NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: kern/36838 (pci bus is disabled on ACPI kernel on Fujitsu FMV LOOX P70WN.)



The following reply was made to PR kern/36838; it has been noted by GNATS.

From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
To: gnats-bugs%NetBSD.org@localhost, joerg%NetBSD.org@localhost
Cc: netbsd-bugs%netbsd.org@localhost, gnats-admin%netbsd.org@localhost
Subject: Re: kern/36838 (pci bus is disabled on ACPI kernel on Fujitsu FMV
 LOOX P70WN.)
Date: Thu, 12 Nov 2009 05:55:08 +0900 (JST)

 ----Next_Part(Thu_Nov_12_05_55_08_2009_057)--
 Content-Type: Text/Plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit
 
 I try your netbsd-current-i386.bz2 kernel with ACPI patch,
 pci2 is still disabled.
 Nothing changed.
 
 I attach dmesg of netbsd-current-i386.bz2 (netbsd-current-i386-dmesg.txt).
 
 
 ----Next_Part(Thu_Nov_12_05_55_08_2009_057)--
 Content-Type: Text/Plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline; filename="netbsd-current-i386-dmesg.txt"
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.99.22 (GENERIC) #0: Tue Nov 10 00:08:30 CET 2009
        
joerg%britannica.bec.de@localhost:/home/joerg/data/NetBSD/clean2/src/sys/arch/i386/compile/GENERIC
 total memory = 1013 MB
 avail memory = 985 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 FUJITSU FMVLP70WN ( )
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel 686-class, 1197MHz, id 0x6ec
 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20090730
 acpi0: X/RSDT: OemId <FUJ   ,PC      ,01130000>, AslId <FUJ ,00000100>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 DIGI (FUJ02E6) at acpi0 not configured
 BTNS (FUJ02BF) at acpi0 not configured
 FJEX (FUJ02B1) at acpi0 not configured
 acpiec0 at acpi0 (EC, PNP0C09): io 0x62,0x66
 attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
 npx1: reported by CPUID; using exception 16
 pckbc1 at acpi0 (KBC, PNP0320) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
 FEXT (FUJ02E3) at acpi0 not configured
 acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
 acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery (Control Method)
 ACPI Warning for \_SB_.CMB1._BIF: Converted Buffer to expected String at index 
9 (20090730/nsrepair-215)
 acpibat0: battery info: Fujitsu, LION, CP240502 1
 acpitz0 at acpi0 (TZ00): critical 100.0C passive 26.8C, passive cooling
 acpitz1 at acpi0 (TZ01): critical 100.0C passive 26.8C, passive cooling
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x27a0 (rev. 0x03)
 agp0 at pchb0: detected 7932k stolen memory
 agp0: aperture at 0xe0000000, size 0x10000000
 vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga1 not configured
 vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 
dev 2 function 1 not configured
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 17
 hdafg0 at hdaudio0 vendor 0x8384 product 0x7616 nid 0x01 (firmware 
configuration)
 hdafg0: ADC0:07, Analog Mic In: Fixed Function (Unknown, 13)
 hdafg0: ADC1:08, Analog Mic In: Jack (Black, 0C)
 hdafg0: DAC2:02, Analog HP Out: Jack (Black, 0A)
 hdafg0: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
 audio0 at hdafg0: full duplex, playback, capture, independent
 hdvsmfg at hdaudio0 vendor 0x11C1 product 0x1040 nid 0x01 not configured
 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
 ppb0: disabling notification events
 pci1 at ppb0 bus 2
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 mskc0 at pci1 dev 0 function 0mskc0: interrupt moderation is 0 us
 , Yukon-2 EC Ultra rev. A1 (0x2): ioapic0 pin 16
 msk0 at mskc0 port A: Ethernet address 00:17:42:3d:72:02
 ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
 ppb1: disabling notification events
 pci2 at ppb1 bus 5
 pci2: no spaces enabled!
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 20
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 16
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
 pci3 at ppb2 bus 8
 pci3: i/o space, memory space enabled
 cbb0 at pci3 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0x8d)
 sdhc0 at pci3 dev 3 function 1: vendor 0x1180 product 0x0822 (rev. 0x13)
 sdhc0: interrupting at ioapic0 pin 17
 sdmmc0 at sdhc0
 cbb0: cacheline 0x0 lattimer 0x40
 cbb0: bhlc 0x824000
 cbb0: interrupting at ioapic0 pin 16
 cardslot0 at cbb0
 cardbus0 at cardslot0: bus 9
 pcmcia0 at cardslot0
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 gpiobus at ichlpcib0 not configured
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) 
(rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel ignored (disabled)
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 1197130950 Hz quality 3000
 acpiacad0: AC adapter online.
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 ugen0 at uhub2 port 1
 ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
 wd0 at atabus0 drive 0: <TOSHIBA MK6006GAH>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 ubt0 at uhub2 port 2
 ubt0: vendor 0x0c24 product 0x000f, rev 2.00/19.15, addr 3
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 ----Next_Part(Thu_Nov_12_05_55_08_2009_057)----
 
 


Home | Main Index | Thread Index | Old Index