below is the uname and dmesg...

NetBSD  4.0_RC1 NetBSD 4.0_RC1 (GENERIC_LAPTOP) #0: Sat Sep  1
15:31:42 PDT 2007
builds@wb42:/home/builds/ab/netbsd-4-0-RC1/i386/200709011431Z-obj/home/builds/ab/netbsd-4-0-RC1/src/sys/arch/i386/compile/GENERIC_LAPTOP
i386


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC1 (GENERIC_LAPTOP) #0: Sat Sep  1 15:31:42 PDT 2007
	builds@wb42:/home/builds/ab/netbsd-4-0-RC1/i386/200709011431Z-obj/home/builds/ab/netbsd-4-0-RC1/src/sys/arch/i386/compile/GENERIC_LAPTOP
total memory = 2038 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 1994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd670
PCI BIOS rev. 2.1 found at 0xfd8e3
pcibios: config mechanism [1][x], special cycles [x][x], last bus 6
PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 240 bytes (13 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge
compatible)
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x27a2   A  0x00   7  0    already assigned
000:27:0 0x8086 0x27d8   A  0x06  10  0    already assigned
000:28:0 0x8086 0x27d0   A  0x01  11  0    already assigned
000:28:1 0x8086 0x27d2   B  0x00   7  0    already assigned
000:29:0 0x8086 0x27c8   A  0x07   5  0    already assigned
000:29:1 0x8086 0x27c9   B  0x03  10  0    already assigned
000:29:2 0x8086 0x27ca   C  0x02  11  0    already assigned
000:29:3 0x8086 0x27cb   D  0x00   7  0    already assigned
000:29:7 0x8086 0x27cc   A  0x07   5  0    already assigned
000:31:2 0x8086 0x27c4   B  0x03  10  0    fixed up
000:31:3 0x8086 0x27da   B  0x03  10  0    already assigned
003:00:0 0x8086 0x4227   A  0x01  11  0    already assigned
005:01:0 0x10ec 0x8139   A  0x05  10  0    already assigned
005:04:0 0x1524 0x1410   A  0x00   7  0    already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1662.68 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c189<SSE3,MONITOR,EST,TM2,xTPR>
cpu0: "Genuine Intel(R) CPU           T2300  @ 1.66GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1667 1000
cpu0: 64 page colors
cpu at mainbus0: not configured
ioapic at mainbus0: not configured
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <LENOVO,TP-61   ,00000020>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 7
LNKG: ACPI: Found matching pin for 0.27.INTA at func 0: 10
LNKB: ACPI: Found matching pin for 0.28.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.28.INTB at func 1: 7
LNKH: ACPI: Found matching pin for 0.29.INTA at func 0: 5
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 10
LNKD: BIOS IRQ 10 for 0.29.INTB is invalid
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKC: BIOS IRQ 11 for 0.29.INTC is invalid
LNKA: ACPI: Found matching pin for 0.29.INTD at func 3: 7
LNKD: ACPI: Found matching pin for 0.31.INTB at func 2: 10
LNKD: BIOS IRQ 10 for 0.31.INTB is invalid
LNKB: ACPI: Found matching pin for 2.0.INTA at func 0: 11
LNKF: ACPI: Found matching pin for 3.1.INTA at func 0: 10
LNKF: BIOS IRQ 10 for 3.1.INTA is invalid
LNKA: ACPI: Found matching pin for 3.4.INTA at func 0: 7
LNKG: ACPI: Found matching pin for 3.6.INTA at func 0: 7
LNKG: BIOS IRQ 7 for 3.6.INTA does not match previous BIOS IRQ 10
LNKH: ACPI: Found matching pin for 3.6.INTB at func 1: 7
LNKH: BIOS IRQ 7 for 3.6.INTB does not match previous BIOS IRQ 5
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A08 at acpi0 not configured
PNP0C02 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PNP0200 at acpi0 not configured
INT0800 at acpi0 not configured
PNP0103 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0100 at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
PNP0303 at acpi0 not configured
PNP0F13 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
failed getting _AL0acpitz0: passive cooling mode only
acpitz0: critical 102.0C passive 30.0C
apm0 at acpi0: Power Management spec V1.2
acpiec0: EcRead: timeout waiting for EC to process read command
ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
[EmbeddedControl] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed
[\_SB_.PCI0.LPCB.ACAD._PSR] (Node 0xc2e2c8c0), AE_ERROR
acpiec0: EcRead: timeout waiting for EC to process read command
ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
[EmbeddedControl] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed
[\_SB_.PCI0.LPCB.ACAD._PSR] (Node 0xc2e2c8c0), AE_ERROR
WARNING: Callback scheduled before sysmon task queue thread present.
WARNING: Callback scheduled before sysmon task queue thread present.
acpiec0: EcRead: timeout waiting for EC to process read command
ACPI Exception (evregion-0521): AE_ERROR, Returned by Handler for
[EmbeddedControl] [20060217]
ACPI Exception (dswexec-0568): AE_ERROR, While resolving operands for
[AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed
[\_SB_.PCI0.LPCB.BAT1._BIF] (Node 0xc2e30420), AE_ERROR
acpibat0: failed to evaluate _BIF: AE_ERROR
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated
Graphics Device (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous
display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 10
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI
Adapter (rev. 0x02)
wpi0: interrupting at irq 11
, MoW1, address 00:13:02:99:d0:71
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller
(rev. 0x02)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller
(rev. 0x02)
LNKD: Picked IRQ 9 with weight 0
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller
(rev. 0x02)
LNKC: Picked IRQ 5 with weight 2
uhci2: interrupting at irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller
(rev. 0x02)
uhci3: interrupting at irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller
(rev. 0x02)
ehci0: interrupting at irq 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
rtk0 at pci3 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
LNKF: Picked IRQ 11 with weight 3
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0f:b0:c9:68:40
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci3 dev 4 function 0: ENE Technology CB1410 CardBus
Controller (rev. 0x01)
Ricoh product 0x0832 (Firewire serial bus, interface 0x10) at pci3 dev
6 function 0 not configured
Ricoh product 0x0822 (SD Host Controller system, revision 0x19) at
pci3 dev 6 function 1 not configured
Ricoh product 0x0843 (miscellaneous system, revision 0x01) at pci3 dev
6 function 2 not configured
Ricoh product 0x0592 (miscellaneous system, revision 0x0a) at pci3 dev
6 function 3 not configured
Ricoh product 0x0852 (miscellaneous system, revision 0x05) at pci3 dev
6 function 4 not configured
cbb0: interrupting at irq 7
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x02) at
pci0 dev 31 function 3 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x11d4/0x1986 (rev. 5.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=6, encodings=1<PCM>
azalia0: playback: PCM
formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM
formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
ath0 at cardbus0 function 0
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 7.8 phy 4.5 radio 5.6
ugen0 at uhub4 port 1
ugen0: vendor 0x1737 product 0x0039, rev 2.00/0.01, addr 2
ubt0 at uhub0 port 2 configuration 1 interface 0
ubt0: Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, rev 2.00/1.00, addr 2
wd0 at atabus0 drive 0: <TOSHIBA MK8032GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.00>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


On 9/5/07, Juan RP <juan@xtrarom.org> wrote:
> The following reply was made to PR port-i386/36923; it has been noted by GNATS.
>
> From: Juan RP <juan@xtrarom.org>
> To: gnats-bugs@NetBSD.org
> Cc: ross.p.barnes@gmail.com
> Subject: Re: port-i386/36923: console error on NetBSD 4.0 RC1
> Date: Wed, 5 Sep 2007 21:15:32 +0200
>
>  On Wed,  5 Sep 2007 19:00:03 +0000 (UTC)
>  ross.p.barnes@gmail.com wrote:
>
>  > >Release:        4.0 RC1
>  > >Organization:
>  > >Environment:
>  > i386 Lenovo laptop - intel T2300
>  > >Description:
>  > I want to report that every once in a while, I get the following on my
>  > console. It does not crash the system and is not critical. I just want to
>  > report it.
>  >
>  > failed getting _AL0
>
>  Can you please add more information? full dmesg, for example.
>
>  --
>  Juan Romero Pardines   - The NetBSD Project
>  http://plog.xtrarom.org        - NetBSD/pkgsrc news in Spanish
>
>