NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: port-alpha/40604: AlphaServer DS20E loses HDs and other Drives when adding 1 GB more RAM
The following reply was made to PR port-alpha/40604; it has been noted by GNATS.
From: Marco Poli <polimarco%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc:
Subject: Re: port-alpha/40604: AlphaServer DS20E loses HDs and other Drives
when adding 1 GB more RAM
Date: Thu, 12 Feb 2009 21:02:42 -0200
--00163628395ebd8adb0462c0b7dd
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Hello Manuel,
as far as I can tell (I have no serial terminal and the install CD does't
have dmesg), the only ones are:
---
ahc0 at pci0 dev 6 function 0: Adaptec aic7895 Ultra SCSI adapter
ahc0: interrupting at dec 6600 irq 19
ahc0: aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 6 function 1: Adaptec aic7895 Ultra SCSI adapter
ahc1: interrupting at dec 6600 irq 18
ahc1: aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
scsibus 0: waiting 2 seconds for devices to settle...
scsibus 1: waiting 2 seconds for devices to settle...
scsibus 2: waiting 2 seconds for devices to settle...
---
The working (1 GB boot) dmesg is:
---
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0.1 (GENERIC.MP) #0: Tue Oct 7 20:56:07 PDT 2008
builds@wb27
:/home/builds/ab/netbsd-4-0-1-RELEASE/alpha/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/alpha/compile/
GENERIC.MP
COMPAQ AlphaServer DS20E 833 MHz, s/n ...
8192 byte page size, 2 processors.
total memory = 1024 MB
(2752 KB reserved for PROM, 1021 MB used by NetBSD)
avail memory = 996 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264B-4
cpu0: Architecture extensions: 1307<PAT,MVI,CIX,FIX,BWX>
cpu1 at mainbus0: ID 1, 21264B-4
cpu1: Architecture extensions: 1307<PAT,MVI,CIX,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 8 Dchips, 2 memory buses of 32 bytes
tsc0: arrays present: 1024MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
sio0 at pci0 dev 5 function 0: Contaq Microsystems 82C693 PCI-ISA Bridge
(rev. 0x00)
cypide0 at pci0 dev 5 function 1
cypide0: Cypress 82C693 IDE Controller (rev. 0x00)
cypide0: bus-master DMA support present
cypide0: primary channel wired to compatibility mode
cypide0: primary channel interrupting at isa irq 14
atabus0 at cypide0 channel 0
cypide1 at pci0 dev 5 function 2
cypide1: Cypress 82C693 IDE Controller (rev. 0x00)
cypide1: hardware does not support DMA
cypide1: primary channel wired to compatibility mode
cypide1: secondary channel interrupting at isa irq 15
atabus1 at cypide1 channel 0
ohci0 at pci0 dev 5 function 3: Contaq Microsystems 82C693 PCI-ISA Bridge
(rev. 0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Contaq Microsys OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0 at pci0 dev 6 function 0: Adaptec aic7895 Ultra SCSI adapter
ahc0: interrupting at dec 6600 irq 19
ahc0: aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 6 function 1: Adaptec aic7895 Ultra SCSI adapter
ahc1: interrupting at dec 6600 irq 18
ahc1: aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
vga0 at pci0 dev 7 function 0: 3D Labs GLINT Permedia 3 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
pcppi0: attached to attimer0
tsp1 at tsc0
pci1 at tsp1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
esiop0 at pci1 dev 7 function 0: Symbios Logic 53c895 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at dec 6600 irq 47
scsibus2 at esiop0: 16 targets, 8 luns per target
fxp0 at pci1 dev 9 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at dec 6600 irq 39
fxp0: Ethernet address 00:50:8b:ae:dc:8a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
stray isa irq 14
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 9.5B> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(cypide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus2 target 0 lun 0: <COMPAQ, BD0366459B, B010> disk fixed
sd0: 34732 MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sect x 71132000
sectors
sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
sd1 at scsibus2 target 1 lun 0: <COMPAQ, BD0366459B, B010> disk fixed
sd1: 34732 MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sect x 71132000
sectors
sd1: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
sd2 at scsibus2 target 2 lun 0: <COMPAQ, BD0366459B, B010> disk fixed
sd2: 34732 MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sect x 71132000
sectors
sd2: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
sd3 at scsibus2 target 3 lun 0: <COMPAQ, BD0366459B, B010> disk fixed
sd3: 34732 MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sect x 71132000
sectors
sd3: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
sd4 at scsibus2 target 4 lun 0: <COMPAQ, BD0366459B, B010> disk fixed
sd4: 34732 MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sect x 71132000
sectors
sd4: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd2a
raid0: Total Sectors: 4460160 (2177 MB)
raid1: RAID Level 1
raid1: Components: /dev/sd1a /dev/sd3a
raid1: Total Sectors: 4460160 (2177 MB)
raid2: RAID Level 5
raid2: Components: /dev/sd0d /dev/sd2d /dev/sd3d /dev/sd4d
raid2: Total Sectors: 200015040 (97663 MB)
root on raid0a dumps on raid0b
root file system type: ffs
WARNING: clock gained 2 days -- CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
----
One more thing that might be of interest: the /dev/md0a from the bootcd
works and gives me a working environment, but when I try to mount /dev/cd0a
/mnt, I get
stray isa irq 14
the cd spins and everything hangs.
On Thu, Feb 12, 2009 at 1:25 PM, Manuel Bouyer
<bouyer%antioche.eu.org@localhost>wrote:
> The following reply was made to PR port-alpha/40604; it has been noted by
> GNATS.
>
> From: Manuel Bouyer <bouyer%antioche.eu.org@localhost>
> To: gnats-bugs%NetBSD.org@localhost
> Cc: port-alpha-maintainer%NetBSD.org@localhost,
> gnats-admin%NetBSD.org@localhost,
> netbsd-bugs%NetBSD.org@localhost
> Subject: Re: port-alpha/40604: AlphaServer DS20E loses HDs and other Drives
> when adding 1 GB more RAM
> Date: Thu, 12 Feb 2009 16:21:15 +0100
>
> On Tue, Feb 10, 2009 at 10:55:00PM +0000, polimarco%gmail.com@localhost
> wrote:
> > [...]
> > What wasn't my surprise in the next boot, when I was faced with a
> mysterious
> >
> > -----
> > probe(esiop0:0:0:0): request sense for a request sense ?
> > probe(esiop0:0:0:0): request sense failed with error 22
> > probe(esiop0:0:0:0): generic HBA error
> > -----
>
> Do you have messages from the scsi layer or controller before this one ?
>
> --
> Manuel Bouyer, LIP6, Universite Paris VI.
> Manuel.Bouyer%lip6.fr@localhost
> NetBSD: 26 ans d'experience feront toujours la difference
> --
>
>
--00163628395ebd8adb0462c0b7dd
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
<br>Hello Manuel,<br><br><br> as far as I can tell (I have no serial t=
erminal and the install CD does't have dmesg), the only ones are:<br><b=
r>---<br>
<meta http-equiv=3D"CONTENT-TYPE" content=3D"text/html;
charset=3Dutf-8">
<title></title>
<meta name=3D"GENERATOR" content=3D"OpenOffice.org 2.4 (Unix)">
<style type=3D"text/css">
<!--
@page { size: 8.5in 11in; margin: 0.79in }
P { margin-bottom: 0.08in }
-->
</style>
<p style=3D"margin-bottom: 0in;">ahc0 at pci0 dev 6 function 0: Adaptec
aic7895 Ultra SCSI adapter</p>
<p style=3D"margin-bottom: 0in;">ahc0: interrupting at dec 6600 irq 19</p>
<p style=3D"margin-bottom: 0in;">ahc0: aic7895C: Ultra Wide Channel A,
SCSI Id=3D7, 32/253 SCBs</p>
<p style=3D"margin-bottom: 0in;">scsibus0 at ahc0: 16 targets, 8 luns
per target</p>
<p style=3D"margin-bottom: 0in;">ahc1 at pci0 dev 6 function 1: Adaptec
aic7895 Ultra SCSI adapter</p>
<p style=3D"margin-bottom: 0in;">ahc1: interrupting at dec 6600 irq 18</p>
<p style=3D"margin-bottom: 0in;">ahc1: aic7895C: Ultra Wide Channel B,
SCSI Id=3D7, 32/253 SCBs</p>
<p style=3D"margin-bottom: 0in;">scsibus1 at ahc1: 16 targets, 8 luns
per target</p>
<br><br>scsibus 0: waiting 2 seconds for devices to settle...<br>scsibus 1:=
waiting 2 seconds for devices to settle...<br>scsibus 2: waiting 2 seconds=
for devices to settle...<br>---<br><br><br>The working (1 GB boot) dmesg i=
s:<br>
<br>---<br>
<meta http-equiv=3D"CONTENT-TYPE" content=3D"text/html;
charset=3Dutf-8">
<title></title>
<meta name=3D"GENERATOR" content=3D"OpenOffice.org 2.4 (Unix)">
<style type=3D"text/css">
<!--
@page { size: 8.5in 11in; margin: 0.79in }
P { margin-bottom: 0.08in }
-->
</style>
<p style=3D"margin-bottom: 0in;">Copyright (c) 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005,</p>
<p style=3D"margin-bottom: 0in;"> 2006, 2007</p>
<p style=3D"margin-bottom: 0in;"> The NetBSD Foundation, Inc. All
rights reserved.</p>
<p style=3D"margin-bottom: 0in;">Copyright (c) 1982, 1986, 1989, 1991,
1993</p>
<p style=3D"margin-bottom: 0in;"> The Regents of the University of
California. All rights reserved.</p>
<p style=3D"margin-bottom: 0in;"><br>
</p>
<p style=3D"margin-bottom: 0in;">NetBSD 4.0.1 (<a href=3D"http://GENERIC.MP=
">GENERIC.MP</a>) #0: Tue Oct=20
7 20:56:07 PDT 2008</p>
<p style=3D"margin-bottom: 0in;"> =20
builds@wb27:/home/builds/ab/netbsd-4-0-1-RELEASE/alpha/200810080053Z-obj/ho=
me/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/alpha/compile/<a href=3D"htt=
p://GENERIC.MP">GENERIC.MP</a></p>
<p style=3D"margin-bottom: 0in;">COMPAQ AlphaServer DS20E 833 MHz, s/n ...<=
/p>
<p style=3D"margin-bottom: 0in;">8192 byte page size, 2 processors.</p>
<p style=3D"margin-bottom: 0in;">total memory =3D 1024 MB</p>
<p style=3D"margin-bottom: 0in;">(2752 KB reserved for PROM, 1021 MB
used by NetBSD)</p>
<p style=3D"margin-bottom: 0in;">avail memory =3D 996 MB</p>
<p style=3D"margin-bottom: 0in;">mainbus0 (root)</p>
<p style=3D"margin-bottom: 0in;">cpu0 at mainbus0: ID 0 (primary),
21264B-4</p>
<p style=3D"margin-bottom: 0in;">cpu0: Architecture extensions:
1307<PAT,MVI,CIX,FIX,BWX></p>
<p style=3D"margin-bottom: 0in;">cpu1 at mainbus0: ID 1, 21264B-4</p>
<p style=3D"margin-bottom: 0in;">cpu1: Architecture extensions:
1307<PAT,MVI,CIX,FIX,BWX></p>
<p style=3D"margin-bottom: 0in;">tsc0 at mainbus0: 21272 Core Logic
Chipset, Cchip rev 0</p>
<p style=3D"margin-bottom: 0in;">tsc0: 8 Dchips, 2 memory buses of 32
bytes</p>
<p style=3D"margin-bottom: 0in;">tsc0: arrays present: 1024MB, 0MB, 0MB,
0MB, Dchip 0 rev 1</p>
<p style=3D"margin-bottom: 0in;">tsp0 at tsc0</p>
<p style=3D"margin-bottom: 0in;">pci0 at tsp0 bus 0</p>
<p style=3D"margin-bottom: 0in;">pci0: i/o space, memory space enabled,
rd/line, rd/mult, wr/inv ok</p>
<p style=3D"margin-bottom: 0in;">sio0 at pci0 dev 5 function 0: Contaq
Microsystems 82C693 PCI-ISA Bridge (rev. 0x00)</p>
<p style=3D"margin-bottom: 0in;">cypide0 at pci0 dev 5 function 1</p>
<p style=3D"margin-bottom: 0in;">cypide0: Cypress 82C693 IDE Controller
(rev. 0x00)</p>
<p style=3D"margin-bottom: 0in;">cypide0: bus-master DMA support present</p=
>
<p style=3D"margin-bottom: 0in;">cypide0: primary channel wired to
compatibility mode</p>
<p style=3D"margin-bottom: 0in;">cypide0: primary channel interrupting
at isa irq 14</p>
<p style=3D"margin-bottom: 0in;">atabus0 at cypide0 channel 0</p>
<p style=3D"margin-bottom: 0in;">cypide1 at pci0 dev 5 function 2</p>
<p style=3D"margin-bottom: 0in;">cypide1: Cypress 82C693 IDE Controller
(rev. 0x00)</p>
<p style=3D"margin-bottom: 0in;">cypide1: hardware does not support DMA</p>
<p style=3D"margin-bottom: 0in;">cypide1: primary channel wired to
compatibility mode</p>
<p style=3D"margin-bottom: 0in;">cypide1: secondary channel interrupting
at isa irq 15</p>
<p style=3D"margin-bottom: 0in;">atabus1 at cypide1 channel 0</p>
<p style=3D"margin-bottom: 0in;">ohci0 at pci0 dev 5 function 3: Contaq
Microsystems 82C693 PCI-ISA Bridge (rev. 0x00)</p>
<p style=3D"margin-bottom: 0in;">ohci0: interrupting at isa irq 10</p>
<p style=3D"margin-bottom: 0in;">ohci0: OHCI version 1.0, legacy support</p=
>
<p style=3D"margin-bottom: 0in;">usb0 at ohci0: USB revision 1.0</p>
<p style=3D"margin-bottom: 0in;">uhub0 at usb0</p>
<p style=3D"margin-bottom: 0in;">uhub0: Contaq Microsys OHCI root hub,
class 9/0, rev 1.00/1.00, addr 1</p>
<p style=3D"margin-bottom: 0in;">uhub0: 2 ports with 2 removable, self
powered</p>
<p style=3D"margin-bottom: 0in;">ahc0 at pci0 dev 6 function 0: Adaptec
aic7895 Ultra SCSI adapter</p>
<p style=3D"margin-bottom: 0in;">ahc0: interrupting at dec 6600 irq 19</p>
<p style=3D"margin-bottom: 0in;">ahc0: aic7895C: Ultra Wide Channel A,
SCSI Id=3D7, 32/253 SCBs</p>
<p style=3D"margin-bottom: 0in;">scsibus0 at ahc0: 16 targets, 8 luns
per target</p>
<p style=3D"margin-bottom: 0in;">ahc1 at pci0 dev 6 function 1: Adaptec
aic7895 Ultra SCSI adapter</p>
<p style=3D"margin-bottom: 0in;">ahc1: interrupting at dec 6600 irq 18</p>
<p style=3D"margin-bottom: 0in;">ahc1: aic7895C: Ultra Wide Channel B,
SCSI Id=3D7, 32/253 SCBs</p>
<p style=3D"margin-bottom: 0in;">scsibus1 at ahc1: 16 targets, 8 luns
per target</p>
<p style=3D"margin-bottom: 0in;">vga0 at pci0 dev 7 function 0: 3D Labs
GLINT Permedia 3 (rev. 0x01)</p>
<p style=3D"margin-bottom: 0in;">wsdisplay0 at vga0 kbdmux 1: console
(80x25, vt100 emulation)</p>
<p style=3D"margin-bottom: 0in;">wsmux1: connecting to wsdisplay0</p>
<p style=3D"margin-bottom: 0in;">isa0 at sio0</p>
<p style=3D"margin-bottom: 0in;">lpt0 at isa0 port 0x3bc-0x3bf irq 7</p>
<p style=3D"margin-bottom: 0in;">com0 at isa0 port 0x3f8-0x3ff irq 4:
ns16550a, working fifo</p>
<p style=3D"margin-bottom: 0in;">com1 at isa0 port 0x2f8-0x2ff irq 3:
ns16550a, working fifo</p>
<p style=3D"margin-bottom: 0in;">pckbc0 at isa0 port 0x60-0x64</p>
<p style=3D"margin-bottom: 0in;">pckbd0 at pckbc0 (kbd slot)</p>
<p style=3D"margin-bottom: 0in;">pckbc0: using irq 1 for kbd slot</p>
<p style=3D"margin-bottom: 0in;">wskbd0 at pckbd0: console keyboard,
using wsdisplay0</p>
<p style=3D"margin-bottom: 0in;">pms0 at pckbc0 (aux slot)</p>
<p style=3D"margin-bottom: 0in;">pckbc0: using irq 12 for aux slot</p>
<p style=3D"margin-bottom: 0in;">wsmouse0 at pms0 mux 0</p>
<p style=3D"margin-bottom: 0in;">attimer0 at isa0 port 0x40-0x43: AT
Timer</p>
<p style=3D"margin-bottom: 0in;">pcppi0 at isa0 port 0x61</p>
<p style=3D"margin-bottom: 0in;">pcppi0: children must have an explicit
unit</p>
<p style=3D"margin-bottom: 0in;">midi0 at pcppi0: PC speaker
(CPU-intensive output)</p>
<p style=3D"margin-bottom: 0in;">spkr0 at pcppi0</p>
<p style=3D"margin-bottom: 0in;">isabeep0 at pcppi0</p>
<p style=3D"margin-bottom: 0in;">fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq
2</p>
<p style=3D"margin-bottom: 0in;">mcclock0 at isa0 port 0x70-0x71:
mc146818 or compatible</p>
<p style=3D"margin-bottom: 0in;">pcppi0: attached to attimer0</p>
<p style=3D"margin-bottom: 0in;">tsp1 at tsc0</p>
<p style=3D"margin-bottom: 0in;">pci1 at tsp1 bus 0</p>
<p style=3D"margin-bottom: 0in;">pci1: i/o space, memory space enabled,
rd/line, rd/mult, wr/inv ok</p>
<p style=3D"margin-bottom: 0in;">esiop0 at pci1 dev 7 function 0:
Symbios Logic 53c895 (ultra2-wide scsi)</p>
<p style=3D"margin-bottom: 0in;">esiop0: using on-board RAM</p>
<p style=3D"margin-bottom: 0in;">esiop0: interrupting at dec 6600 irq 47</p=
>
<p style=3D"margin-bottom: 0in;">scsibus2 at esiop0: 16 targets, 8 luns
per target</p>
<p style=3D"margin-bottom: 0in;">fxp0 at pci1 dev 9 function 0: i82559
Ethernet, rev 8</p>
<p style=3D"margin-bottom: 0in;">fxp0: interrupting at dec 6600 irq 39</p>
<p style=3D"margin-bottom: 0in;">fxp0: Ethernet address
00:50:8b:ae:dc:8a</p>
<p style=3D"margin-bottom: 0in;">inphy0 at fxp0 phy 1: i82555 10/100
media interface, rev. 4</p>
<p style=3D"margin-bottom: 0in;">inphy0: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto</p>
<p style=3D"margin-bottom: 0in;">fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2
head, 18 sec</p>
<p style=3D"margin-bottom: 0in;">Kernelized RAIDframe activated</p>
<p style=3D"margin-bottom: 0in;">stray isa irq 14</p>
<p style=3D"margin-bottom: 0in;">scsibus0: waiting 2 seconds for devices
to settle...</p>
<p style=3D"margin-bottom: 0in;">scsibus1: waiting 2 seconds for devices
to settle...</p>
<p style=3D"margin-bottom: 0in;">scsibus2: waiting 2 seconds for devices
to settle...</p>
<p style=3D"margin-bottom: 0in;">atapibus0 at atabus0: 2 targets</p>
<p style=3D"margin-bottom: 0in;">cd0 at atapibus0 drive 0: <CD-224E,
, 9.5B> cdrom removable</p>
<p style=3D"margin-bottom: 0in;">cd0: 32-bit data port</p>
<p style=3D"margin-bottom: 0in;">cd0: drive supports PIO mode 4, DMA
mode 2</p>
<p style=3D"margin-bottom: 0in;">cd0(cypide0:0:0): using PIO mode 4, DMA
mode 2 (using DMA)</p>
<p style=3D"margin-bottom: 0in;">sd0 at scsibus2 target 0 lun 0:
<COMPAQ, BD0366459B, B010> disk fixed</p>
<p style=3D"margin-bottom: 0in;">sd0: 34732 MB, 14002 cyl, 20 head, 254
sec, 512 bytes/sect x 71132000 sectors</p>
<p style=3D"margin-bottom: 0in;">sd0: sync (25.00ns offset 31), 16-bit
(80.000MB/s) transfers, tagged queueing</p>
<p style=3D"margin-bottom: 0in;">sd1 at scsibus2 target 1 lun 0:
<COMPAQ, BD0366459B, B010> disk fixed</p>
<p style=3D"margin-bottom: 0in;">sd1: 34732 MB, 14002 cyl, 20 head, 254
sec, 512 bytes/sect x 71132000 sectors</p>
<p style=3D"margin-bottom: 0in;">sd1: sync (25.00ns offset 31), 16-bit
(80.000MB/s) transfers, tagged queueing</p>
<p style=3D"margin-bottom: 0in;">sd2 at scsibus2 target 2 lun 0:
<COMPAQ, BD0366459B, B010> disk fixed</p>
<p style=3D"margin-bottom: 0in;">sd2: 34732 MB, 14002 cyl, 20 head, 254
sec, 512 bytes/sect x 71132000 sectors</p>
<p style=3D"margin-bottom: 0in;">sd2: sync (25.00ns offset 31), 16-bit
(80.000MB/s) transfers, tagged queueing</p>
<p style=3D"margin-bottom: 0in;">sd3 at scsibus2 target 3 lun 0:
<COMPAQ, BD0366459B, B010> disk fixed</p>
<p style=3D"margin-bottom: 0in;">sd3: 34732 MB, 14002 cyl, 20 head, 254
sec, 512 bytes/sect x 71132000 sectors</p>
<p style=3D"margin-bottom: 0in;">sd3: sync (25.00ns offset 31), 16-bit
(80.000MB/s) transfers, tagged queueing</p>
<p style=3D"margin-bottom: 0in;">sd4 at scsibus2 target 4 lun 0:
<COMPAQ, BD0366459B, B010> disk fixed</p>
<p style=3D"margin-bottom: 0in;">sd4: 34732 MB, 14002 cyl, 20 head, 254
sec, 512 bytes/sect x 71132000 sectors</p>
<p style=3D"margin-bottom: 0in;">sd4: sync (25.00ns offset 31), 16-bit
(80.000MB/s) transfers, tagged queueing</p>
<p style=3D"margin-bottom: 0in;">raid0: RAID Level 1</p>
<p style=3D"margin-bottom: 0in;">raid0: Components: /dev/sd0a /dev/sd2a</p>
<p style=3D"margin-bottom: 0in;">raid0: Total Sectors: 4460160 (2177 MB)</p=
>
<p style=3D"margin-bottom: 0in;">raid1: RAID Level 1</p>
<p style=3D"margin-bottom: 0in;">raid1: Components: /dev/sd1a /dev/sd3a</p>
<p style=3D"margin-bottom: 0in;">raid1: Total Sectors: 4460160 (2177 MB)</p=
>
<p style=3D"margin-bottom: 0in;">raid2: RAID Level 5</p>
<p style=3D"margin-bottom: 0in;">raid2: Components: /dev/sd0d /dev/sd2d
/dev/sd3d /dev/sd4d</p>
<p style=3D"margin-bottom: 0in;">raid2: Total Sectors: 200015040 (97663
MB)</p>
<p style=3D"margin-bottom: 0in;">root on raid0a dumps on raid0b</p>
<p style=3D"margin-bottom: 0in;">root file system type: ffs</p>
<p style=3D"margin-bottom: 0in;">WARNING: clock gained 2 days -- CHECK
AND RESET THE DATE!</p>
<p style=3D"margin-bottom: 0in;">wsdisplay0: screen 1 added (80x25,
vt100 emulation)</p>
<p style=3D"margin-bottom: 0in;">wsdisplay0: screen 2 added (80x25,
vt100 emulation)</p>
<p style=3D"margin-bottom: 0in;">wsdisplay0: screen 3 added (80x25,
vt100 emulation)</p>
<p style=3D"margin-bottom: 0in;">wsdisplay0: screen 4 added (80x25,
vt100 emulation)</p>
----<br><br><br><br><br>One more thing that might be of interest: the /dev/=
md0a from the bootcd works and gives me a working environment, but wh=
en I try to mount /dev/cd0a /mnt, I get<br><br>stray isa irq 14<br><br>the =
cd spins and everything hangs.<br>
<br><br><br><br><div class=3D"gmail_quote">On Thu, Feb 12, 2009 at 1:25 PM,=
Manuel Bouyer <span dir=3D"ltr"><<a
href=3D"mailto:bouyer%antioche.eu.o@localhost=
rg">bouyer%antioche.eu.org@localhost</a>></span> wrote:<br><blockquote
class=3D"gm=
ail_quote" style=3D"border-left: 1px solid rgb(204, 204, 204); margin: 0pt =
0pt 0pt 0.8ex; padding-left: 1ex;">
<div class=3D"Ih2E3d">The following reply was made to PR port-alpha/40604; =
it has been noted by GNATS.<br>
<br>
</div>From: Manuel Bouyer <<a
href=3D"mailto:bouyer%antioche.eu.org@localhost";>bou=
yer%antioche.eu.org@localhost</a>><br>
<div class=3D"Ih2E3d">To: gnats-bugs%NetBSD.org@localhost<br>
</div>Cc: port-alpha-maintainer%NetBSD.org@localhost,
gnats-admin%NetBSD.org@localhost,<br>
netbsd-bugs%NetBSD.org@localhost<br>
<div class=3D"Ih2E3d">Subject: Re: port-alpha/40604: AlphaServer DS20E lose=
s HDs and other Drives<br>
when adding 1 GB more RAM<br>
</div>Date: Thu, 12 Feb 2009 16:21:15 +0100<br>
<br>
On Tue, Feb 10, 2009 at 10:55:00PM +0000, <a href=3D"mailto:polimarco=
@gmail.com">polimarco%gmail.com@localhost</a> wrote:<br>
> [...]<br>
> What wasn't my surprise in the next boot, when I was faced w=
ith a mysterious<br>
<div class=3D"Ih2E3d"> ><br>
> -----<br>
> probe(esiop0:0:0:0): request sense for a request sense ?<br>
> probe(esiop0:0:0:0): request sense failed with error 22<br>
> probe(esiop0:0:0:0): generic HBA error<br>
> -----<br>
<br>
</div> Do you have messages from the scsi layer or controller before t=
his one ?<br>
<br>
--<br>
<font color=3D"#888888"> Manuel Bouyer, LIP6, Universite Paris VI. &nb=
sp; <a
href=3D"mailto:Manuel.Bouyer%lip6.fr@localhost";>Ma=
nuel.Bouyer%lip6.fr@localhost</a><br>
NetBSD: 26 ans d'experience feront toujours la dif=
ference<br>
--<br>
<br>
</font></blockquote></div><br>
--00163628395ebd8adb0462c0b7dd--
Home |
Main Index |
Thread Index |
Old Index