>Number:         36648
>Category:       port-i386
>Synopsis:       No SATA DVD on viaide, kernel hangs on repeated mount attempts
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Jul 15 01:05:00 +0000 2007
>Originator:     Steve Bowman
>Release:        NetBSD 4.99.23, CVS date 20070713
>Organization:
>Environment:
System: NetBSD icicle 4.99.23 NetBSD 4.99.23 (GENERIC) #0: Fri Jul 13 03:13:39 MST 2007 root@glacier:/usr/obj/sys/arch/i386/compile/GENERIC i386
Architecture: i386
Machine: i386
>Description:
SATA DVD LG model GSA-H62N fails to mount.  Repeated attempts cause
kernel hang.  Output from mount:
  mount -t cd9660 /dev/cd0a /mnt
  mount_cd9660: /dev/cd0a on /mnt: Input/output error
In /var/log/messages:
  /netbsd: viaide0:1:0: lost interrupt
  /netbsd: type: atapi tc_bcount: 32 tc_skip: 0
  /netbsd: viaide0:1:0: bus-master DMA error: missing interrupt, status=0x21
  /netbsd: viaide0:1:0: device timeout, c_bcount=32, c_skip=0
  /netbsd: cd0(viaide0:1:0): generic HBA error
Kernel is current GENERIC; however, both failure to mount and
  eventual hang also occurs with GENERIC.NOACPI and 3.1_STABLE and
  with current GENERIC and 3.1_STABLE with various options such as
  PCI_{ADDR,BUS,INTR}_FIXUP, PCIBIOS, etc. in assorted combinations.
  A few BIOS settings were also tested including BusMaster
  enable/disable.  The drive does work and is currently the boot
  device.  Motherboard is Soyo KT880.  Previous non-SATA DVDROM
  worked.
Dmesg output:
NetBSD 4.99.23 (GENERIC) #0: Fri Jul 13 03:13:39 MST 2007
	root@glacier:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 510 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 491 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon XP 3200+ (686-class), 2205.16 MHz, id 0x6a0
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "AMD Athlon(tm) XP 3200+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: AMD Power Management features: 1<TS>
cpu0: calibrating local timer
cpu0: apic clock running at 400 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 1
ioapic0: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,10000410>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F03): aux port
pckbc2: irq 12
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
lpt3 at acpi0 (PNP0400)
lpt3: io 0x378-0x37f irq 7
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies KT880 CPU to PCI Bridge (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe0000000, size 0xf000000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies KT880 CPU to PCI Bridge (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies KT880 CPU to PCI Bridge (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies KT880 CPU to PCI bridge (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies KT880 CPU to PCI Bridge (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies KT880 CPU to PCI Bridge (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377CE CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: NVIDIA product 0x00f3 (rev. 0xa2)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
vge0 at pci0 dev 7 function 0: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at ioapic0 pin 17 (irq 5)
vge0: Ethernet address: 00:50:2c:0a:4b:ba
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 1
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
fwohci0 at pci0 dev 13 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 19 (irq 3)
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:50:2c:00:00:0a:3b:2f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Acer Labs product 0x5281 (miscellaneous mass storage, interface 0x85, revision 0xa1) at pci0 dev 14 function 0 not configured
Acer Labs product 0x5228 (miscellaneous mass storage, interface 0x85, revision 0xc6) at pci0 dev 14 function 1 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 10)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <ST3250823AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-H62N, K6974GE1051, CL00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus2 drive 0: <Maxtor 92049U6>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 19473 MB, 39566 cyl, 16 head, 63 sec, 512 bytes/sect x 39882528 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd2 at atabus2 drive 1: <IC35L040AVER07-0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 39266 MB, 79780 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd2(viaide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus1 at atabus3: 2 targets
Kernelized RAIDframe activated
viaide1:1:1: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Attempt to mount /dev/cd0a.
>Fix:
No fix nor workaround known.