The following reply was made to PR port-i386/36923; it has been noted by GNATS.

From: "ross barnes" <ross.p.barnes@gmail.com>
To: gnats-bugs@netbsd.org
Cc: port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,
	netbsd-bugs@netbsd.org
Subject: Re: port-i386/36923: console error on NetBSD 4.0 RC1
Date: Thu, 6 Sep 2007 15:06:20 +0100

 below is the uname and dmesg...
 
 NetBSD  4.0_RC1 NetBSD 4.0_RC1 (GENERIC_LAPTOP) #0: Sat Sep  1
 15:31:42 PDT 2007
 builds@wb42:/home/builds/ab/netbsd-4-0-RC1/i386/200709011431Z-obj/home/builds/ab/netbsd-4-0-RC1/src/sys/arch/i386/compile/GENERIC_LAPTOP
 i386
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.0_RC1 (GENERIC_LAPTOP) #0: Sat Sep  1 15:31:42 PDT 2007
 	builds@wb42:/home/builds/ab/netbsd-4-0-RC1/i386/200709011431Z-obj/home/builds/ab/netbsd-4-0-RC1/src/sys/arch/i386/compile/GENERIC_LAPTOP
 total memory = 2038 MB
 rbus: rbus_min_start set to 0x80000000
 avail memory = 1994 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 BIOS32 rev. 0 found at 0xfd670
 PCI BIOS rev. 2.1 found at 0xfd8e3
 pcibios: config mechanism [1][x], special cycles [x][x], last bus 6
 PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 240 bytes (13 entries)
 PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge
 compatible)
 ------------------------------------------
   device vendor product pin PIRQ IRQ stage
 ------------------------------------------
 000:02:0 0x8086 0x27a2   A  0x00   7  0    already assigned
 000:27:0 0x8086 0x27d8   A  0x06  10  0    already assigned
 000:28:0 0x8086 0x27d0   A  0x01  11  0    already assigned
 000:28:1 0x8086 0x27d2   B  0x00   7  0    already assigned
 000:29:0 0x8086 0x27c8   A  0x07   5  0    already assigned
 000:29:1 0x8086 0x27c9   B  0x03  10  0    already assigned
 000:29:2 0x8086 0x27ca   C  0x02  11  0    already assigned
 000:29:3 0x8086 0x27cb   D  0x00   7  0    already assigned
 000:29:7 0x8086 0x27cc   A  0x07   5  0    already assigned
 000:31:2 0x8086 0x27c4   B  0x03  10  0    fixed up
 000:31:3 0x8086 0x27da   B  0x03  10  0    already assigned
 003:00:0 0x8086 0x4227   A  0x01  11  0    already assigned
 005:01:0 0x10ec 0x8139   A  0x05  10  0    already assigned
 005:04:0 0x1524 0x1410   A  0x00   7  0    already assigned
 ------------------------------------------
 mainbus0 (root)
 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
 pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: Intel Pentium M (Yonah) (686-class), 1662.68 MHz, id 0x6e8
 cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
 cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu0: features2 c189<SSE3,MONITOR,EST,TM2,xTPR>
 cpu0: "Genuine Intel(R) CPU           T2300  @ 1.66GHz"
 cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
 cpu0: L2 cache 2 MB 64B/line 8-way
 cpu0: using thermal monitor 1
 cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
 cpu0: unknown Enhanced SpeedStep CPU.
 cpu0: using only highest and lowest power states.
 cpu0: Enhanced SpeedStep frequencies available (MHz): 1667 1000
 cpu0: 64 page colors
 cpu at mainbus0: not configured
 ioapic at mainbus0: not configured
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20060217
 acpi0: X/RSDT: OemId <LENOVO,TP-61   ,00000020>, AslId < LTP,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 7
 LNKG: ACPI: Found matching pin for 0.27.INTA at func 0: 10
 LNKB: ACPI: Found matching pin for 0.28.INTA at func 0: 11
 LNKA: ACPI: Found matching pin for 0.28.INTB at func 1: 7
 LNKH: ACPI: Found matching pin for 0.29.INTA at func 0: 5
 LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 10
 LNKD: BIOS IRQ 10 for 0.29.INTB is invalid
 LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
 LNKC: BIOS IRQ 11 for 0.29.INTC is invalid
 LNKA: ACPI: Found matching pin for 0.29.INTD at func 3: 7
 LNKD: ACPI: Found matching pin for 0.31.INTB at func 2: 10
 LNKD: BIOS IRQ 10 for 0.31.INTB is invalid
 LNKB: ACPI: Found matching pin for 2.0.INTA at func 0: 11
 LNKF: ACPI: Found matching pin for 3.1.INTA at func 0: 10
 LNKF: BIOS IRQ 10 for 3.1.INTA is invalid
 LNKA: ACPI: Found matching pin for 3.4.INTA at func 0: 7
 LNKG: ACPI: Found matching pin for 3.6.INTA at func 0: 7
 LNKG: BIOS IRQ 7 for 3.6.INTA does not match previous BIOS IRQ 10
 LNKH: ACPI: Found matching pin for 3.6.INTB at func 1: 7
 LNKH: BIOS IRQ 7 for 3.6.INTB does not match previous BIOS IRQ 5
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
 PNP0A08 at acpi0 not configured
 PNP0C02 at acpi0 not configured
 acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 PNP0C0F at acpi0 not configured
 acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
 acpiec0: io 0x62,0x66
 PNP0200 at acpi0 not configured
 INT0800 at acpi0 not configured
 PNP0103 at acpi0 not configured
 PNP0000 at acpi0 not configured
 PNP0C04 at acpi0 not configured
 PNP0C02 at acpi0 not configured
 PNP0C02 at acpi0 not configured
 PNP0B00 at acpi0 not configured
 PNP0100 at acpi0 not configured
 acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
 PNP0303 at acpi0 not configured
 PNP0F13 at acpi0 not configured
 acpitz0 at acpi0: ACPI Thermal Zone
 acpitz0: unable to get polling interval; using default of 30.0s
 failed getting _AL0acpitz0: passive cooling mode only
 acpitz0: critical 102.0C passive 30.0C
 apm0 at acpi0: Power Management spec V1.2
 acpiec0: EcRead: timeout waiting for EC to process read command
 ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
 [EmbeddedControl] [20060217]
 ACPI Error (psparse-0626): Method parse/execution failed
 [\_SB_.PCI0.LPCB.ACAD._PSR] (Node 0xc2e2c8c0), AE_ERROR
 acpiec0: EcRead: timeout waiting for EC to process read command
 ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
 [EmbeddedControl] [20060217]
 ACPI Error (psparse-0626): Method parse/execution failed
 [\_SB_.PCI0.LPCB.ACAD._PSR] (Node 0xc2e2c8c0), AE_ERROR
 WARNING: Callback scheduled before sysmon task queue thread present.
 WARNING: Callback scheduled before sysmon task queue thread present.
 acpiec0: EcRead: timeout waiting for EC to process read command
 ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
 [EmbeddedControl] [20060217]
 ACPI Exception (dswexec-0568): AE_ERROR, While resolving operands for
 [AE_NOT_CONFIGURED] [20060217]
 ACPI Error (psparse-0626): Method parse/execution failed
 [\_SB_.PCI0.LPCB.BAT1._BIF] (Node 0xc2e30420), AE_ERROR
 acpibat0: failed to evaluate _BIF: AE_ERROR
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
 agp0 at pchb0: detected 7932k stolen memory
 agp0: aperture at 0xc0000000, size 0x10000000
 vga1 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated
 Graphics Device (rev. 0x03)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous
 display, revision 0x03) at pci0 dev 2 function 1 not configured
 azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
 azalia0: interrupting at irq 10
 azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
 azalia0: host: High Definition Audio rev. 1.0
 ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI
 Adapter (rev. 0x02)
 wpi0: interrupting at irq 11
 , MoW1, address 00:13:02:99:d0:71
 wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller
 (rev. 0x02)
 uhci0: interrupting at irq 5
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller
 (rev. 0x02)
 LNKD: Picked IRQ 9 with weight 0
 uhci1: interrupting at irq 9
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller
 (rev. 0x02)
 LNKC: Picked IRQ 5 with weight 2
 uhci2: interrupting at irq 5
 usb2 at uhci2: USB revision 1.0
 uhub2 at usb2
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller
 (rev. 0x02)
 uhci3: interrupting at irq 7
 usb3 at uhci3: USB revision 1.0
 uhub3 at usb3
 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller
 (rev. 0x02)
 ehci0: interrupting at irq 5
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 uhub4 at usb4
 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled
 rtk0 at pci3 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
 LNKF: Picked IRQ 11 with weight 3
 rtk0: interrupting at irq 11
 rtk0: Ethernet address 00:0f:b0:c9:68:40
 rlphy0 at rtk0 phy 7: Realtek internal PHY
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 cbb0 at pci3 dev 4 function 0: ENE Technology CB1410 CardBus
 Controller (rev. 0x01)
 Ricoh product 0x0832 (Firewire serial bus, interface 0x10) at pci3 dev
 6 function 0 not configured
 Ricoh product 0x0822 (SD Host Controller system, revision 0x19) at
 pci3 dev 6 function 1 not configured
 Ricoh product 0x0843 (miscellaneous system, revision 0x01) at pci3 dev
 6 function 2 not configured
 Ricoh product 0x0592 (miscellaneous system, revision 0x0a) at pci3 dev
 6 function 3 not configured
 Ricoh product 0x0852 (miscellaneous system, revision 0x05) at pci3 dev
 6 function 4 not configured
 cbb0: interrupting at irq 7
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 4
 pcmcia0 at cardslot0
 pcib0 at pci0 dev 31 function 0
 pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
 piixide0 at pci0 dev 31 function 2
 piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel wired to compatibility mode
 piixide0: primary channel interrupting at irq 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel wired to compatibility mode
 piixide0: secondary channel interrupting at irq 15
 atabus1 at piixide0 channel 1
 Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x02) at
 pci0 dev 31 function 3 not configured
 isa0 at pcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pms0: Synaptics touchpad version 6.2
 pms0: Palm detect, Multi-finger
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 pcppi0: children must have an explicit unit
 midi0 at pcppi0: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff
 npx0: reported by CPUID; using exception 16
 pcppi0: attached to attimer0
 isapnp0: no ISA Plug 'n Play devices found
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 azalia0: codec[0]: 0x11d4/0x1986 (rev. 5.0)
 azalia0: codec[0]: High Definition Audio rev. 1.0
 azalia0: playback: max channels=6, encodings=1<PCM>
 azalia0: playback: PCM
 formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
 azalia0: recording: max channels=2, encodings=1<PCM>
 azalia0: recording: PCM
 formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
 azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
 azalia0: codec[1]: High Definition Audio rev. 1.0
 azalia0: codec[1]: No support for modem function groups
 azalia0: codec[1] has no audio function groups
 audio0 at azalia0: full duplex, independent
 Kernelized RAIDframe activated
 ath0 at cardbus0 function 0
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: mac 7.8 phy 4.5 radio 5.6
 ugen0 at uhub4 port 1
 ugen0: vendor 0x1737 product 0x0039, rev 2.00/0.01, addr 2
 ubt0 at uhub0 port 2 configuration 1 interface 0
 ubt0: Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, rev 2.00/1.00, addr 2
 wd0 at atabus0 drive 0: <TOSHIBA MK8032GSX>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.00>
 cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 
 On 9/5/07, Juan RP <juan@xtrarom.org> wrote:
 > The following reply was made to PR port-i386/36923; it has been noted by GNATS.
 >
 > From: Juan RP <juan@xtrarom.org>
 > To: gnats-bugs@NetBSD.org
 > Cc: ross.p.barnes@gmail.com
 > Subject: Re: port-i386/36923: console error on NetBSD 4.0 RC1
 > Date: Wed, 5 Sep 2007 21:15:32 +0200
 >
 >  On Wed,  5 Sep 2007 19:00:03 +0000 (UTC)
 >  ross.p.barnes@gmail.com wrote:
 >
 >  > >Release:        4.0 RC1
 >  > >Organization:
 >  > >Environment:
 >  > i386 Lenovo laptop - intel T2300
 >  > >Description:
 >  > I want to report that every once in a while, I get the following on my
 >  > console. It does not crash the system and is not critical. I just want to
 >  > report it.
 >  >
 >  > failed getting _AL0
 >
 >  Can you please add more information? full dmesg, for example.
 >
 >  --
 >  Juan Romero Pardines   - The NetBSD Project
 >  http://plog.xtrarom.org        - NetBSD/pkgsrc news in Spanish
 >
 >