[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/38299: bioctl problem with arcmsr
>Synopsis: bioctl reports invalid status for working drives
>Arrival-Date: Wed Mar 26 04:25:01 +0000 2008
>Originator: Hiroyuki Bessho
>Release: NetBSD 4.99.55
System: NetBSD 061kihada.genetec.local 4.99.55 NetBSD 4.99.55 (GENERIC) #0: Fri
Mar 21 18:40:34 JST 2008
I have an Areca ARC-1120 RAID controller installed on dual Opteraon
box. I created a RAID set with 5 disks, which is working fine.
According to the BIOS RAID manager, there is no problem with the
disks, but "bioctl arcmsr0 show disks" command reports errors:
# bioctl arcmsr0 show disks
Disk Model/Serial Status Size Location
0 [ ] Invalid 0B 0:0.0 noencl
1 [ ] Invalid 0B 0:0.0 noencl
2 [ ] Invalid 0B 0:0.0 noencl
4 [ST3250820AS 3.AAD ] Online 233G 0:4.0 noencl
6 [ST3250820AS 3.AAD ] Online 233G 0:6.0 noencl
Disk #0, 1, and 2 are the same model; Maxtor 7Y250M0.
On the console, I had multiple messages like:
arc_bio_disk_filldata: unknown disk device_state: 0x88
I also tried FreeBSD software provided by Areca, and found no problem.
There is the same problem on NetBSD 4.0.
run "bioctl arcmsr0 show disks"
Main Index |
Thread Index |