.99.55
>Organization:
>Environment:
System: NetBSD asrock.chizhovka.net 5.99.55 NetBSD 5.99.55 (GENERIC) #0: Tue 
Sep 20 00:06:43 EEST 2011 
cheusov%asrock.chizhovka.net@localhost:/srv/obj-current/sys/arch/amd64/compile/GENERIC
 amd64
Architecture: x86_64
Machine: amd64
>Description:
On my system running 5.99.55 with GENERIC kernel I cannot change
audio volume using such programs as aumix and xmms. Volume doesn't change at 
all.
At the same time

   mixerctl -w inputs.dac=<volume>

works fine.

   $ mixerctl -a
   inputs.dac=252,252
   inputs.reclvl=88,88
   inputs.reclvl.mute=off
   outputs.master=152,152
   outputs.master.mute=off
   outputs.master2=0,0
   outputs.master2.mute=off
   outputs.dacsel=DAC00,DIG02
   record.source=ADC01
   $

dmesg is below.

NetBSD 5.99.55 (GENERIC) #0: Tue Sep 20 00:06:43 EEST 2011
        
cheusov%asrock.chizhovka.net@localhost:/srv/obj-current/sys/arch/amd64/compile/GENERIC
total memory = 1983 MB
avail memory = 1908 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz, id 0x106c2
cpu1 at mainbus0 apid 2: Intel(R) Atom(TM) CPU  330   @ 1.60GHz, id 0x106c2
cpu2 at mainbus0 apid 1: Intel(R) Atom(TM) CPU  330   @ 1.60GHz, id 0x106c2
cpu3 at mainbus0 apid 3: Intel(R) Atom(TM) CPU  330   @ 1.60GHz, id 0x106c2
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <071709,RSDT1230,20090717>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x10de product 0x0a82 (rev. 0xb1)
vendor 0x10de product 0x0a88 (RAM memory, revision 0xb1) at pci0 dev 0 function 
1 not configured
pcib0 at pci0 dev 3 function 0: vendor 0x10de product 0x0aad (rev. 0xb2)
vendor 0x10de product 0x0aa4 (RAM memory, revision 0xb1) at pci0 dev 3 function 
1 not configured
nfsmbc0 at pci0 dev 3 function 2: vendor 0x10de product 0x0aa2 (rev. 0xb1)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
vendor 0x10de product 0x0a89 (RAM memory, revision 0xb1) at pci0 dev 3 function 
3 not configured
vendor 0x10de product 0x0aa3 (Co-processor processor, revision 0xb1) at pci0 
dev 3 function 5 not configured
ohci0 at pci0 dev 4 function 0: vendor 0x10de product 0x0aa5 (rev. 0xb1)
LUB0: Picked IRQ 16 with weight 0
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 4 function 1: vendor 0x10de product 0x0aa6 (rev. 0xb1)
LUB2: Picked IRQ 18 with weight 0
ehci0: interrupting at ioapic0 pin 18
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 12 ports each: ohci0
usb1 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 8 function 0: HD Audio Controller
LAZA: Picked IRQ 20 with weight 0
hdaudio0: interrupting at ioapic0 pin 20
hdafg0 at hdaudio0: VIA VT1708S
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: ADC01 2ch: Line In [Jack], Mic In [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 48000Hz PCM16*
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: NVIDIA MCP79/7A HDMI
hdafg1: DIG00 2ch: Digital Out [Jack]
hdafg1: 2ch/0ch 48000Hz PCM16*
audio1 at hdafg1: full duplex, playback, capture, independent
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x0aab (rev. 0xb1)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
nfe0 at pci0 dev 10 function 0: vendor 0x10de product 0x0ab0 (rev. 0xb1)
LMAC: Picked IRQ 21 with weight 0
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 90:e6:ba:25:46:eb
rgephy0 at nfe0 phy 3: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ahcisata0 at pci0 dev 11 function 0: vendor 0x10de product 0x0ab9
LSA0: Picked IRQ 22 with weight 0
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 
0xe222ff25<SXS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SAL,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ppb1 at pci0 dev 16 function 0: vendor 0x10de product 0x0aa0 (rev. 0xb1)
pci2 at ppb1 bus 1
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x10de product 0x087d (rev. 0xb1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: T0: HLT, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: HLT, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: HLT, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: HLT, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: HLT, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: HLT, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: HLT, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: HLT, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ehci0: handing over low speed device on port 1 to ohci0
wd0 at atabus0 drive 0
wd0: <ST9320325AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <Slimtype DVD A  DS8A3S, 906200301141, HP51> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: D-Link KVM-221, rev 1.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: D-Link KVM-221, rev 1.00/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0

>How-To-Repeat:
See above
>Fix:
No idea